ECOFLOW Smart Home Panel APP User Manual
- June 4, 2024
- ECOFLOW
Table of Contents
Smart Home Panel APP
User Manual
How to Connect Devices
-
Enable Bluetooth
After supplying power to the SHP, open the front cover and short press the IoT button. Meanwhile, enable Bluetooth and Wi-Fi on the mobile phone. -
Search for devices
Open the Ecoflow app①, click the Add(+) icon in the upper-right corner to search for devices, and tap the device icon with the required serial number (SN) to connect the device.
- If you do not have an EcoFlow account, register it as instructed in the app.
**Internet Setup
**
Enter the name and password of your Wi-fi access to complete the network configuration ① and then enable the IoT mode.
How to Configure Parameters
- Setting up the grid
Select your country and state②, and the system will automatically adapt to the local grid parameters. If there is any error, you can also modify the parameters manually. If the local voltage is less than 120 V, you can enable the split-phase③ function.
If you skip the step of configuring the network, you can view only 7 days of electricity consumption data in the app. You must reconfigure the network before you can view 30-day data.- If you need to reconfigure your location, navigate to “Deceive Homepage > Settings”.
- Setting up split-phase: In areas where the single-phase grid voltage is less than 120 V, you can enable the split-phase function to connect to a high-voltage (240 V) load.
2. Setting up My Home
You need to configure the parameter settings① for 10 household power
circuits, including enabling or disabling each power circuit and setting a
custom name and icon for ach power circuits. When setting the rated current of
a circuit, refer to the rated current of the circuits in the circuit breaker
of SHP. 
3. Setting up the Power Station
Infinity AC1 and AC2 respectively correspond to the charging ports of two
DELTA Pro devices. Set the rated current based on the power circuits connected
to the DELTA Pro charging port. You can also enable the EPS mode in case of
emergencies.
- If you want to adjust the parameters of the power circuit, go to “Device Homepage – ⚙ Settings” in the upper-right corner, and find the circuit option to modify it.
4. Device Wiring Testing
During the initial circuit connection of SHP, the app throws out a Device
Wiring Testing after you have configured the parameters. If you have
reconfigured the circuit connection after using it for a period of time, find
Device Wiring Testing by navigating to “Device Homepage – Settings” in a
timely manner to conduct a self-check so as to
ensure that the circuits are correct.
During Device Wiring Testing, all load circuits in the SHP are
disconnected, and the AC output/input ports of DELTA Pro are off. The self-
check duration is about one second.
If you are prompted with a wiring error, check manually as instructed (as shown in the left figure). If the Device Wiring Testing passes, the app throws out a prompt stating that the check succeeds ¹, and you can start using the SHP with confidence.
- If the device wiring testing passes, you still do not see the prompt stating that the check succeeds, you can take the following measures to solve this issue: If you have configured the network, check whether Wi-Fi is faulty. After confirming that the network is normal, restart Wi-Fi and try again. If you are using the Bluetooth direct connection mode, the self-check passes if you do not see any failure prompt.
Common Functions
After configuring the parameters, you can go to the Device Homepage of the SHP
to quickly try out its common functions.
- Set Automation
You can enjoy a smarter and more stable power consumption environment by configuring a schedule to regularly charge DELTA Pro or regularly switch the power supply mode of the circuit. You can turn on this option by tapping the Add(+) icon in the upper-right corner of the “Automation” page. Emergency backup policy
Emergency backup policy
When the grid encounters an outage ①, the system automatically switches the
selected circuit to battery backup. When the power capacity becomes
insufficient, only the prioritized circuits will be powered. You can adjust the
priority of a circuit by long-tapping the icon for the circuit and dragging it
up or down.
Recharge DELTA Pro regularly
You can freely set the charging period, charging port, and charge level② to
avoid forgetting to charge the device, resulting in insufficient power.
Switch to battery backup regularly
You can regularly switch certain circuits to be powered by DELTA Pro, so as to
stagger the peak power consumption and save your electricity costs.
2. Monitor and control the 10 circuits
On the circuit list page, you can view the power supply mode, real-time
power, and total power consumption of each circuit. Tap the icon for a circuit
to open the details page, where you can view the power consumption data of
each circuit.
- In the case of a grid power outage, if the emergency backup power policy conflicts with the timed power switching policy, the system prioritizes the emergency backup power policy.
- After you set the charge level, the system will charge the power supply to the set value (5% more or less) in the corresponding period. You can set the charging capacity based on your needs.
- Overview of electricity consumption data
On the “Dashboard” page, you can tap the options to view the total electricity consumption, total power station usage, and total grid power usage. In “Usage overview”, you can switch between daily data, weekly data, and monthly data②
- Click ERROR to view the error report. You can instantly find the exact exception of the product and view the correction suggestions for it. If you cannot solve the exception, contact our after-sales customer service with the product SN, error report screenshots, and a simple problem description.
- If you are using the Bluetooth direct connection mode, you can view only 7-day electricity consumption data in the app. You must reconfigure the network before you can view 30-day data.
4. DELTA Pro operation page
On the operation page of DELTA Pro, you can quickly understand the working
status of DELTA Pro. By tapping the “Recharge” button, you can manually charge
the power station, and the system will charge DELTA Pro with a power of 1,600
W, which will be automatically stopped when DELTA Pro is fully charged. You
can also turn off this
option manually.
5. Settings
On the “Settings” page, you can modify various parameters of the device,
including basic information and power station parameters.
- Min power capacity: You can set a minimum discharge level for DELTA Pro. When the power capacity of DELTA Pro is lower than the set value, it stops discharging and enters the standby state, in which case only the charging command is responded.
- If you have reconfigured the wiring of SHP, tap “Device Wiring Testing” to conduct self-check-in in a timely manner to ensure that the wiring is correct.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>