FEIT ELECTRIC S4.5CSFL 1600 Lumen 5000K LED Dusk to Dawn Flood Light Instruction Manual
- June 9, 2024
- Feit Electric
Table of Contents
FEIT ELECTRIC S4.5CSFL 1600 Lumen 5000K LED Dusk to Dawn Flood Light
SINGLE HEAD COMMERCIAL SECURITY FLOOD LIGHT
INSTALLATION INSTRUCTIONS
WARNING: These products may represent a possible shock or fire hazard if improperly installed or attached in any way.
Products should be installed in accordance with the owners manual, current electrical codes and/or the current National Electric Code (NEC).
PARTS INCLUDED
- (1) Single head commercial security flood light
- (1) Nut
- (3) Wire nuts
CAUTION, IMPORTANT SAFETY INSTRUCTIONS – Make sure the supply voltage is
the same as the rated luminaire voltage. Do not install where marked operating
temperatures exceed the ignition temperature of the hazardous atmosphere. Do
not operate in ambient temperatures above those indicated on the luminaire
nameplate. To avoid the risk of fire, explosion, or electric shock, this
product should be installed, inspected and maintained by a qualified
electrician only, in accordance with all applicable electrical codes. Be
certain electrical power is OFF before and during installation and
maintenance.
Note: Save these instructions for future reference.
LIMITED WARRANTY
This product is warranted to be free from defects in workmanship and materials
for up to 5 years from date of purchase.
If it fails to do so, please contact Feit Electric at
info@feit.com or call 1-866 326-BULB (2852) for
instructions on replacement.
Do not return the product to the store.
For comments please write to:
Feit Electric
Customer Service Department
4901 Gregg Road, Pico Rivera, CA 90660
For supply connections use wire rated for at least 90°C
CAUTION: Input 120-277VAC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna. Increase the separation between
the equipment and receiver. Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. Consult the dealer or
an experienced radio/TV technician for help.
WARNING:TURN OFF THE MAIN POWER AT THE CIRCUIT BREAKER BEFORE INSTALLING THE FIXTURE IN ORDER TO PREVENT POSSIBLE ELECTRIC SHOCK.
WARNING: This luminaire should be installed by qualified electrician.
J-Box Mount Installation
- Check the weatherproof cover hole size before starting any installation. The knuckle flood light has a 1/2″ screw thread.
- Install the knuckle flood light into the weather proof cover (not included). Tighten the nut on the knuckle flood light to secure it from moving (Fig A).
- Connect the J-box power supply wires to the knuckle flood wires: hot to black, neutral to white and ground to green (Fig B).
- Mount the weather proof cover onto the J-Box (Fig C).
- To adjust knuckle flood light aiming angle, un-tighten the adjustable screw of knuckle. Do not completely disengage. Hold the knuckle flood light at selected angle and tighten the screw firmly.
- Turn ON power and check for proper operation.
FEIT ELECTRIC COMPANY I PICO RIVERA,
CA I 800-543-3348 I
FAX 562-908-6360 I
www.feit.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>