QGeeM HC1202 USB-C Multifunctional Converter Instruction Manual
- June 9, 2024
- QGeeM
Table of Contents
HC1202 USB-C Multifunctional Converter Instruction Manual
Product introduction:
This product is a smart extended projection screen electronic product,
compatible with the USS 3.1 Type-C interface of Apple computers, tablets and
Android mobile phones and other smart devices.
Supports the content of pictures, videos, movies and sounds on computers,
tablets and mobile phones on TV, projectors and other display devices.
The PD interface of TYPE C connects to the PD charger, which can cherge
computers, tablets and mobile phones. (QC fast charging is not supported)
Two HDMI interfaces support 4K@30HZ UHD display. (Computer support for DP 1.4
ts required)RJ45 interface connects wired network, which can provide network
services for computers, tablets and mobile phones at speeds up to gigabytes.
Two USB 3.0A interfaces are connected to USB 3.0U disk, which can read and
write data of USB 3.0U disk at high speed. They are compatible with USB 2.0,
USB 1.1, mouse, USB 3.0 or USB 2.0 and USB 1.1 keyboard and other USS
devices.
One USB 3.0 TYPE C interface connects the U disk of TYPE C port. It can read
and write data of USB 3.0 U disk at high speed. it is compatile with USB 2.0
and mouse. It can connect USB 3.0 of TYPE C port or USB 2.0 keyboard and
other USS devices.
Two USB 2.0 A interfaces connect USB 2.0 U disk. They can read and write USB
2.0 U disk data at high speed, compatible with USB 1.1, and can connect USB
2.0 or USB 1.1 mouse, keyboard and other USB devices.
SO card card siot and TF cardcard slot, provide card reader function, can
insert SD card and TF card (SD card and TF card can not be used at the same
time, read and write the card data first).
Components:
When you purchase the Portable Solid State Drive. meke sure that all
components have been included in your product package. if any component is
missing or damaged, please contact the original seller directly for heip.
USB-C Multifunctional Comvertet……………………………………………….PCS
Instruction BM UE……………………………………………….PCS
Product parameters:
Product performance parameters
| Item| Specification parameter
---|---|---
1| Type-c male bup port)| Connect the computer
2| Hdmi output| Support resolution: 3840°2160 60He. 192071200. 1920°
1080/1280° 1024. etc.
3| USB 3.0 HUG Transmission spee¢| 5Gbps, downward compatible with USB 2.0.
USB 1.1.
4| PD IN| MAX: 100W
5| Compatible modets| Mac Book. maom. Samsung. Dell. ASUS. HUAWE!,
Lenovo. Google. Samsung $8/S$8+/S9/S9+/S10, HUAWE) Mate 20/P20 And mobile
phones with type-c etc
6| Openers system| Windows X
7| Netwok RJ45| 10/100/1000¢
8| Static power| <450mA+/-20mA
Instructions for:
- Connect the computer to the US83.1 type-c port of the product.
- Use HDMI male head to connect the HDMI master of this product to: projector, TV, monkKor, etc.
- Connect USB 3.0 port to USB device.
- Connect the PD interface of the product to the PD charger.
- Connect the Ethernet port of the product to the wired network.
Notee!:
Connect other US&3.1 Type-C compatible smart devices with the same operation.
Notee2:
When the extemal device connects to HDMI:
-
It can support the same screen mode, that is, the computer and external display are the same:
Windowss PC supports 4K@30H2z when only one HDMi is available, and needs DP 1.4 support from the output terminal of the computer.
Apple supports three HDMis and 4K@30Hz at the same time, requiring DP1.4 to be supported at the output of the computer. -
It can also support split screen mode, Le erended mode, the same or display between computer and external, and the extended mode is supported by Apple system and
Windows system:
Extended mode, single display:
Computer and HDMI] (4K@60Hz) or
Computer and HDMI2 (4K@60Hz)
Extended mode, dual display, three display, four display:
Windows Computer:
Computer + HOMII and HDMI2 (41(030Hi).
Note: (In Windows computer settings, such as Intel graphics card only has
three video signal output streams, need to turn off a monitor, turn off the
computer or display) Examples: computer (turn off display) + HDMII and HDMI2
(1080P)
- Apple Computer: Computer + HDMI1 and HDMI2 (4K(030Hz) extension modes. (Three HDMIs display the same, namely HOMII = HDMI2 )
Attention:
- Because the current output of the new Mac book is about 1_0 A, whe n the load exceeds IA, the computer will start the self protection function. It will be prompted that USB consumes a lot of power and is disabled. Pull the converter off (and turn off the disabled icon or restart) and reinsert it again. Priority should be given to inserting the power-consuming device such as the PO power supply (connec ting hard disk). When it is not connected properly, please connect it. Electrical appliances are used in the Type C base of the product to supply power to computers, hard disks and other equipment.
- When inserting and unplugging the PD adapter, the connected USB device will be disconnected quickly, and then recovered in a few seconds to prevent data loss or damage. Please avoid disconnecting the connection between the PD adapter and the AC power supply when transmitting data.
- This product is designed according to the instant USB 3.1 standard. It may be incompatible with the product or equipment that comes out of the standard after production. &t is a normal phenomenon. if $0, please contact customer service in time.
Product port usage instruction diagram:
- Connect the network When the product Is used on Mac book series devices, Macbook needs to set up the following steps: system prefer-ence network click on ‘4,1’ to create a new service select USB 10/100/1000 LAN create application (click on the application shows USB 10/100/1000 LAN green, has been successfully connected), at this time access to Macbook through the wired Internet Book.
- When the PD charger is not inserted, only one USB mobile hard disk with high current can be loaded. Load current varies greatly among different devices. The following are the reference working currents for related devices:
USB mobile hard disk 550mA-1.5A;
U disk. 200mA-3S0mA;
Mouse: 100mA, game mouse up to 3S0mA;
SD card: 150 mA-300 mA;
Net port: 100mA; HOMI: 350mA-500mA
Computer load protection current is 1.5A. Computer load protection will cause
the external equipment to work interruptively or abnor-mally. In order to
ensure that the load with current exceeding 1.S11 can work normally, It is
necessary to insert a PD charger.
After plugging in the POs, the total current of the PDs to USB power supply is
1500 mA, while the others to the computer charge, so the total current of the
USB device can not exceed 1.5A.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>