Hotpoint 400011543666 Control Panel Wash Cycle Table User Guide
- June 9, 2024
- Hotpoint
Table of Contents
- THANK YOU FOR PURCHASING A HOTPOINT PRODUCT.
- CONTROL PANEL
- WASH CYCLE TABLE
- PRODUCT DESCRIPTION
- DETERGENT DISPENSER
- WASH CYCLES
- FIRST-TIME USE
- DAILY USE
- PAUSING A CYCLE
- OPENING THE DOOR, IF NECESSARY
- CHANGING A RUNNING WASH CYCLE
- AT THE END OF THE WASH CYCLE
- OPTIONS
- KEY LOCK
- TIPS AND SUGGESTIONS
- CARE AND MAINTENANCE
- LOAD BALANCING SYSTEM
- TRANSPORT AND HANDLING
- TROUBLESHOOTING
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Hotpoint 400011543666 Control Panel Wash Cycle Table
THANK YOU FOR PURCHASING A HOTPOINT PRODUCT.
To receive more comprehensive assistance, register the appliance on www.hotpoint.eu/register
Before using the appliance carefully read the Health and Safety guide.
Before using the machine, it is imperative that the transport bolts are
removed. For more detailed instructions on how to remove them, see the
Installation Guide.
! This symbol reminds you to read this instruction manual.
CONTROL PANEL
- ON/OFF button
- START/PAUSE button
- TEMPERATURE button
- ENERGY SAVER button
- DRY ONLY button / Lock button
- DRYING SETTINGS button
- START DELAY button
- SPIN SPEED button
- WASH CYCLE SELECTOR KNOB
DISPLAY INDICATORS
Washing phase
Indicates washing phase of the cycle
Drying phase
Energy Saver activated
Key lock activated
Drying only
Time drying mode
Drying automatic levels
Start delay activated
Door locked ****
WASH CYCLE TABLE
Maximum load 9 kg
Power input in off mode 0.5 W / in left-on mode 8 W
| Detergents and Additives| Recommended detergent| Residual
(***)
| Energy
kWh
| Total water lt| Laundry
---|---|---|---|---|---|---
Wash cycle| Temperature| Maximum spin (r.p.m.)| Max. load for wash cycle (kg)|
Max. load for drying cycle (kg)| Duration (h : m)| Drying| Wash| Fabric
softener| Powder| Liquid
Setting| Range| 2| 3
1| Mixed Wash &Dry| 40 °C| 40 °C| 800| 3,5| 3,5| | **| |
| –| **| –| –| –| –
2| Shirts and T-shirts| 40 °C| 40 °C| 1000| 2,0| 2,0| | |
| | –| | –| –| –| –
3| Pre Iron| –| –| –| 2,0| –| | –| –| –| –| –| –| –| –| –
4| Steam Refresh| –| –| –| 2,0| –| | –| –| –| –| –| –| –| –| –
5| Cotton (2)| 40 °C| – 60 °C| 1400| 9,0| 6,0| 3:55| |
| | | | 49| 1,4| 105| 45
6| Synthetics (3)| 40 °C| – 60 °C| 1200| 4,0| 4,0| 2:55|
| | | | | 35| 0,8| 55| 43
7| Anti Stain Quick| 40 °C| **– 40 °C| 1200| 4,5| 4,5| |
| | | –| | –| –| –| –
8| Anti Stain 40°| 40 °C| **– 40 °C| 1400| 9,0| 6,0| | |
| | –| | –| –| –| –
9| White| 60 °C| – 90 °C| 1400| 9,0| 6,0| 2:45| | |
| | | 49| 0,9| 90| 55
10| Eco 40-60 (1)
(Wash)
| ****
40 °C
| ****
40°C
| 1351| 9,0| 6,0| 3:40| | | | | | 53,5| 0,86| 54| 38
1351| 4,5| 3,0| 2:50| | | | | | 53,5| 0,68| 54| 37
1351| 2,5| –| 2:10| | | | | **| 53,5| 0,46| 40| 34
11| 20°C| 20 °C| **– 20 °C| 1400| 9,0| 6,0| 1:50| | |
| –| | 49| 0,2| 90| 22
12| Delicates| 30 °C| ****– 30 °C| 600
(****)
| 1,0| 1,0| | **| | | –| **| –| –| –| –
13| Wool| 40 °C| **– 40 °C| 800| 2,0| 2,0| | **| |
| –| **| –| –| –| –
14| Rapid 30‘| 30 °C| **– 30 °C| 1200
(****)
| 4,5| –| 0:30| –| | | –| | 71| 0,2| 45| 27
| Rinse & Spin| –| –| 1400| 9,0| 6,0| –| | –| | –| –| –|
–| –| –
**| Spin & Drain *| –| –| 1400| 9,0| 6,0| –| **| –| –| –| –| –| –|
–| –
Required dosage Optional dosage
10| Eco 40-60 (4)
(Wash &Drying)
| 40 °C| 40 °C| 1351| 6,0| 6,0| 9:20| | | | | | 0|
3,80| 75| 33
1351| 3,0| 3,0| 5:10| | | | | | 0| 1,98| 47| 32
For wash programmes with temperatures above 50°C, we recommend using powder
detergent rather than liquid, and following the directions given on the
detergent package.
This data may differ in your home due to changing conditions in inlet water
temperature, water pressure etc. Approximate programme duration values refer
to the default setting of the programmes, without options. The values given
for programmes other than the Eco 40-60 programme are indicative only.
For all Test Institutes
1) Eco 40-60 (Wash) – Test wash cycle in compliance with EU Ecodesign
regulation 2019/2014. The most efficient programme in terms of energy and
water consumption for washing normally soiled cotton laundry.
4) Eco 40-60 (Wash &Drying)- Test wash&drying cycle in compliance with EU
Ecodesign regulation 2019/2014. To access “wash and dry” cycle select “Eco
40-60” wash programme and set “Drying” option level to “ ****”. The most
efficient programme in terms of energy and water consumption for washing and
drying normally soiled cotton laundry. At the end of cycle the garments can be
immediately stored to the cupboard.
Note: spin speed values shown on the display can slightly differs from
the values stated in the table.
For all testing institutes:
2) Long cotton cycle: set programme 5 at temperature 40°C.
3) Long synthetics cycle: set cycle 6 at a temperature of 40°C.
- By selecting the cycle and excluding the spin cycle, the washer-dryer will drain only.
** The duration of the programme is shown on the display.
* After programme end and spinning with maximum selectable spin speed, in default programme setting.
** The display will show the suggested spin speed as default value.
PRODUCT DESCRIPTION
- Worktop
- Detergent dispenser
- Control panel
- Door handle
- Door
- Water filter
- Adjustable feet (4)
DETERGENT DISPENSER
- Compartment 1: Do not insert detergent in this compartment.
- Compartment 2: Washing detergent (powder or liquid)
- Compartment 3: Additives (fabric softeners, etc.)
The fabric softener must not exceed the “MAX” level.
- Use powder detergent for white cotton garments, for pre-washing, and for washing at temperatures over 60°C.
- Follow the instructions given on the detergent packaging.
WASH CYCLES
Follow the instructions on the symbols of the garment’s wash care label. The value indicated in the symbol is the maximum recommended temperature for washing the garment.
Mixed Wash &Dry
use programme 1 to wash and dry mixed garments (cotton and synthetics). This
cycle may be used to wash and dry loads of up to 3,5 kg; we recommend the use
of liquid detergent.
The use of the steam in this programme is optimised to reduce the formation of
creases on garments, making them easier to iron.
Shirts and T-shirts
Use programme 2 to wash and dry shirts and T-shirts in different fabrics and
colours to ensure maximum care. This cycle may be used to wash and dry loads
of up to 2 kg. To achieve optimum results, use liquid detergent and pre-treat
cuffs, collars and stains. The use of the steam in this programme is optimised
to reduce the formation of creases on garments, making them easier to iron.
Pre Iron
Use this programme immediately before ironing; max. 2 kg load. The use of the
steam in this programme is optimised to reduce the formation of creases on
garments, making them easier to iron.
Steam Refresh
For refreshing garments, neutralised unpleasant odours and relaxing the fibres
by delivering steam into the drum. The garments will be damp at the end of the
cycle.
Cotton
Suitable for washing towels, underwear, table cloths, etc. made of resistant
linen and cotton that are moderately to heavily soiled.
Synthetics
Suitable for washing moderately soiled garments made of synthetic fibres (e.g.
polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton fibres.
Anti Stain Quick
this programme is ideal for washing the most difficult daily stains in 1 hour.
It is ideal for mixed fabrics and coloured garments, caring for your clothes
as it washes.
If the drying function is selected, a drying cycle automatically activates at
the end of the wash cycle that resembles open-air drying, with the added
advantages of preserving garments from yellowing due to sunlight exposure and
preventing loss of whiteness caused by the possible presence of dust in the
air. Dryness level “ **** ” recommended.
Anti Stain 40°
the programme is suitable to heavily-soiled garments with resistant colours.
It ensures a washing class that is higher than the standard class (A class).
When running the programme, do not mix garments of different colours. We
recommend the use of powder detergent. Pre-treatment with special additives is
recommended if there are obstinate stains.
If the drying function is selected, a drying cycle automatically activates at
the end of the wash cycle that resembles open-air drying, with the added
advantages of preserving garments from yellowing due to sunlight exposure and
preventing loss of whiteness caused by the possible presence of dust in the
air. Dryness level “ **** ” recommended.
White
For heavily soiled whites and resistant colours.
Eco 40-60
For washing normally soiled cotton garments declared to be washable at 40 °C
or 60 °C, together in the same cycle. This is the standard cotton programme
and the most efficient in terms of water and energy consumption.
20°C
For washing lightly soiled cotton garments, at a temperature of 20 °C.
Delicates
For washing very delicate garments. It is advisable to turn the garments
inside out before washing them. For best results, use liquid detergent on
delicate garments.
We recommend turning the garments inside out before washing and placing small
items into the special bag for washing delicates. Use liquid detergent on
delicate garments for best results.
When selecting an exclusively time-based drying function, a drying cycle is
performed at the end of the wash cycle that is particularly delicate, thanks
to light handling and appropriate temperature control of the water jet.
The recommended durations are:
- 1 kg of synthetic garments –> 150 min
- 1 kg of synthetic and cotton garments –> 180 min
- 1 kg of cotton garments –> 180 min
The degree of dryness depends on the load and fabric composition
Wool – Woolmark Apparel Care – Green:
the wool wash cycle of this machine has been approved by The Woolmark Company
for the washing of wool garments labelled as “hand wash” provided that the
products are washed according to the instructions on the garment label
and those issued by the manufacturer of this washer-dryer. (M1318
Rapid 30‘
For washing lightly soiled garments in a short time. Not suitable for wool,
silk and garments to be washed by hand.
Rinse & Spin
Designed for rinsing and spinning.
Spin & Drain
Designed for spinning and draining the water.
Door locked indicator
if the symbol is off the door is locked. To prevent any damage, wait
until the symbol turns on before opening the door.
To open the door while a cycle is in progress, press the START/PAUSE button ;
if the ****symbol is lit, the door can be opened.
FIRST-TIME USE
Once the appliance has been installed, and before it is used for the first time, run a wash cycle with detergent and no laundry, by setting the cycle 9(60°C).
DAILY USE
Prepare the laundry by following the suggestions appearing under the “TIPS AND SUGGESTIONS” section.
- Press the ON/OFF button ; the indicator light relative to START/PAUSE will flash slowly.
- Open the door. Load the laundry while making sure not to exceed the maximum load quantity indicated in the wash cycle table.
- Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments, as described in the “DETERGENT DISPENSER DRAWER” section.
- Close the door.
- The machine automatically displays the default temperature and spin speed values for the selected cycle, or the most recently used settings if they are compatible with the selected cycle.
- Select the desired wash cycle.
- Select the desired options.
STARTING CYCLE
Press the START/PAUSE button.
The machine will lock the door ( symbol OFF) and the drum will start to
rotate; the door will be unlocked ( symbol on) and then locked again (
symbol OFF) as preparation phase of each washing cycle. The “Clicking”
noise is part of the door locking mechanism. Water will enter the drum and
start the washing phase once the door is locked.
PAUSING A CYCLE
To pause the wash cycle, press the START/PAUSE button again; the indicator light will flash. If the symbol is lit, the door may be opened. To start the wash cycle from the point at which it was interrupted, press the START/PAUSE ****button again.
OPENING THE DOOR, IF NECESSARY
Once a cycle starts, the symbol turns off to signal that the door cannot
be opened. While a wash cycle is running, the door remains locked. To open the
door while a cycle is under way, for example, to add or remove garments, press
the START/PAUSE button to pause the cycle; the indicator light will flash.
If the symbol is lit, the door may be opened.
Press the START/PAUSE button again to continue the cycle.
CHANGING A RUNNING WASH CYCLE
To change a wash cycle while it is in progress, pause the washer-dryer using
the START/PAUSE button (the relative indicator light will flash), then
select the desired cycle and press the START/PAUSE button again.
! To cancel a cycle that has already begun, press and hold the ON/OFF ****
button. The cycle will be stopped and the machine will switch off.
AT THE END OF THE WASH CYCLE
This will be indicated by the word “END” on the display; when the symbol switches on, the door may be opened. Open the door, unload the laundry and switch off the machine. If you do not press “ON/OFF” button, the washing machine will switch off automatically after about a 10 minutes. Close the water tap, open the door and unload the washing machine. Leave the door ajar to allow the drum to dry.
OPTIONS
! If the selected option is incompatible with the programme set, the
incompatibility will be signalled by a buzzer and the corresponding indicator
light will flash.
! If the selected option is incompatible with another previously set option,
only the most recent selection will remain active.
Energy saver
This option saves energy by not heating the water used to wash your laundry –
an advantage both to the environment and to your energy bill.
Instead, intensified wash action and water optimisation ensure great wash
results in the same average time of a standard cycle.
For the best washing results we recommend the usage of a liquid detergent.
Start Delay
To set the selected programme to start at a later time, press the button to
set the desired delay time. The ****. symbol lights on the display when this
function is enabled. To cancel the delayed start, press the button again until
the value “0” is shown on the display.
Temperature
Each wash cycle has a pre-defined temperature. To modify the temperature,
press the “Temp.” button. The value will appear on the display.
Spin
Each wash cycle has a pre-defined spin speed. To modify the spin speed, press
the “Spin Speed” button. The value will appear on the display.
Setting the drying cycle
The first time the button “Drying Settings” is pressed, the machine will
automatically select the maximum drying cycle which is compatible with the
selected wash cycle. Subsequent presses will decrease the drying level and
then the drying time, until the cycle is excluded completely (“OFF”). Drying
may be set as follows:
- A- Based on the desired laundry dryness level: Cupboard : suitable for laundry which can be put back in a cupboard without being ironed. Hanger : ideal for clothes which do not need to be dried fully. Iron ****: suitable for clothes which will need ironing afterwards. the remaining dampness softens creases, making them easier to remove.
- B – Based on a set time period: between 210 and 30 minutes. If your laundry load to be washed and dried is much greater than the maximum stated load (see adjacent table of wash cycles), perform the wash cycle, and when the cycle is complete, divide the garments into groups and put some of them back in the drum. At this point, follow the instructions provided for a “Drying only” cycle. Repeat this procedure for the remainder of the load.
Note: a cooling-down period is always added to the end of each drying cycle.
Drying only
Press button “Dry only” to perform the drying-only cycle. After selecting the
desired cycle (compatible with the type of garments), press button “Dry only”
to exclude the washing phase and start the drying phase at the maximum level
for the selected cycle. The drying level or time may be set and changed by
pressing the drying button “Drying Settings”.
KEY LOCK
to lock the control panel, press and hold the button “Dry only” for approximately 3 seconds. the symbol lights on the display to indicate that the control panel is locked (with the exception of the button). This prevents unintentional changes to programmes, especially with children near the machine.
If any attempt is made to use the control panel, the symbol ****flashes on the display.
To unlock the control panel, press and hold the button “Dry only” for approximately 3 seconds.
TIPS AND SUGGESTIONS
Divide the laundry according to:
Type of fabric (cotton, mixed fibres, synthetics, wool, garments to be hand-
washed). Colour (separate coloured garments from whites, wash new coloured
garments separately). Delicates (small garments – such as nylon stockings –
and items with hooks – such as bras: insert them in a fabric bag).
Empty the pockets:
Objects such as coins or lighters can damage the washing machine and the drum.
Check all buttons.
Follow the dosage recommendation / additives
It optimizes the cleaning result, it avoids irritating residues of surplus
detergent in your laundry and it saves money by avoiding waste of surplus
detergent
Use low temperature and longer duration
The most efficient programmes in terms of energy consumption are generally
those that perform at lower temperatures and longer duration.
Observe the load sizes
Load your washing machine up to the capacity indicated in the “PROGRAMME
CHART” table to save water and energy.
Noise and remaining moisture content
They are influenced by the spinning speed: the higher the spinning speed in
the spinning phase, the higher the noise and the lower the remaining moisture
content.
CARE AND MAINTENANCE
Before performing cleaning and maintenance, switch the washing machine off and disconnect it from the mains power. Do not use flammable liquids to clean the washing machine. Clean and maintain your washer – dryer periodically (at least 4 times per year).
Disconnect the water and power supplies
Close the water tap after every wash. This will limit wear on the hydraulic
system inside the washing machine and help to prevent leaks.
Unplug the washing machine when cleaning it and during all maintenance work.
Clean the washing machine
The outer parts and rubber components of the appliance can be cleaned using a
soft cloth soaked in lukewarm soapy water. Do not use solvents or abrasives.
Clean the detergent dispenser drawer
Wash it under running water; this operation should be repeated frequently.
Care for the door and drum
Always leave the porthole door ajar in order to prevent unpleasant odours from
forming.
Cleaning the water filter / draining residual water
Switch off and unplug the washing machine, take out the kitchen plinth before
cleaning the water filter or draining residual water.
The kitchen plinth must be mounted back all the time once the cleaning
operation is over.
If you used a hot wash programme, wait until the water has cooled down before
draining any water. Clean the water filter regularly, to avoid that the water
cannot drain after the wash due to obstruction of the filter. If the water
cannot drain, the display indicates that the water filter may be clogged.
-
Place a container close to the pump to collect any spillage.
-
Remove, pulling it out, the “emergency drain hose” from the base of the washing machine .
Remove the stopper of the “emergency drain hose” at the end of the hose and let the water flow into the container.
-
Turn the exhaust filter handle and pull it out of the housing .
When the container of plinth is full with water, plug the stopper to the hose end, and reinsert the small hose in the washing machine’s base . After, empty the container .
Afterwards firmly close the emergency drain hose with the stopper . -
Remove filter: Lay a cotton cloth beneath the water filter, which can absorb a small amount of rest water . Then remove the water filter by turning it out anticlockwise .
-
Clean the water filter: remove residues in the filter and clean it under running water .
-
Insert the water filter: Reinsert the water filter again by turning it in clockwise direction . Make sure to turn it in as far as it goes; the filter handle must be in vertical position . To test water tightness of the water filter, you can pour about 1 liter of water into the detergent dispenser .
Then reinstall the kitchen plinth.
Check the water inlet hose
Check the water inlet hose at least once a year. If it is cracked or broken,
it must be replaced: during wash cycles, the high pressure of the water could
suddenly split the hose open.
! Never use hoses that have already been used.
LOAD BALANCING SYSTEM
Before every spin cycle, to avoid excessive vibrations before every spin and to distribute the load in a uniform manner, the drum rotates continuously at a speed which is slightly greater than the washing rotation speed. If, after several attempts, the load is not balanced correctly, the machine spins at a reduced spin speed. If the load is excessively unbalanced, the washing machine performs the distribution process instead of spinning. To encourage improved load distribution and balance, we recommend small and large garments are mixed in the load.
TRANSPORT AND HANDLING
TROUBLESHOOTING
Your washer-dryer could occasionally fail to work. Before contacting the Technical Assistance Service, make sure that the problem cannot be easily solved using the following list.
Anomalies | Possible causes / Solution |
---|---|
The washer-dryer does not start. | The appliance is not plugged into |
the socket fully, or not enough to make contact.
There is no power in the house.
The wash cycle does not start.| The washer-dryer door is not closed
properly.
The ON/OFF button has not been pressed.
The START/PAUSE button has not been pressed.
The water tap has not been opened.
A delay has been set for the start time.
The washer-dryer does not fill with water (“H2O” appears on the
display).| The water inlet hose is not connected to the tap.
The hose is bent.
The water tap has not been opened.
There is no water supply in the house.
The pressure is too low.
The START/PAUSE ****button has not been pressed.
The washer-dryer continuously loads and unloads water.
| The drain hose is not fitted between 65 and 100 cm from the floor.
The free end of the hose is immersed in water.
The wall drainage system is not fitted with a breather pipe.
If the problem persists even after these checks, turn off the water tap, switch the appliance off and contact the Technical Assistance Service. If the home is on one of the upper floors of a building, there may be problems relating to back-siphonage, causing the washer-dryer to fill with water and drain continuously. Special anti-siphon valves are available in shops and help to prevent this inconvenience.
The washer-dryer does not drain or spin.| The cycle does not include
drainage: with certain cycles it must be started manually.
The drain hose is bent.
The drainage duct is clogged.
The washer-dryer vibrates a lot during the spin cycle.| The drum
was not unlocked correctly during installation.
The washer-dryer is not level.
The washer-dryer is tucked between furniture cabinets and the wall.
The washer-dryer leaks.| The water inlet hose is not screwed on
properly.
The detergent dispenser drawer is obstructed.
The drain hose is not properly attached.
The START/PAUSE indicator light flash rapidly and an error code
appears on the display (e.g.: F-01, F-..).| Switch off the machine and
unplug it, wait for approximately 1 minute and then switch it back on again.
If the problem persists, contact the Technical Assistance Service.
There is too much foam.| The detergent is not suitable
for machine washing (it should display the text “for washer-dryers” or “hand
and machine wash”, or the like).
Too much detergent was used.
The washer-dryer does not dry.| The appliance is not plugged into
the socket, or not enough to make contact.
There has been a power failure.
The appliance door is not shut properly.
A Delay has been set.
DRYING is in the OFF position.
The machine can be heard taking in water
during the drying cycle.| It is normal for the machine to take in
short bursts of water during the drying cycle. This helps keep some internal
parts cool, and aids speed of drying.
DEMO MODE: to deactivate this function, switch the washer-dryer OFF. Than press and hold “Start/Pause” button, within 5 seconds press also “ON/OFF” button and hold both buttons for 2 seconds.
Policies, standard documentation, ordering of spare parts and additional
product information can be found by:
- Visiting the website http://docs.hotpoint.eu and parts selfservice.hotpoint.com
- Using the QR code.
- Alternatively, contact our Technical Assistance Service (the telephone number is indicated in the warranty booklet). When contacting the Technical Assistance Service, provide the codes shown on the adhesive label applied to the inside of the door.
For User’s Repair & Maintenance Information visit www.hotpoint.eu
The model information can be retrieved using the QR-Code reported in the
energy label. The label also includes the model identifier that can be used to
consult the portal of the registry at https://eprel.ec.europa.eu.
References
- Whirlpool Docs
- Hotpoint: Purchase Quality Home & Kitchen Appliances Online
- Hotpoint: Purchase Quality Home & Kitchen Appliances Online | HotPoint EU