Shenzhen Jbt Smart Lighting 9WA19RGB+CCT LED Bulb User Manual

Shenzhen Jbt Smart Lighting 9WA19RGB+CCT LED Bulb User Manual

Parameters

Name: LED Bulb
Model /HVIN: 9WA1 9RGB+CCT

Power Rated: 9W
Lamp Interface: E26
Luminous Flux: 800Im

Wi-Fi Standard: 2.LIGHz
Color Temperature: 2700K-6500K
Input Voltage: US/CA: AC 120V, 60Hz

FCC ID: 2AKG3-A1 9

Connection Process

1. Install the Teckin bulb
   

2. Access to power
   

3. Open Teckin App and choose the mode
   

4. Done
   

Select Mode

Get Teckin App

iOS

Android

Work with Alexa & Google Home

How to Set up

1. Download the “Teckin” App and create on account.
2. Connect the bulb to the power source.
3. Open the app and click “Add Device” on the front page. Click “NB50”.
4. Choose one connection method and follow the instructions on the app

EZ Mode

 Switch 3 times normally

 Bulb flashed  quickly

AP Mode

 Bulb flashed quickly

 Switch 3 times normally

 Bulb flashed slowly

Note

1. Beware of electricity while connecting.
2. AP/EZ mode will not show out if the switching speed is too fast.
3. 5GHz network is not supported, 2.40Hz only.
4. If you hove any problems connecting please contact customer service and we will reply bock to you within 7 hours.
5. Don’t put it in your mouth!

Warranty

1. 3D-day return policy & 2-year limited warranty.
2. Timely customer service via support@teckinhome.com
3. Lifetime professional tech support provided by Tec kr.

FCC Statement

This device complies with Port 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference thot may cause undesired operation.

“Please note that changes or modifications of this product is not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device. pursuant to Port 15 of the FCC Rules. These limits oredesigned to provide reasonable protection against harmful interference in residential installation.

when using this equipment can gnerate radiate radio frequency energy so if not installed and used in accordance with the instructions, wich may cause harmful interference to radio communicatians, but it not guarantees that interference will not occur in a particular installation.

However. there is no guorontee thot interference will not occur in o particular instollotion. If this equipment does couse hormful interference to radio or television reception. which con be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into on outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or on experienced radio/TV technician for help

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set pro, for an uncontrdled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IC Warning

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device moy not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>