PHILIPS HR3770 Flip&Juice Blender High Speed Blender with Juicer User Manual
- June 9, 2024
- Philips
Table of Contents
HR3770 Flip &Juice Blender High Speed Blender with Juicer
User Manual
https://philipskitchen-web.app.link/e/tDWlAByzlpb
HR3770 Flip&Juice Blender High Speed Blender with Juicer
Important
Read this user manual carefully before you use the appliance and save it for
future reference.
Warning
- Read the cleaning procedure from chapter “Cleaning” before use.
- Do not touch the sharp blades when the appliance is plugged in. If the blades get stuck, unplug the appliance before you remove the ingredients that block the blades. Be careful when handling the sharp cutting blades, emptying the blender jar and during cleaning.
- Switch off and unplug the appliance from the power supply before:
- Removing it from the stand, changing accessories or approaching parts that move in use.
- Assembling, disassembling or cleaning it.
- It is left unattended.
- Cleaning the appliance
- Do not immerse the appliance in water or any other liquid.
- Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance.
- Do not use the appliance if power cord, the plug, protecting cover, rotating sieve or any other parts is damaged or has visible cracks. If the mains cord is damaged, you must have it replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard.
- Make sure the lid is properly assembled to the blender jar before you use the appliance.
- This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
- This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
- Children should be supervised to ensure that they do not play with the appliance.
- Be careful if hot liquid is poured into the blender as it can be ejected out of the appliance due to a sudden steaming.
- Never assemble or disassemble the blender jar or the tumbler to the motor unit while the power is on.
- This appliance is intended for household use only.
- Do not operate the blender for more than 30 seconds without any ingredient. It may lead to overheating.
- Never let the appliance run unattended.
Caution
- In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
- Never use any accessories or parts from other manufacturers or that Philips does not specifically recommend. If you use such accessories or parts, your guarantee becomes invalid.
- Do not exceed the maximum capacity indication on the blender jar (Blending: 1.8 L / Juicing: 800 ml).
- Do not exceed the maximum quantities and processing times indicated in the relevant table.
- If food sticks to the wall of the blender jar, switch off the appliance and unplug it. Then use a spatula to remove the food from the wall.
- Never fill the blender jar with ingredients hotter than 80˚C.
- Noise level: Lc = 88 dB(A).
Blender
Warning
- Never reach into the blender jar with your fingers or an object while the appliance is running. Caution
- To prevent spillage, do not put liquid more than the maximum capacity of the blender jar. When you process hot liquid or ingredients that tend to foam, do not put more than 1.8 liters in the blender jar.
- Do not let the appliance run for more than 3 minutes at a time. Let the appliance cool down to room temperature before you continue processing.
- Always make sure the lid is properly closed/ assembled on the jar and the measuring cup is inserted properly in the lid before you switch on the appliance.
- Do not use jar right after taking it out from dishwasher or refrigerator. Let it stay at room temperature for at least 5 min before use.
Juicer
Caution
- If you detect cracks in the filter or if the filter is damaged in any way, do not use the appliance anymore and contact the Philips Consumer care centre for replacement.
- Make sure all parts are correctly assembled before you switch on the appliance.
- Remove the juicer module from motor unit after the appliance stops operating and the filter has stopped rotating.
Built-in safety lock
This feature ensures that you can only switch on the appliance if the blender
jar, the mill or the tumbler is assembled on the motor unit properly. If the
blender jar or the tumbler is correctly assembled, the built-in safety lock
will be unlocked.
Safety Feature
This blender is fitted with a safety feature which safeguards against
excessive loads. In case of overloading, the blender automatically activates
the protection and operation will stop and the overloading symbol E01 will
light up on the control panel. If this occurs, press and hold the rotary knob
for 2 seconds to power off the appliance, unplug it and allow it to cool down
for 15 minutes. Remove the ingredients and clear up the blender jar before
starting operation.
Electromagnetic fields (EMF)
This Philips appliance complies with all applicable standards and regulations
regarding exposure to electromagnetic fields.
Recycling
This symbol means that electrical products shall not be disposed of with
normal household waste. (Fig. 4) Follow your country’s rules for the separate
collection of electrical products.
Overview (Fig. 1)
-
Measuring cup
-
Lid of the blender jar
-
Blender jar
-
Rotary knob and quick select programs:
– Rotary knob:
Power on/off the appliance: press the rotary knob to power on, press and hold it for 2 seconds to power off the unit.
Wake up the appliance: press the rotary knob to wake up the appliance when it is in standby mode. (The appliance goes to standby mode when it is idle for three minutes.)
– Use a quick select program:
See ” Using quick select program” for details. -
Motor unit
-
Tumbler lid (Optional or HR3770/1x)
-
Tumbler seal ring (Optional or HR3770/1x)
-
Tumbler jar (Optional or HR3770/1x)
-
Seal ring (Optional or HR3770/1x)
-
Blade unit (Optional or HR3770/1x)
-
Blade unit holder (Optional or HR3770/1x)
-
Mill (Optional)
-
Spatula
-
Juicer funnel
-
Sieve
-
Sieve bracket
-
Juicer housing
Using quick select program
To use a quick select program:
You can turn the rotary knob to select the program you need and press the knob
to confirm your selection.
-Smoothie
-Ice crushing
-Sauce
-Dessert
-Nut-butter
-Soup
You can directly press the button below for:
– Clear juice button : juice fruit/vegetable with little fiber.
– Pulpy juice button : juice fruit/vegetable with fiber.
– Pulse button P : to blend briefly.
– Return button : press it to stop ongoing operation and return to selection
mode
To use manually :
Select a quick select program to operate the blender in manual mode and adjust
processing speed by rotating the knob.
You can adjust processing speed from speed 1 to speed 12 (maximum speed).
Before first time use
Before you use the appliance and accessories for the first time, thoroughly clean the parts that come into contact with food. (Fig. 7)
Important notes
Stop and unplug the appliance if there is a pungent smell or smoke. Let it
cool down for 15 minutes. Do not add excessive ingredients. Otherwise, the
ingredient mixture will become too thick or too heavy to process.
To avoid overloading the appliance, you can
- Add more liquid ingredient
- Process in several small batches
- Use a higher speed setting
Safety protection
The blender has a safety protection system. When Blender run over 3 minutes at
a time, it will stop process automatically. If you have not finished
processing after 3 minutes, switch off the appliance and let it cool down to
room temperature. Never use over 3 minutes consecutively.
When assembling the blender jar, make sure that the appliance is powered off
first.
Do not attempt to process very thick recipes such as bread dough or mash
potatoes.
Using your blender
Using the blender jar (Fig. 2)
To use a quick select program, turn the rotary knob to select the program you
need and press it to confirm your selection.
To pause ongoing processing, press the rotary knob to pause. You can press it
again to resume.
To stop ongoing processing and return to selection mode, press return button .
To process ingredients briefly (such as garlic), press and hold pulse button
P .
Note
- After three minutes, the blender will stop the process automatically.
- Do not blend dry ingredients (for example pepper corn or star anise).
Using the spatula (Fig. 3)
When the blender is switched on, use the spatula to enhance the smoothness and
consistency of result. When the blender is switched off, use the spatula to
remove the sticky ingredients on the jar.
Using the tumbler jar (Fig. 5)
Make your smoothies or shakes directly with the tumbler. Remove the blade unit
and attach the lid of the tumbler. Then you can bring the tumbler out and
enjoy directly.
Note
- Never overfill the tumbler jar above the maximum level indication to avoid spillage.
- Never fill the tumbler jar with carbonated drinks to avoid damage of the tumbler.
Using the juicer (Fig. 6)
You can use the juicer to juice up fruits and vegetables such as apples,
watermelon, pear, grapes, and pineapple.
To use the juicer, follow steps in Fig.6.
Clear juice (step 10 in Fig.6)
To get juice with little fiber, you can:
- Press Clear juice button .
- Press the rotary knob to start processing.
Pulpy juice (step 10 in Fig.6)
To get juice with fiber, you can:
-
Press Pulpy juice button .
-
Rotate the rotary knob to select a processing program.
• P1: for soft and juicy fruits to make pulpy juice with fibers in it.
• P2: for both juicy and non juicy fruits to make juice from mixed fruits.
• P3: for juicy and non juicy fruits and vegetables to make juice with lots of fibers from mixed fruits and vegetables. -
Press the rotary knob to start processing.
Tips:
To pause ongoing processing, press the rotary knob.
You can press it again to resume.
To stop ongoing processing and return to selection mode, press the return
button .
Caution
- If you exceed the recommended max ingredient level for Blend & Juice, the juicer funnel may become blocked. When this occurs, switch off the appliance, turn over to jar stand mode, remove excess ingredient and restart the Blend & Juice preset again.
- Some ingredients may not have enough juice for effective juicing (eg. Carrot, apples, vegetables). It is recommended to add suitable amount of water/ice for best result.
Cleaning (Fig. 7)
Caution
- Before you clean the appliance, unplug it.
- The cutting edges are sharp. Be careful when you clean the blade unit.
- Make sure that the cutting edges of the blade do not come into contact with hard objects. This may cause the blade to get blunt.
Clean the motor unit with a moist cloth.
Clean the other parts in water (< 60 °C) with some washing-up liquid or in a
dishwasher.
Easy clean
Follow the steps in Fig. 7.
Note
- Please use the quick clean function for easy clean. Add some dish soap and water to blender jar and activate quick cleaning function.
Warranty and support
Philips offers a 2-year warranty on this product after purchase. This warranty is not valid if a defect is due to incorrect use or poor maintenance. More information is available online, please visit our website www.philips.com/support.
© 2022 Philips Domestic Appliances Holding B.V.
All rights reserved.
3000.089.0490.2 (1/2) (28/10/2022)
References
- Philips Customer Service Support - Home | Philips
- BMUV: Bundesministerium für Umwelt, Naturschutz, nukleare Sicherheit und Verbraucherschutz