ipega PG-P5V001 P5 VR 2 Stand Dual Charge User Manual
- June 9, 2024
- ipega
Table of Contents
ipega PG-P5V001 P5 VR 2 Stand Dual Charge User Manual
Product Illustration
Product Description :
- This product can be used for storage of VR headset, VR controller and headset.
- Charge for 2 PS VR2 controllers simultaneously.
- Magnetic charging, convenient and fast.
- With 1 USD data expansion port.
- Dazzling RGB light effect.
Specifications:
- Voltage : DC 5V
- Working current : ≤2.3A
- Charging current : <700 mA*2
- Charging hours: ~1.5 hours
Assembly Instructions:
Step-By-Step Assembly Instructions
Product instructions:
-
Once the product is assembled, place the VR headset on the hanger, install the VR controllers into the magnetic charging adapter and place them in the charging port.
-
Using the USB cable to connect the product and console. Once power on, the charging indicator light turns blue. The indicator light turns orange during charging, and turns blue when fully charged. The charging switch at the back of the base can turn on or off the charging circuit (including the charging indicator light, but it does not affect the light bar) Once finished charging, you can turn off the changing function of the product.
-
The light bar has 10 lighting effects which controlled by the light effect switch button. The default light effect of the light bar: Gradient 1. Gradient, 2. Flashing, 3. Red, 4. Green, 5. Blue, 6. Yellow, 7. Cyan, 8. Purple, 9.White, 10. Off. (Flash definition: red, green, blue, yellow, blue, purple, white, one color switched every second)
When the power is off, the current lighting effect will be saved
Lighting effect switch:
Control the switching and turning on and off of the lighting effect; Short press the light effect switch and release it to change the light effect; Press and hold the switch for 3 seconds to turn off and save the current light effect, and short press the switch again to turn on the saved light effect; -
There is an USB2.0 port on the base that only has the data transmission function (connect to the P5 console active the function), and it is not allow to use as a charging port.
Note :
- Please do not store this product in wet or high-temperature areas.
- Don’t knap, beat, drub, pierce, or try to decompose this product, to avoid unnecessary damage to the product.
- Please keep away the fire or heating area while charging the controller
- Non professional personnel should not disassemble the product, otherwise it will not be covered in the after-sales warranty service.