xtorm XE105 Power Bank Instruction Manual

: June 9, 2024
: Xtorm

Table of Contents

SPECIFICATIONS
CHARGING YOUR DEVICE
RECHARGING THE POWER BANK
LED POWER INDICATOR
IN THE BOX
Documents / Resources

XE105 Power Bank
Instruction Manual

SPECIFICATIONS

| 5000 mAh Li-ion / 18.5Wh
---|---
| 1x USB-C 12W (5V-2.4A)
1x USB-A 12W (5V-2.4A)
| 120x63x14 mm
| 135 grams
| 1x USB to USB-C cable 1x Manual

xtorm XE105 Power Bank - 1

In/Output
USB-C 12W
USB 12W
Power Button
LED Power Indicator
Official Xtorm Label

CHARGING YOUR DEVICE

xtorm XE105 Power Bank - 2

3A Connect the USB end of the charging cable to the USB-A output of the Power Bank and the other end to the input of your device. The charging will start automatically.
3B Charging some devices requires a charging cable other than the one supplied. E.g. an Apple Lightning® or a Micro USB cable.

RECHARGING THE POWER BANK

xtorm XE105 Power Bank - 3

4A Connect the USB-C end of the charging cable to output 1 of the Power Bank and the USB end to a wall charger.
4B For the fastest charging possible use a 12W charger. This will fully recharge the Power Bank within 2.5 hours.

LED POWER INDICATOR

xtorm XE105 Power Bank - 4

5A Press the Power Button once to display the battery level remaining in the Power Bank via the LED display.
5B Each lit LED light indicates 25% remaining energy in the Power Bank. At 4 lit lights, the Power Bank is fully charged.

IN THE BOX

XE105 Essential Power Bank
USB to USB-C cable
Manual

RECYCLING

When recycling this product, please follow WEEE battery recycling procedures. Contact your local recycling organization for more information.
XTORM SAFETY CHECK

TEMPERATURE CONTROL
Provided with a temperature control chip that prevents overheating.
OVERLOAD PROTECTION
Protects both the internal battery as well as the battery of the attached device from overcharging.
SECURED POWER MANAGEMENT
Automatically picks the correct charging speed and efficiently devides power between attached devices.
SHORT CIRCUIT PROTECTION
Breaks the circuit automatically when an overcurrent is detected. This protects the Xtorm chargerand your device from short circuit damage.
A-CLASS BATTERY CELLS
We only use the best battery cells that provide the fast charging you need and meet all safety requirements.
HIGH EFFICIENCY
Our power products are built to power your device as efficient as possible. This en- sures the least possible loss of energy during the charging process.

Warnings
Don’t drop, dissemble or attempt to repair the charger by yourself.
Avoid exposure to water or high humidity. Don’t expose to any heat source. Keep out of reach of children. Don’t use in the presence of flammable gas. The warranty will lapse in the event of improper use. Telco Accessories has tested the product in a test environment.
All statements/declarations made by Telco Accessories about the (operation) of the product are based on the results obtained from such tests. These esults/statements/declarations cannot be guaranteed, for example in cases of deviating or injudicious use and/or use in a different environment.

EU DECLARATION OF CONFORMITY
(In accordance with EN ISO/IEC 17050-1)

Declaration number:	DOCIP 2010877
Name and address of manufacturer / EU-AR:	Telco Accessories Group Hoofdveste

19 3992 DH Houten Netherlands

THIS DECLARATION OF CONFORMITY IS ISSUED UNDER THE SOLE RESPONSIBILITY OF:

Name and address of manufacturer:| Telco Accessories Group Hoofdveste 19 3992 DH Houten Netherlands
---|---
Product identification:| XE1050
XE1051
XE1100
XE1101
XE1200
XE1201| Essential Powerbank 5.000
Essential Powerbank 5.000
Essential Powerbank 10.000
Essential Powerbank 10.000
Essential Powerbank 20.000
Essential Powerbank 20.000

THE PRODUCTS MENTIONED IN THIS DECLARATION ARE IN CONFORMITY WITH:
EU Community Legislation
Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU PHU L174/88-110, 01.07.2011)
Electromagnetic Compatibility (EMC) Directive 2014/30/EU [OJEU L96/79-106, 29.03.2014)
Harmonised standards
Electromagnetic Compatibility (EMC)
EN 55032:2015 + AC:2016 + A11:2020 + A1:2020
EN 55035:2017 + AC:2019-11 + A11:2020
Safety of electrical equipment (LVD)
EN IEC 62368-1:2020/A11:2020
Restricted substances in electrical products
EN IEC 63000:2018
SIGNED FOR AND ON BEHALF OF: