Weetla 03A Magnetic Wireless Power Bank User Manual
- June 9, 2024
- weetla
Table of Contents
03A Magnetic Wireless Power Bank
User Manual
weetla 03A
Magnetic Wireless Power Bank
Packing Details
Packing Details
- Magnetic wireless power bank * 1
- Type-C charging cable * 1
- Manual * 1
Power Indicators
1. Power input (recharge for pow bank):
a. Use charging cable provided in the package to recharge power bank b. The
“power charging indicators 100%” will flash from 0-100%
- Note: Please use OC or PO power adapter with an output power of at least 12W to charge the power bank
2. Power output (power bank charge for ‘Phone 12/13/14 series): a. Charging with Type-C to Lighting cable: the °power charging indicators 100%” is on
b. Wireless charging:
(1): One click the “power control button” to turn on the power bank (while double click is to turn off);
(2): Both “wireless charging indicator” and “power charging indicators 100%” are on;
(3): Align the charging area between phone and power bank
None : Only works for Phone 12/13/14 series with or without magnetic case
Whithin 4mm Thickkness Phone Case Poccerrranded
Using
1. Work as magnetic suction wireless power bank, support iPhone 12/13/14
series with or without magnetic case
NOTE: If charging with case, the case must be magnetic case)
2. Work as wilreSS charger put on desk for convenient charging
Notes: wireless charging function
-
Put the phone on the wireless charger, one click the “power control button” to turn on the wireless charging function
-
Supports charging the phone with 5W power while wireless charging
-
Maanetic and metal accessories (such as cards keys and handles ring)vill interfere with wireless charging during use
-
The wireless charging function is turned off when the power bank uses the TYPE-C port to charge the phone
3C DIGITAL ORIGINAL DESIGN
Features- 5W magnetic wireless quick charging
- 10000mAh+wireless+magnetic suction 3 in 1
- 5V/2.4A quick charging
- With both input and output for portable charging
- Accurate LED power indicators
- High quality safe polymer battery
Specifications
Name: Magnetic Wireless Power Bank
Model: 03A
Type-C Input: DC5V.2.4A
Rated Capacity: 6000mAh(5Vm2A)
Capacity: 10000mAh 38.5WH
Working Temperature: -10-40t
Executive Standard: GB/T35590-2017
Type-C Output: DC5V=2
Wireless Output: 5W
Product Weight: 200g
Product Size: 106.67*20mm
FCC Warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation Is subject to the following two conditions:
(1)This device may not cause harmful interference (2) this device must accept
anyinterference received. Incluarlu interference that may cause undesired
operation.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Notes and Warnings
- If this device is not used for a long time please charge it at least every 3 months
- It might produce slight heat during charging which is normal as long as it’s under 55`C
- Always keep this device dry and do not clean it with chemical agents
- Go green with XIPIN and recycle this device at desianated place
- Children must use it under the guidance of adults
- Do not crash, disassemble, impale or put this device into humid conditions or fire
- Do not use it to charge devices with incompatible current and voltage which may cause fire or other problems
FAQ
When it’s not charging for this device.****
– Please check the charging cable or adapter if they are working. If not. please choose compatible components to charge it
When It’s charging for the phone.****
– Please make sure the power is on and the power bank has enough power. If above still doesn’t work. please go contact us for assistance
After-sales Services
If there is any issue with the item, please contact us through the Amazon
Message Center or through the E-mail:
[email protected]
In order to solve the problem faster for you, please prepare the following
information: the issue of power bank, phone model, the type of adapter and
phone case you are using. and if possible you can attach a picture or video of
the problem.
Manufacturer:
SHENZHEN XPADSP TECHNOLOGY CO.,LTD.
Address: Rm. 403, Building CS, Zhigu, No. 6, Xlawei Ind. Zone 1st Rd.
ZhangkengIing Community, Guanhu St.
Longhua Dist., Shenzhen
Phone number: +1 209-718-4733
Mail: [email protected]
Website: www.weetia.com
|
---|---
www.weetla.com|
[email protected]
FCC statement:
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions: 1) this device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radiation Exposure Statement This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co- located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 0 cm surrounding the device and 0 cm above the top surface of thedevicemust be respected.