Weetla M1 Wireless Car Charger Mount User Manual
- June 16, 2024
- weetla
Table of Contents
**Weetla M1 Wireless Car Charger Mount
**
Product Introduction
- Left arm clamp
- Right arm clamp
- Bottom bracket arm clamp
- Wireless charging coil /Coil indicator light
- Automatic telescopic arm clamp
- Button/Indicators
- TypeC charging port
- Air outlet clip
Product Parameters
Model: M1
Input: 5V 2A or 9V 2A
Output: 5W/7.5W/10W/15W
Wireless charging efficiency: 70%-80%
Operation temperature: -10°C-40°C
FCC ID: 2AXTH-M1
Brand: Weetla
Input socket: Type-C
Applicable mobile phone: 4.0-6.9in
Charging distance: ≤0.157in(4mm)
Product dimensions: 3.072.954.2in
Weight: 9.6 ounces
Product Features
- This product has a power storage function, and the arm clipcan still be opened and closed twice after the flame is turned off, so as to prevent the embarrassment that the arm clipcan not be opened after the flame is turned off.
- This product is designed with corrugated non-slip siliconepad, which can effectively avoid mobile phone buttons.
- This product adopts a U-shaped arm radian, and the mobilephone screen will not slide out if it is placed down.
- This product has circulation cooling holes to protect the phone from heating while charging.
- The biggest feature is that this product has a movable coil design, whether it is a large mobile phone (iPhone 14 Pro Max) or a small mobile phone (iPhone 12Mini), or even a folding mobile phone (Samsung Z-FILP Flip), it can be found optimal charging position and fast charging.
Lighting Mode
| Mode | Indicator light |
|---|---|
| Power ups | The coil indicato rlight is always on blue light/after 5 seconds |
the button light is on white light
Standby| Button white light is always on
Charging| Button white light breathing
Full| Button white light is always on
Foreign body detected| The button white light keeps flashing
Over temperature protection status| The button white light flashes quickly for
5s and goes out
Operation Steps
-
Install the Vent Clips
-
Horizontal air vents
-
Vertical air vents
-
Please note, the base of the car air vent clip needs to be supported on the car panel.
Compatible Phone Model
For iPhone: iPhone 14, iPhone 14 Pro, iPhone 14 Pro Max, iPhone 14 Plus,
iPhone 13, iPhone 13 Pro, iPhone 13 Pro Max, iPhone 13 Mini, iPhone 12, iPhone
12 Pro, iPhone 12 Pro Max, iPhone 12 Mini, iPhone 11,
iPhone 11 Pro, iPhone 11 Pro Max, iPhone XS, iPhone XS MAX,
iPhone X, iPhone XR, iPhone 8, iPhone 8 Plus
For Samsung: S23 Ultra, S22 Ultra, S22+, S22, S21 Ultra 5G, S21+, S21,
S21 FE, S20, S10, S9, S9+, S8, S8+, S7, S7 Edge, S6 Edge Plus, Note 10 10+,
Note 9, Note 8, Note 7, Note 5
For Google: Pixel 7, Pixel 7 Pro, Pixel 6 Pro, Pixel 6, Pixel 5
Product Cautions
- Avoid dropping the product from high places.
- Do not disassemble charger without authorization.
- Please do not put the metal or magnetic goods(such as coin, bank card, key etc)on the charging area while charging, whichmay cause damage or abnormality to the charger.
- Please keep the charger away from water or other liquid.
- If the charger overheats and stops charging during use, please remove the charging devices and try charging after cooling down.
- Please do not use the product in high temperature, humidityand corrosive environment.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must acceptany interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is device.
- Consult the dealer or an experienced radio/TV technician for help
After-sales Services
If there is any issue with the item, please contact us through the Amazon Message Center or through the E-mail: support@weetla.com
In order to solve the problem faster for you, please prepare the following information: the issue of charger, phone model, the type of adapter and phone case you are using, and if possible you can attach a picture or video of the problem. Thank you.
Packaging List
- Wireless Car Charger *1
- Air Vent Clip *1
- 47.2in Type-C Cable *1
- User Manual *1
Tel: +1 209-718-4733
Email: support@weetla.com
Website: www.weetla.com
Product usage video
Made in China
Documents / Resources
|
Weetla M1 Wireless Car Charger
Mount
[pdf] User Manual
M1 Wireless Car Charger Mount, M1, Wireless Car Charger Mount, Car Charger
Mount, Charger Mount, Mount
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>