VORDON VRC-410 Rear View Camera User Manual
- June 9, 2024
- VORDON
Table of Contents
VORDON VRC-410 Rear View Camera
User manual
Device installation
The connection diagram of the device is presented in the picture above. The
camera is equipped with a standard power harness, but due to the complexity of
the installation and the possibility of damage to the equipment due to
incorrect installation, we recommend that the car camera is connected by
qualified personnel.
The camera is powered directly by the reversing lights, check the reversing
light with the meter, then connect the red camera wire to it, the black cable
connect to ground. The monitor is directly powered from the cigarette lighter.
The display can be turned on or off with the red button on the cigarette
lighter plug.
Electrical and electronic devices as well as batteries and accumulators must not be mixed with other household waste. This is indicated by the symbol of the crossed out basket on the packaging. Worn-out electric and electronic equipment as well as batteries and accumulators should be delivered to local separate waste collection points or to the seller, and for details inquire in your commune. Electrical and electronic equipment as well as batteries and accumulators may contain hazardous substances, mixtures and components harmful to the environment and human health. Improper handling or damage to them may lead to health damage or environmental pollution during further disposal or recycling of the equipment.
www.vordon.pl/do-pobrania
Importer:
ArmareS.A.
ul Grzybowska 87 I 00-8441 Warszawa I Polska
Designed by Verdon in Europe,
produced in China