VORDON 910 Car Stereo Display User Manual
- June 9, 2024
- VORDON
Table of Contents
User Manual
Connection diagram —————————————-
| 1 | GND | 2 | BATT |
|---|---|---|---|
| 3 | ACC | 4 | ILL |
| 5 | BACK | 6 | KEY2 |
| 7 | KEY1 | 8 | ANT |
| 9 | FR- | 10 | RL- |
| 11 | FR+ | 12 | RL+ |
| 13 | FL – | 14 | RR+ |
| 15 | FL+ | 16 | RR- |
GPS : GPS Antenna
ANT : Radio Antenna
Table
| A | LINE OUT SUBWOOFER (green): subwoofer output |
|---|
RCA OUT FL(white): front left speaker output
RCA OUT FR(red): front right speaker output
AUX IN R(red): auxiliary right speaker input
AUX IN L(white): auxiliary left speaker input
VIDEO OUT (yellow)
CVBS-IN-1: video input (yellow)
FCAM: front camera input (yellow)
AMP-CON: amplifier control(black)
MIC IN (black): Extraposition microphone input jack
B| Transfer wire(black) for front AHD camera
| Transfer wire(yellow) for rear AHD camera
| Reverse detect wire(red)
C| No function
D| USB 1
E| USB 2
F| WiFi Antenna (gray)
Bluetooth Antenna (white)
CAMERA(yellow): rear camera input
User Interface —————————–
1. Device installation
The car radio connection diagram is presented on the first page of this manual. The radio is equipped with a standard ISO connector, but due to the individual cable routing in various car models and the level of installation complexity, we recommend that the car radio is connected by qualified personnel.
2. Starting and shutting down the device
To start the device, press the “power” button when the ignition is on.
To turn off the device, press the button again for at least 2 seconds
3. The main interface of the device
After turning on the radio, the main interface of the device will start automatically. Click on the menu icon to enter the main menu with functionalities. Press and hold an application icon and then drag it to change its position.
After entering the radio function, press the back button to return to the previous screen or the menu icon to go to the menu.
When you press the application icon in the background, you will see recently opened applications and those running in the background
In the main menu, press the application icon (3) to access the preview of all installed applications
4. Main functionality
- GPS Navigation – press to enter navigation mode (the default is the navigation application). Make sure the GPS module is properly connected before use.
- Music – press to open the music player interface. All music files from external media will also be visible here
- Application menu – press to browse installed applications
- FM radio – press to enter classic radio menu
- Reversing camera interface – a place where the rear view camera image with basic functionalities, such as a photo, will be displayed.
- Music – quick control panel for music files played on the car radio
- Calendar – the basic date and time interface
- Menu bar – a bar with basic function buttons and buttons for quick access to functions.
5. Precautions
- Read the instructions for electrical connection carefully. If it is done incorrectly, the car stereo will be damaged.
- If possible, installation of the car stereo should be performed by a specialist.
- Do not subject the device to physical impact.
- Insulate any exposed cables to avoid a short circuit
- After installation is complete, fix any loose cables.
- The car stereo is designed to operate with a negative ground connection. Check that the car is equipped with this type of electrical system.
- Connect the car stereo according to the connection diagram, otherwise it will not function properly and may be damaged.
- Be sure to connect the speakers correctly, otherwise you may damage both the speakers and the amplifier.
- Avoid contact of the device with sources of electromagnetic radiation.
Importer:
Armare S.A.
ul Grzybowska 87, Warszawa, Polska
Designed by Vordon in Europe,
produced in China
Electrical and electronic devices as well as batteries and accumulators must not be mixed with other household waste. This is indicated by the symbol of the crossed out basket on the packaging. Worn-out electric and electronic equipment as well as batteries and accumulators should be delivered to local separate waste collection points or to the seller, and for details inquire in your commune. Electrical and electronic equipment as well as batteries and accumulators may contain hazardous substances, mixtures and components harmful to the environment and human health. Improper handling or damage to them may lead to health damage or environmental pollution during further disposal or recycling of the equipment.
Armare S.A. hereby declares that the Vordon device complies with the European
Directive RE 2014/53 / EU. The full text of the Declaration of Conformity is
available at the following internet address:
www.vordon.pl/declarations