PHILIPS TAB7207 7000 Series Wireless Soundbar User Manual

PHILIPS TAB7207 7000 Series Wireless Soundbar

Register your product and get support at
www.philips.com/support

Important safety instructions

Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply.

Safety
Risk of electric shock or fire!

• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.
• Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Consumer Care to have the product checked before use.
• Never place the product and accessories near naked flames or other heat sources, including direct sunlight.
• Never insert objects into the ventilation slots or other openings on the product.
• Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
• Battery (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
• Disconnect the product from the power outlet before lightning storms.
• When you disconnect the power cord, always pull the plug, never the cable.
• Use the product in tropical and/or moderate climates.

Risk of short circuit or fire!

• For identification and supply ratings, see the type plate at the back or bottom of the product.
• Before you connect the product to the power outlet, ensure that the power voltage matches the value printed on the back or bottom of the product. Never connect the product to the power outlet if the voltage is different.

Risk of injury or damage to this product!

• For wall mounting, this product must be securely attached to the wall in accordance with the installation instructions. Use only the supplied wall mount bracket (if available). Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country.
• Never place the product or any objects on power cords or on other electrical equipment.
• If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet.
• Parts of this product can be made of glass. Handle with care to avoid injury and damage.
• Please use the product safely in an environment with temperature between 0°C and 40°C.

Risk of overheating!

• Never install this product in a confined space. Always leave a space of at least four inches around the product for ventilation. Ensure curtains or other objects never cover the ventilation slots on the product.

Risk of contamination!

• Do not mix batteries (old and new or carbon and alkaline, etc.).
• CAUTION: Danger of explosion if batteries are incorrectly replaced. Replace only with the same or equivalent type.
• Remove batteries if they are exhausted or if the remote control is not to be used for a long time.
• Batteries contain chemical substances, they should be disposed of properly.

This is CLASS II apparatus with double insulation, and no protective earth provided.
AC voltage
Follow the instructions in the user manual!

WARNING!
Warning: Risk of electric shock!

The exclamatory mark is intended to alert the user to the presence of important operating instructions.

Note

• The rating label is pasted on the bottom or back of the equipment.

Care for your product

Use only microfiber cloth to clean the product.

Care of the environment
Disposal of your old product and battery

Your product is designed and manufactured with high-quality materials and components, which can be recycled and reused.

This symbol on a product means that the product is covered by European Directive 2012/19/EU.

This symbol means that the product contains batteries covered by European Directive 2013/56/EU which cannot be disposed of with normal household waste.

Inform yourself about the local separate collection system for electrical and electronic products and batteries. Follow local rules and never dispose of the product and batteries with normal household waste. Correct disposal of old products and batteries helps prevent negative consequences for the environment and human health.
Removing the disposable batteries To remove the disposable batteries, see battery installation section.

Declaration of conformity
This product complies with the radio interference requirements of the European community.
Hereby, MMD Hong Kong Holding Limited declares that the product is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and UK Radio Equipment Regulations SI 2017 No 1206. You can nd the Declaration of Conformity on www.philips.com/support.

Help and support
For extensive online support, visit www.philips.com/support to:

• download the user manual and the quick start guide
• watch video tutorials (available only for selected models)
• find answers to frequently answered questions (FAQs)
• email us a question
• chat with our support representative. Follow the instructions on the website to select your language, and then enter your product model number.
  Alternatively, you can contact Consumer Care in your country. Before you contact, note down the model number and serial number of your product. You can find this information on the back or bottom of your product.

FCC information

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

FCC &IC Warning:

• This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
• Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC-Canada: CAN ICAN ICES-003(B) / NMB-003(B)
This device contains license-exempt transmitter(s) / receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Your soundbar

Congratulations on your purchase, and welcome to Philips! To fully benefitt from the support that Philips offers, register your soundbar at www.philips.com/support.

What’s in the box

Check and identify the items in the package:

• Soundbar                                      x 1
• Wireless subwoofer                      x 1
• Remote control                            x 1
• Power cord (subwoofer)              x 1
• Power cord (soundbar)
• Wall mount kit                              x 1
• Quick start guide                           x 1
• Warranty card                                x 1
• Safety sheet                                    x 1
• Wall mount template                      x 1

• Power cord quantity and plug type vary by regions.
• Images, illustrations and drawings shown on this User Manual are for reference only, actual product may vary in appearance.

Main unit

This section includes an overview of the main unit.

1. +/- (Volume) button Increase or decrease volume.

2. button

3. Press to select the Bluetooth mode.

4. Press and hold to disconnect all devices and enter the Bluetooth pairing mode.

5. (Source)
   Select an input source for the soundbar. Default source is HDMI ARC.

6. (Standby-On) button
   Switch the soundbar On or to standby.

7. Soundbar’s LED indicator
   Switch the playback source and the front indicator lights up accordingly.
   The indicator light on the front of the main unit will show which mode is currently in use.Status| LED state
   ---|---
   AUX| [AUX/USB] Solid white
   USB| [AUX/USB] Blinking white
   Standby| [Standby] Solid red
   BT(Bluetooth)

• Connected

• Connection

| [BT] Solid white [BT] Blinking white
OPTICAL| [OPT] Solid white
HDMI ARC| [HDMI ARC] Solid white
6. Remote control sensor

Connectors
This section includes an overview of the connectors available on your soundbar.

1. Audio in
   Audio input from, for example, an MP3 player (3.5mm jack).

2. USB

   • Connect to a USB storage device for audio media play.
   • Upgrade software of this product.

3. HDMI out (ARC)
   Connect to the HDMI (ARC) input on the TV.

4. Optical in
   Connect to an optical audio output on the TV or a digital device.

5. AC in
   Connect to the power supply.

6. Wall bracket slot.

Wireless subwoofer
This section includes an overview of the wireless subwoofer.

1. AC in
   Connect to the power supply.

2. Pair button
   Press and hold to enter the pairing mode for the subwoofer.

3. Subwoofer indicator Determine the status based on the wireless subwoofer indicator.

Remote control

This section includes an overview of the remote control.

1. (Standby-On) button

2. Switch the soundbar On or to standby.

3. EQ (Mode)
   Select from the four EQ modes: Movie/Music/Voice/Stadium.

4. HDMI ARC
   Switch your source to HDMI ARC connection.

5. Pair / BT
   Short press to switch to Bluetooth source. The soundbar will reconnect to the last paired device if it’s available. Press and hold for 3 seconds to disconnect from all Bluetooth devices and enter pairing mode.

6. (Previous / Next)
   Skip to the previous or next track in USB/ BT mode.
   (Play / Pause)
   Start, pause or resume play in USB/ BT mode.
   VOL+ / VOL- (System volume) Increase /decrease system volume level.

7. Optical
   Switch your audio source to the optical connection.

8. AUX/USB :
   Switch your audio source to the AUX/USB connection.

9. – TREBLE
   Decrease the soundbar’s treble volume.

10. +TREBLE
    Increase the soundbar’s treble volume.

11. -BASS
    Decrease the subwoofer’s volume.

12. +BASS
    Increase the subwoofer’s volume.

Prepare the remote control

• The provided remote control allows the unit to be operated from a distance.
• Even if the remote control is operated within the effective range 19.7 feet (6m), remote control operation may be impossible if there are any obstacles between the unit and the remote control.
• If the remote control is operated near other products which generate infrared rays, or if other remote control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely, the other products may operate incorrectly.

Replace the remote control battery
Slide to remove the battery compartment cover, insert 2 AAA batteries (1.5V) with correct polarity, then slide the battery compartment cover back into position.

• Make sure the (+) and (–) ends of the batteries match the (+) and (–) ends indicated in the battery compartment.

Precautions concerning batteries

• Be sure to insert the batteries with correct positive “ + ” and negative “ – ” polarities.
• Use batteries of the same type. Never use different types of batteries together.
• Either rechargeable or non-rechargeable batteries can be used. Refer to the precautions on their labels.
• Be aware of your fingernails when removing the battery cover and the battery.
• Do not drop the remote control.
• Do not allow anything to impact the remote control.
• Do not spill water or any liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of excessive heat.
• Remove the battery from the remote control when not in use for a long period of time, as corrosion or battery leakage may occur and result in physical injury, and/or property damage, and/or fire.
• Do not use any batteries other than those specified
• Do not mix new batteries with old ones.
• Never recharge a battery unless it is confirmed to be a rechargeable type.

Placement
Place the subwoofer at least 1 meter (3 feet) away from your soundbar, and 10 centimeters away from the wall.
For best results, place your subwoofer as shown below.

Wall mount

Note

• Improper wall mounting may result in accident, injury or damage. If you have any query, contact Consumer Care in your country.
• Before wall mounting, make sure the wall can support the weight of your soundbar.
• Before wall mounting, you need not remove the rubber feet at the bottom of the soundbar, otherwise the rubber feet cannot be fixed back.
• Depending on the type of wall mounting, make sure that you use screws of a suitable length and diameter.
• Please check whether the USB port on the back of the soundbar is connected to a USB device. If it is found that the connected USB device affects the wall-mount, you need to use another USB device of the appropriate size.

Screw length/diameter

Suggested wall mounting height You are recommended to install the TV first before wall mounting the soundbar. With a TV preinstalled, wall mount the soundbar 50mm/2.0’’ in distance from the bottom of the TV.

WARNING !

• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
• Suggested wall mounting height:≤ 1.5 meters.

1. Drill 2 parallel holes (diameter 3-8mm each according to wall type) on the wall.
   • The distance between the holes are: 731mm / 28.78”
   • You can use the wall mount template provided for helping the drilling holes position on the wall.
2. Secure the dowels and screws in the holes.
   • Be sure to leave a 1.8-2.3mm gap between the wall and the screw’s head.
3. Attach the wall brackets (x2) into the back of the unit.
4. Hang the soundbar on the fastening screws.

Connect

This section helps you connect your soundbar to a TV and other devices, and then set it up.
For information about the basic connections of your soundbar and accessories, see the quick start guide.

Note

• For identification and supply ratings, see the type plate at the back or bottom of the product.
• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.

Dolby Audio-Dolby Digital Plus
Dolby Audio-Dolby Digital Plus gives you a new surround listening experience. For more information, please visit dolby.com

Use Dolby Audio-Dolby Digital Plus
Dolby Audio-Dolby Digital Plus is available in HDMI-ARC mode. For the details of the connection, please refer to “Connect to HDMI ARC”.

1. To use Dolby Audio-Dolby Digital Plus in HDMI-ARC mode, your TV has to support Dolby Audio-Dolby Digital Plu.s.
2. Make sure that “No Encoding” is selected for bitstream in the digital audio output of the connected external device (e.g. Blu-ray DVD player, TV etc.).

Note

• The Dolby Audio-Dolby Digital Plus experience is only available when the soundbar is connected to the HDMI-ARC source via a HDMI cable above 1.4.
• The soundbar will still function when connected via other methods (such as a Digital Optical cable), but these are unable to support all of the Dolby Audio-Dolby Digital Plus features. Given this, our recommendation is to connect via HDMI, in order to ensure full Dolby Audio support.

Connect to HDMI ARC

Your soundbar supports HDMI with audio return channel (ARC). If your TV is HDMI ARC compliant, you can hear the TV audio through your soundbar by using a single HDMI cable.

1. On your TV, turn on HDMI-CEC operations. For details, see the TV user manual
   The HDMI ARC connector on the TV might be labeled differently. For details, see the TV user manual.

2. Using a High Speed HDMI cable,connect the HDMI ARC connector on your soundbar to the HDMI ARC connector on the TV.

Note

• Your TV must support the HDMI-CEC and ARC function. HDMI-CEC and ARC must be set to On.
• The setting method of HDMI-CEC and ARC may differ depending on the TV. For details about ARC function, please refer to your TV user manual.
• Make sure to use the HDMI cables that can support the ARC function.

Connect to Optical socket

• Using an optical cable, connect the Optical connector your soundbar to the Optical out connector on the TV or other device.
• The digital optical connector might be labeled Spdif or Spdif out.

Connect to AUX  socket

• Use a 3.5mm to  3.5mm audio c le to connect the TV’s headphone so et to the AUX socket on the unit.
• Use an RCA  to 3.5mm audio cable to connect the TV’s audio output sockets to the AUX socket on the unit.

Connect to power

• Before connecting the AC power cord, ensure you have completed all other connections.
• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit.

1. Connect the mains cable to the AC~ socket of the unit and then into a mains socket.
2. Connect the mains cable to the AC~ socket of the subwoofer and then into a mains socket.

Power cord quantity and plug type vary by regions.

Pair up with the subwoofer

Automatic pairing
Plug the soundbar and the subwoofer into the mains sockets and then press on the unit or remote control to switch the unit to ON mode. The subwoofer and soundbar will automatically pair.

Determine the status based on the wireless subwoofer indicator.

Tips

• Do not press Pair button on the rear of the Subwoofer, except for manual pairing.

Manual pairing
If no audio from the wireless subwoofer can be heard, manually pair up the subwoofer.

1. Unplug both power cables of subwoofer and soundbar, and then plug them in again after 3 minutes.
2. Press and hold the Pair button on the rear of the Subwoofer for 5 seconds. The indicator on the subwoofer will rapidly blink.
3. Press on the soundbar or remote control to switch on the soundbar to enter pairing mode automatically.
4. The indicator on the subwoofer will become solid in orange when successful.
5. If the indicator still keeps blinking,repeat step 1-3.

Tips

• The subwoofer should be within 6 m of the soundbar in an open area (the closer the better).
• Remove any objects between the subwoofer and the soundbar.
• If the wireless connection fails again, check if there is a confiict or strong interference (e.g. interference from an electronic device) around the location. Remove these conicts or strong interferences and repeat the above procedures.

Use your soundbar

This section helps you use the soundbar to play audio from connected devices.

Before you start

• Make the necessary connections described in the quick start guide and the user manual.
• Switch the soundbar to the correct source for other devices.

Turn ON and OFF

• When you first connect the unit to the main socket, the unit will be in STANDBY mode. The [Standby] indicator will light up.
• Press the button on the remote control or on the main unit to switch the main unit ON or OFF.
• Disconnect the main plug from the main socket if you want to switch the unit off completely.

Auto standby
The unit automatically turns to standby mode after about 15 minutes if the TV or the external unit is disconnected or switched off.

• To switch the unit off completely, remove the mains plug from the mains socket.
• Please turn the unit off completely to save energy when not in use.

Select source

1. Press the button r epeatedly on the unit or press the AUX, Optical, HDMI ARC, Pair/BT, USB buttons on the remote control to select the desired mode.
   The indicator light on the soundbar will show which mode is currently in use.

Pair/BT

• Connected

• Connection

| [BT] Solid white [BT] Blinking white
OPTICAL| [OPT] Solid white
HDMI ARC| [HDMI ARC] Solid white

Select equalizer (EQ) effect
Select predefined sound modes to suit you video or music.

1. Press the EQ button on the remote control to select your desired preset equalizer effects. Default mode is Movie

• Movie (5 LEDs blink): Create a surround listening experience. Ideal for watching movies.
• Music (4 LEDs blink): Create two-channel or multichannel stereo sound. Ideal for listening to music.
• Voice (3 LEDs blink): Create sound effect which makes human voice more clear and outstanding for listening.
• Stadium (2 LEDs blink): Create an atmosphere as if watching a sports game in a stadium.

Adjust the volume
When adjusting the volume of the soundbar and subwoofer, the status indicat ill increase / decrease the amount of light. According to the corresponding light display / blinking, determine the current volume level of the nd subwoofer.

Adjust the volume

1. Press +/- on the soundbar or press Vol+/Vol- on the remote control to increase /decrease the volume level. Adjust the treble and bass volume

2. Press – Bass +
   Press -Bass + on the remote control to increase/decrease subwoofer’s volume.

3. Press – Treble +
   Press -Treble + on the remote control to increase/decrease
   Treble’s volume.

By default, the Bass/Treble is set to 0.

Factory reset

Reset device to default setting.

1. Turn on the soundbar.
2. Press and hold local keys + and – for 8 secs. After all LEDs light up for 5 seconds , the [Standby] LED is in solid red.

Bluetooth operation
Through Bluetooth, connect the soundbar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio les stored on the device through your soundbar.

What you need

• A Bluetooth device which supports Bluetooth profile A2DP, AVRCP and is with Bluetooth version 5.0 + EDR.
• The maximum operational range between the soundbar and a Bluetooth device is approximately 10 meters (30 feet).

1. Press the button on the unit or press Pair/BT button on the remote control to switch the soundbar to Bluetooth mode.
   • The [BT] indicator will blink.
2. On the Bluetooth device, switch on Bluetooth, search for and select Philips TAB7207 to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth).
   • During connection, the [BT] indicator will blink.
3. Wait until you hear the voice prompt from the soundbar.
   • If successfully connected, the [BT] indicator will light up solidly.
4. Select and play audio files or music on your Bluetooth device.
   • During play, if a call comes in, music play pauses. Play resumes when the call ends.
   • If your Bluetooth device supports AVRCP profile, on the remote control you can press to skip to a track, or press to pause/resume play.
5. To disconnect Bluetooth connection and pair a new Bluetooth device：
   • Long press key on the unit or press and hold the Pair/BT button on the remote control to disconnect Bluetooth connection and enter pairing mode.

Note

• In an open space without obstructions， the maximum operational range between the soundbar and a Bluetooth device is approximately 10 meters (30 feet).
• Compatibility with all Bluetooth devices is not guaranteed.
• The music streaming may be interrupted by obstacles between the device and soundbar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency.’

USB operation
Enjoy audio on a USB storage device, such as an MP3 player and USB ash memory, etc.

1. Insert the USB device.
2. Press the button repeatedly on the unit or press the USB button on the remote control to select USB mode.
3. [AUX/USB] LED indicator blinks white.
4. During playback:

Tips

• This product may not be compatible with certain types of USB storage devices.
• If you use a USB extension cable, USB hub, or USB Multifunctional card reader, the USB storage device may not be recognized.
• Do not remove the USB storage device during file reading.
• This product can support USB devices with up to 128 GB of memory.
• This product can play MP3, WAV, FLAC.
• Support a USB port: 5V 500mA.

AUX / Optical / HDMI ARC operation

Ensure that the unit is connected to the TV or audio device.

1. Press the button repeatedly on the unit or press the AUX , Optical , HDMI ARC buttons on the remote to select the desired mode.
2. The indicator light on the soundbar will show which mode is currently in use.
   Status| LED State
   ---|---
   AUX| [AUX/USB] Solid white
   OPTICAL| [OPTICAL] Solid white
   HDMI ARC| [HDMI ARC] Solid white
3. Operate your audio device directly for playback features.
4. Press the +/- (volume) buttons to adjust the volume to your desired level.

Tip

• While in Optical/HDMI ARC mode, if there’s no sound output from the unit and the status indicator ashes, you may need to activate PCM or Dolby Digital signal output on your source device (e.g. TV, DVD or Blu-ray player).

Product specifications

Note

• Specifications and design are subject to change without notice.

Bluetooth

Amplifier Section

Output power        RMS 260W @THD<=10%;
Max. 520W

Soundbar

Subwoofer

Remote control

Supported Audio formats

Troubleshooting

Warning

• Risk of electric shock. Never remove the casing of the product.

To keep the warranty valid, never try to repair the product yourself.
If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support.

Main unit
The buttons on the main unit do not work.

• Disconnect form the power supply for a few minutes, and then connect again.

No power

• Ensure that the AC cord is properly connected.
• Ensure that there is power at the AC outlet.
• Press button on the remote control or soundbar to turn the soundbar on.

Sound
No sound from the soundbar speaker.

• Connect the audio cable from your soundbar to your TV or other devices. However, you do not need a separate audio connection when:
  • the soundbar and TV are connected through HDMl ARC connection, or
  • a device is connected to the HDMI in connector on your soundbar.
• On the remote control, select the correct audio input.
• Make sure that the soundbar is not muted.
• Reset this product to its factory settings (see “Factory reset”)

Distorted sound or echo.

• If you play audio from TV through this product, make sure that the TV is muted.

No sound from the wireless subwoofer.

• Manually connect the subwoofer to the main unit.

• Increase the volume. Press Vol+ on the remote control or + on the soundbar.
  When using either of the Digital input, if there is no audio:

  • Try setting the TV output to PCM or
  • Connect directly to your Blu-ray/other sources. Some TVs do not pass through digital audio.

• Your TV may be set to variable audio output. Confirm that the audio output setting is set to FIXED or STANDARD, not VARIABLE. Refer to your TV’s user manual for more detailed information.

• If using Bluetooth, ensure that the volume on your source device is turned up and that the device is not muted.

• When the playback freezes and there is no sound in Wi-Fi mode, please check whether your home network is normal.

Bluetooth
A device cannot connect with the soundbar.

• The device does not support the compatible profiles required for the soundbar.
• You have not enabled the Bluetooth function of the device. See the user manual of the device on how to enable the function.
• The device is not correctly connected. Connect the device correctly.
• The soundbar is already connected with another Bluetooth device. Disconnect the connected device, and then try again.

Quality of audio play from a connected Bluetooth device is poor.

• The Bluetooth reception is poor. Move the device closer to the soundbar, or remove any obstacle between the device and the soundbar.

I can’t find the Bluetooth name of this unit on my Bluetooth device.

• Ensure the Bluetooth function is activated on your Bluetooth device.
• Re-pair the unit with your Bluetooth device.

Remote control does not work.

• Before you press any playback control button, first select the correct source.
• Reduce the distance between the remote control and the unit.
• Insert the battery with its polarities (+/-) aligned as indicated.
• Replace the battery.
• Aim the remote control directly at the sensor on the front of the unit.

The soundbar turns off.

• When the unit’s external input signal level is too low, the unit will turn off automatically in 15 minutes. Please increase the volume level of your external device.

The subwoofer is idle or the indicator of subwoofer does not light up.

• Please unplug power cord from the mains socket, and plug it in again after 3 minutes to reset the subwoofer.

Trademarks

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by MMD Hong Kong Holding Limited is under license. Other trademarks and trade names are those of their respective owners.

Roku, the Roku logo, Roku TV, Roku TV Ready, and the Roku TV Ready logo are trademarks and/or registered trademarks of Roku, Inc. This product is Roku TV Ready-supported in the United States, Canada, United Kingdom, Mexico and Brazil. Countries are subject to change. For the most current list of countries in which this product is Roku TV Ready-supported, please email rokutvready@roku.com.

Specifications are subject to change without notice. Please visit
www.Philips.com/support for the latest updates and documents.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.
This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited. or one of its affiliates, and MMD Hong Kong Holding Limited. is the warrantor in relation to this product.
TAB7207_94_UM _V1.0

References

• Philips Customer Service Support - Home | Philips

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>