Schneider Electric GDE12271 SpaceLogic KNX USB Interface DIN Rail User Manual

: June 9, 2024
: Schneider Electric

Table of Contents

Schneider Electric GDE12271 SpaceLogic KNX USB Interface DIN Rail
SpaceLogic KNX USB Interface DIN Rail
About this document
For your safety
Getting to know the device
Connections and operating elements
Installation and connection
Technical data
Schneider Electric -Contact
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Schneider Electric GDE12271 SpaceLogic KNX USB Interface DIN Rail

SpaceLogic KNX USB Interface DIN Rail

MTN6502-0101https://go2se.com/ref=MTN6502-0101

About this document

You can find all the information required for safe installa-tion in this document.
More detailed product information is available on the Internet -> See QR code.

For your safety

DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH
Safe electrical installation must be carried out only by skilled professionals. Skilled professionals must prove profound knowledge in the following areas:

Connecting to installation networks
Connecting several electrical devices
Laying electric cables
Connecting and establishing KNX networks
Safety standards, local wiring rules and regulations

Failure to follow these instructions will result in death or serious injury.

Getting to know the device

The SpaceLogic KNX USB interface enables the connection of a PC for addressing, programming, and diagnostics of bus components. Connection via USB2 interface. The device is programmed locally with the physical address and therefore does not have a programming button and programming LED. The device supports KNX “long frame” communication and is compatible with KNX security telegrams/devices.

Connections and operating elements

A USB LED (multicolor)
B KNX LED (multicolor)
C USB connector(Type C)
D KNX bus connector
E Release lever for disassembly
F Cable cover

Installation and connection

A Installing
B Removing

WARNING
Risk of death from electric shock. The device can be damaged. Safety clearance must be guaranteed in accord ance with IEC 60664-1. There must be at least 4 mm between the individual cores of the 230 V supply cable and the KNX line A.

WARNING
Risk of death from electric shock. Only install devices with at least basic insulation next to the device. Failure to observe this instruction can result in death or serious injury.

Technical data

Power supply

Bus: via KNX Bus, < 3 mA
USB: via PC USB interface 5 V,<15 mA

Connection

KNX: Bus connecting terminal
USB: USB socket (Type C)
USB cable length: max. 4 m
Dimensions (LxWxD): 100x18x66 mm
Device width: 1 module = 18 mm

Dispose of the device separately from household waste at an official collection point. Professional recycling protects people and the environment against potential negative effects.

Schneider Electric -Contact

Schneider Electric Industries SAS 35 rue Joseph Monier
Rueil Malmaison 92500
France
If you have technical questions, please contact the Customer Care Centre in your country. se.com/contact

UK Representative Schneider Electric Limited Stafford Park 5 Telford, TF3 3 BL, UK