ANKER Nebula Capsule II User Guide
- June 9, 2024
- Anker
Table of Contents
Nebula Capsule II User Guide
Overview
Front View
Rear View
Top View
Bottom View
Remote Control
Note:
- Press and hted the for 2 seconds to engage autOfOcus
- The can be used only when the remote contrci is pawed with the projector ma Itbetcoth
Getting Started
- For fastener use. fully charge the built in battery by using the provided cable and charger
- Side off the battery cover and install 2 AAA batteries before using the remote control for the first time. Make sure the positron and negative ends are facing the correct polarity direction as marked in the battery compartment
- Hold (Don the projector for 2 seconds to power on the protector.
- Slightly move the projector to engage auto-locus
- For first-time use. follow the on screen instructions to complete the basic setup. Adjust settings in the projector’s Settings menu if necessary.
Using the Nebula Capsule II Install Netflix and Prime Video
- Down’oad Nebula Manner from your Nebula Capsule Its Google Play store With Nebula Manager, you can download and install apps such as Net-flat. Prime Video. and more.
- Follow the on-screen Instructions to install Nether and Prime video.
Install Nebula Connect App
To control the projector. download the Nebula Corned app from your phone’s
App Store POS devices) or Google Play (Android devices). Make sure your phone
and Nebula Capsule II are connected to the same wireless network
Important Safety Instructions
- Due to the enclosure material, the product must oNy be connected to a US8 interface of version 2.0 or higher.
- The adapter should be Installed near the ectiPment and must be easily accessible.
- Do not use the device in an environment where the temperature is too high or tco low. Never expose the device to strong sunshine or wet environments
- The ideal temperature range for this product and its axessones is ut -sst tic-ssc
- When charging place the device in an environment that has a normal room temperature and good ventiatton. It ts region nxmded to charge the devicen an environment with a temperature that ranges from 41’F 77’F / 5’C 25t.
- Only use the charger provided by the manufacturer Using unauthorized chargers may cause danger and violate the authorization of the projector as well as the guarantee.
- This charger is for indoor use only.
Notice This product complies with the radio interference requirements of
the European Community.
Declaration of Conformity Hereby. Anker Innovations Limited. declares
that this device is in compliance with the essential requirements and other
relevant provisions of Directive 2014/53/EU. For the Declaration of
Conformity, visit the Web site. https://ukseenebula.com/
This product complies with the radio Interference re-quirements of the United
Kingdom Declaration of Conformity Hereby, Anker innovations limited declares
that this de-vice is in compliance with Radio Equipment Regulations 2017(51
2017/1206). The full text of the UK declaration of conformity is available at
the following interact address: https://ukseenebula.com/
The charger type is a pN303E / PN303B with output of DC 15V/ 2A The plug of
the adapter is considered as thedisconnect device. Once unplugged the charger
is considered as cksconnected from the power source.RF exposure information:
The Maximum Permissible Exposure (MPE) level has been calculated based on a
distance of el=20 cm between the device and the human body. To maintain
compliance with RF exposure requirements, use products that maintain a 20cm
distance between the device and human body.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE
OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Wifi Operating Frequency
Range: 2412-2472 MHz (2.4G); 51505250 MHz. 572551350 MHz (5G) Will Max Output
Power: 16.86 d8m (2.4G); 15.52 d8m (5G) BT Operating Frequency Range:
2402-2480 MHz: BT Max Output Power. 9.60 dem 5150-5250 MHz can be used indoor
only.
The following Importer is the responsible party (contract for EU rrotters)
Anker Innovations Deutschland GmbH I Georg-Mude-Strasse 3, 80807 Munich,
Germans, The following Importer is the responsible party (contract for UK
matters): Anker Technology (UK) United I GNR8, 49 Clarendon Road, Watford,
Hertfordshire, WD17 1HP, United Kingdom Your product is designed and
manufactured with high quality materials and Components. which can be recycled
and reused. This symbol means the product must not be discarded as household
waste, and should be delivered to an appropriate collection facility for
recycling. Proper disposal and recycling helps protect natural resources,
human health and the environment. For more information on disposal and
recycling of this product, contact your local municipality, disposal service.
or the shop where you bought this product.
FCC Statement
This device compies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- This device must accept any interference received. inckidng interference that may cause undesired operation.
Warning: Changes or notifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device. pursuant to Past 15 of the FCC Rules. These
knits are designed to provide reasonable protection against harmful
interference in a residential installation. 9
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not instated
and used in accordance with the instruction manual, may cause harmful
interference to radio commun tenons. However, there is no guarantee that
interference will not occur In a Particular installation If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between equipment and receiver.
- Connect the equipment into an outlet on a arch different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF Exposure In Formation(SAR)
The SAR Int of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
Device type D2421 (FCC ID: 2A0K8.02421X) has also been tested against this SAR
limit. The highest SAR value reported under this standard during product
certification for use when properly worn on the body is 0.093 W/kg.
Notic : Shielded cabel.
AI connections to other computing devices must be mode using shielded
cables to maintain compliance with FCC regulations. The following importer Is
the responsble party. Company Name: Fantasia Trading LLC Address: 5350 Ontario
Mills Rim, Suite 100. Ontario. CA 91764
Telephone:1-800-988-7973
To get the full user manual, visit the website:
www.seenebula.com/downloads
Anker Innovations Limited Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong 11
NEBULA
For FAQs and more information. please visit:
www.SeeNebula.com
support@SeeNebula.com
+1(800) 988 7973 (US) Mon-Fri 9.00am – 5:00pm (PT)
c Anker Innovations Limited. All rights reserved.
NEBULA and the NEBULA logo are trademarks of Anker Innovations Limited,
registered in the United States and other countries,
Model: D2421 51005001428 V06
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>