midocean MO9168 Wireless Headphone User Manual
- June 9, 2024
- midocean
Table of Contents
midocean MO9168 Wireless Headphone User Manual
(2014/53/EU art. 10-8)
(a) Frequency Range; 2402-2480 MHz
(b) Maximum radio-frequency power; 100mW (EIRP)
2014/53/EU art. 10-9 Simplified Declaration of Conformity)
Hereby, MOB, declares that item MO9168 complies with the essential
requirements and other relevant conditions of directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following
internet address: www.momanual.com
MOB, PO BOX 644, 6710 BP (NL).
5.0 Wireless headphone
Product Parameters:
- Wireless Version: V5.0
- Working Distance Range: 10 M
- Frequency Range: 2.402GHz-2.480GHz
- Battery Specifications: 3.7V, 300mAh, Built-in rechargeable lithium battery
- Charging Voltage: DC 5V
- Charging Time: About 2 hours
- Talking/Music Time: About 8 hours
- Radiated Power: ≤ 20 dBm
Items Included:
- One foldable multifunction Wireless headset “MO9168”
- One charging cable
- One Aux-in cable
- One user manual
Button Description
ON/OFF: ON/OFF Switch
M: Three kinds of playback modes switch (TF Mode, Radio Mode and Wireless
Mode)
►||: Play or Pause Music/ Answer or Reject Calls
►►|/V +: Long press for next song or radio station/ short press for increasing
volume
|◄◄/V-: Long press for previous song or radio station/ short press for
reducing volume
Wireless Function Description: Pairing Operation:
-
To pair for the first time: Start up the Wireless headset. It will boot into Wireless mode automatically, voice prompts “Power
-
On”, LED indicator light rapidly flashes alternating with blue and green light. Please activate the smart device’s Wireless search function, and select the device “MO9168”, no password required, after successful pairing, voice prompts “Connected”, LED indicator light stays blue.
-
Re-pairing: Turn off the attached smart device’s Wireless
function, voice prompts “Disconnected”, the headset will
automatically re-enter pairing mode, LED indicator light rapidly flashes with blue and green lights. Open another smart device’s Wireless search function, and select the device “MO9168”, no password required, after successful pairing, voice prompts “Connected”, LED indicator light stays blue. -
Follow-up pairing: Automatically pairs the last connected device in 3 seconds after activation.
Answer Phone Calls:
Short press►|| when phone call is received.
Hang up Phone Calls:
Short press►|| after call has finished.
Reject Calls:
Long press►||.
Redial the last outgoing number:
Double-Click►||.
Music Play:
Short press►|| after connected with the smart device.
Micro SD Card playback mode
- When the slot is empty, insert the Micro SD Card, voice prompts “TF Mode”. Then it plays media automatically.
- When the Micro SD Card is inside, switch to TF Mode through M.
FM Radio Mode:
- When the headset is on, switch to FM mode through “M”, voice prompts “Radio Mode”.
- Usage Tips: short press “► II” to search and save stations automatically (it can be aborted with another short press while
searching). Once you enter the FM mode again, it will play the
first saved radio station automatically. If you want to re-scan,
short press “►II” again in the Radio mode.
Line-in Mode:
When the headset is on, insert the Line-in cable, voice prompts
“Line-in Mode”. Then it plays smart device’s media automatically.
- Maximum volume warning voice prompts “du du”.
- Supports MP3, WAV, and WMA format playback.
- Micro USB as common use charging port.
LED Indicator Light Status:
Charge Status| Steady red. When fully charged, the LED indicator light turns
off.
---|---
Power on Status| Blue LED indicator light turns on
Power off Status| LED indicator light turns off.
Pairing Status| Blue and green LED indicator lights rapidly alternating flash.
Standby Status| Blue LED indicator light turns on.
Connecte d Status| Blue LED indicator light turns on.
Wireless Mode, Blue LED indicator light flashes every two seconds
Radio Mode, Green LED indicator light turns on.
TF Mode, Green LED indicator light flashes every three seconds.
AUX-in Mode, the headset automatically turns off, LED light goes out.
Note:
If no pairing connection after the Wireless headset enters the
pairing mode, please turn off the headset and try again. Do not perform other
operations when searching Wireless to prevent a program error. Please select
the appropriate volume whilst in use to prevent damage to your ears. Please
note that a good environment while using the Wireless headset can avoid damage
to the headset. Please re-charge the headset after a long time of none-use.
“High sound pressure”
“Hearing damage risk”
“Do not listen at high volume levels for long periods”
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>