midocean MO6381 Oven Glove User Manual
- June 3, 2024
- midocean
Table of Contents
MO6381 Oven Glove
User Manual
MO6381 Oven Glove
Hereby, MOB, declares that item MO6381 is in Compliance with the essential
requirements and other relevant conditions of
Directive: (EU)2016/425. The full text of the EU declaration of conformity is
available at the following internet address:
www.momanual.com.
MOB, PO BOX 644, 6710 BP (NL).
PO:
41-108148
Made in China
http://qr.morethangiftscatalogue.com/compliance
Oven Glove
Standard compliance: EN407:2020 certified by Eurofins Textile & Testing Spain
Notified Body number: 2865
Contact heat: Level 2
EN 407:2020
| Level | Contact Temperature Tc °C | Threshold time t s |
|---|---|---|
| 1 | 100 °C | ≥ 15 |
| 2 | 250 °C | ≥ 15 |
| 3 | 350 °C | ≥ 15 |
| 4 | 500 °C | ≥ 15 |
Size
| MEASUREMENTS (glove) | DIMENSIONS (mm) |
|---|---|
| Contour of the glove (mm) | 190 |
| Total length(mm) | 280 |
| Fabric: | 100% Organic Cotton |
| --- | --- |
| Lining: | 100% Organic Cotton |
| Padding: | 100% Polyester |
Care Instructions:
- Machine washing in maximum temperature 30℃ and maximum 25 washes
- Do not bleach
- lron at a maximum sole-plate temperature of 150℃
- Dry cleaning with any solvent except tetrachlorethylene
Recommendations for use:
The objective of this glove is to protect the user against:
- This heat protective glove is a glove that is made of materials that provide insulation against high temperatures that may occur due to heat contact. The glove is providing protection when the users contacting the hot items, such as bowl, dishes, etc.
- It is recommended that the packaging is kept for possible reference.
- It is recommended that the glove be inspected and tested before use, and periodically during use, to ensure that no damage (such as holes, cracks, tears, colour change, etc.) is present, as this can significantly affect the expected protection. Please discard the glove if it is damaged.
- For preservation and storage, they should be kept away from heat sources and sources of light. Store in a cool, dry place.
How to put on / take off the glove:
- Put your hand inside the glove to fit the glove shape before usage and take out your hand from the glove after usage.
- Proper hand hygiene should be carried out before and after the use of protective gloves, either with soap and water or with disinfectant products with alcoholic solutions.
- When protective gloves are used, it is advisable to remove rings, watches, or any other beads that could damage the gloves in order to avoid breakage, perforation or tearing of the gloves.
Recommendations against incorrect use:
- This oven glove must never be used against risks other than those described above.
- Please do not contact with a naked flame.
- Before use, inspect the glove for any defects or imperfections.
- Discard gloves that are superficially soiled.
- Dirt impairs the performance of the glove.
- Do not use when there is a risk of entrapment by moving machine parts.
- It is recommended to check that the gloves are suitable for the intended use as conditions in the workplace may differ from the type test depending on temperature, abrasion and degradation.
Storage conditions:
Gloves may deteriorate prematurely due to excessive exposure to light,
atmospheric oxygen, and ozone. They should therefore be stored in the original
packaging in a cool, dry place.
Store in a dry and ventilated place with temperatures never below 2°C and
never above 50°C.
However, it is recommended to keep between 5°C and 35°C. Protect from
sunlight.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>