ZEBRONICS ZEB-BLASTO Tower Speaker User Manual

: June 9, 2024
: ZEBRONICS

Table of Contents

Introduction
Features
Specification
Package Content
Product Description
Remote Control
Instructions for Use:
General Instructions
INSTRUCTIONS FOR USING THE INTEGRATED BUTTON FUNCTIONS:-
INSTRUCTIONS FOR MIC SETTINGS:
CUSTOMER SUPPORT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ZEBRONICS ZEB-BLASTO Tower Speaker User Manual

Introduction

Dear Customer, Thank you for purchasing our ZEB-BLASTO Tower Speaker.
Please read the user manual carefully and save this manual for future reference
Note:

Avoid the usage of the product at high temperature and high humidity environment.
Avoid the self- disassembly of the product as it results in voiding your warranty.

Features

BTv5.0/USB/AUX/FM/MIC Input
LED display
16.51 cm Subwoofer
3 way speaker
Remote control
Karaoke
Wired Mic Included
Mic Port with Volume Control
Volume ,Bass &Treble control
LED Lights with ON/OFF switch

Specification

Output Power (RMS): 95W

Driver Size

Subwoofer: 16.51 cm
Mid: 10.16 cm
Tweeter: 10.16 cm

Impedance

Subwoofer: 8Ω
Mid: 4Ω
Tweeter: 4Ω
Frequency response: 20Hz- 20kHz
S/N Ratio: 70dB
Separation: 75dB
File format support(USB): MP3
Line input: 2ch RCA
Max supported
USB memory size: 32GB
FM frequency
scan range: 88 MHz-108 Mhz
BT name: ZEB-BLASTO
BT version: 5
Product Dimensions: 16.8 x 26 x 72.7 cm (W x D x H)
Net. Weight: 7 Kg

Package Content

Tower speaker: 1U
Remote: 1U
Wired Mic: 1U
QR Code Guide: 1U
Input Cable: 1U

Product Description

Front Panel

LED Display
Next+/Fine Tune +
Play-Pause/ FM-Scan
Prev-/Fine Tune –
Volume Control Knob
Input Mode
Equalizer (EQ)
USB Port
Bass Control Knob
Treble Control Knob
Mic. Volume Control Knob
Mic. Input Port

Back Panel

A: AUDIO INPUT (AUX)- STEREO INPUT These jacks are used to receive the STEREO signal from a CDNCD/DVD (2CH) player.
B: AC POWER-POWER ON and OFF This turns the power of the speaker ON/OFF. AC/IN (-230V 50/60Hz)AC Power Cord.

Remote Control

Power: standby ON/OFF
Numeric Pad( 0-9): To select particular track from USB drive directly or to enter FM Channel frequency directly
Vol+: To increase the volume
Prey: To select the previous tracks in BT/USB or to Tune in FM mode
Vol-: To decrease the volume
RPT: To Switch between available repeat modes
Scan: To scan all FM channels available
Mode: Mode Selection (BT/AUX/USB/FM)
EQ: Short press to control BASS and short Press again to control TREBLE. Long Press to use Equalizer
Play/Pause: To Play/ Pause the current track. To switch next channel in FM mode
Next: To select the next tracks in BT/USB or to Tune in FM mode
Mute: To Mute/ Unmute

Instructions for Use:

Button functions

Press the “Mode” button to change the input mode (BT/AUX/USB/FM) of the speaker.
Short press the “Next/FM tune” button to change the Next track or channel when in BT/USB mode or FM mode respectively.
Short press the “Prey/FM tune-” button to change the Previous track or channel when in BT/USB mode or FM mode respectively.
Short press the “Scan” button to scan all FM channels available.

General Instructions

BT Mode:
Power ON the speaker, press “Mode” button to switch to BT Mode.
Switch ON BT on your phone or tablet and search for nearby BT devices, Search for the BT name “ZEB BLASTO” and tap to connect it.

USB Mode:
The speaker automatically switches to USB input mode with the LED display when a USB flash drive is inserted (this mode isn’t selectable on the speaker or remote control unless a USB flash drive is connected).
Ensure that your USB flash drive contains MP3 audio files (other file types not supported).

FM radio:
Switch to FM mode by pressing the mode button.
In FM mode, long press on the Play/Pause button to Scan for the available FM channels.
Once the scanning process is done, the speaker plays the first scanned FM channel.
Now press on the next/prey button on the front panel to switch to the previous or next scanned FM channel.
Alternatively you can use the remote control to switch the FM channel by pressing the num pad of the remote control.

AUX-I N:
The speaker can be connected to an audio device by using the included RCA to 3.5mm cable.
Connect the RCA cable according to the color of the connector, and connect the other end of the cable to the input audio source.
Now you can play the audio content of the input device, which is directly delivered to the speakers.

INSTRUCTIONS FOR USING THE INTEGRATED BUTTON FUNCTIONS:-

Short press the Mode button on the integrated control panel or the remote control to change the speaker’s input mode (BT, AUX, USB, FM).
Short press on the Next button to switch to the next song in BT / USB mode or FM mode respectively.
Long press on the Prey button to switch to the previous song in BT / USB mode or FM mode respectively.
Short press on the Play/pause button to switch to pause or play the song played in the BT/ USB mode or FM mode respectively.
Long press on the Play/pause button to scan the available FM channels in the FM mode of the speaker.
Short press on the EQ button to change the Equalizer functions of the speaker.
Adjust the Volume control knob on the front panel of the speaker to increase/decrease the volume of the speaker.
Adjust the Bass/Treble/MIC.Vol Control knob on the front panel of the speaker to increase/decrease the Bass, Treble and microphone volume of the speaker.
Toggle the power switch on the rear panel of the speaker to Turn on/ off the speaker.
Toggle the LED switch on the rear panel of the speaker to Turn on/off the Front panel RGB light on the speaker.

INSTRUCTIONS FOR MIC SETTINGS:

Press and hold the EQ button twice to toggle the microphone Echo adjustment feature.
To adjust the microphone Echo feature press “Vol +” to increase the Echo of the microphone output or “Vol -“to decrease the Echo of the microphone output.
Press and hold the EQ button twice to toggle the microphone Volume adjustment feature.
To adjust the microphone volume feature press “Vol +” to increase the Volume of the microphone output or “Vol -“to decrease the volume of the microphone output.
Press and hold the EQ button thrice to toggle the microphone priority feature.
To adjust the microphone priority feature press “Vol +” to increase the priority of the microphone output or “Vol -“to decrease the priority of the microphone output.