Indesit DIE 2B19 A Dishwasher User Guide

Indesit DIE 2B19 A Dishwasher

THANK YOU FOR BUYING A INDESIT PRODUCT.
In order to receive more complete assistance, please register your appliance at: www.indesit.com/register

PRODUCT DESCRIPTION

APPLIANCE

1. Upper rack
2. Foldable flaps
3. Upper rack height adjuster
4. Upper spray arm
5. Lower rack
6. Cutlery basket
7. Lower spray arm
8. Filter Assembly
9. Salt reservoir
10. Detergent and Rinse Aid dispensers
11. Rating plate
12. Control panel

CONTROL PANEL

1. ON-OFF / Reset button with indicator light
2. Program selection button / Push&Go
3. Salt refill indicator light
4. Program indicator lights
5. START/Pause button with indicator light

FIRST TIME USE

SALT, RINSE AID, AND DETERGENT

ADVICE REGARDING THE FIRST-TIME USE
After installation, remove the stoppers from the racks and the retaining elastic elements from the upper rack.

FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and on the machine’s functional components.

• It is mandatory that THE SALT RESERVOIR NEVER BE EMPTY.
• It is important to set the water hardness.

The salt reservoir is located in the lower part of the dishwasher (see PRODUCT DESCRIPTION) and must be filled when the SALT REFILL indicator light in the control panel is lit.

1. Remove the lower rack and unscrew the reservoir cap (anticlockwise).
2. Only the first time you do this: fill the salt reservoir with water.
3. Position the funnel (see figure) and fill the salt reservoir right up to its edge (approximately 1 kg); it is not unusual for a little water to leak out.
4. Remove the funnel and wipe any salt residue away from the opening.

Make sure the cap is screwed on tightly so that no detergent can get into the container during the wash program (this could damage the water softener beyond repair).
Whenever you need to add salt, it is mandatory to complete the procedure before the beginning of the washing cycle to avoid corrosion.

SETTING THE WATER HARDNESS
To allow the water softener to work in a perfect way, it is essential that the water hardness setting is based on the actual water hardness in your house. This information can be obtained from your local water supplier.

The factory sets the default value for the water hardness:

• Switch on the appliance by pressing the ON/OFF button.
• Switch off the appliance by pressing the ON/OFF button.
• Hold down button P for 5 seconds, until you hear a beep.
• Switch on the appliance by pressing the ON/OFF button.
• The program indicator light of the current set level flashes.
• Press button P to select the desired hardness level (see WATER HARDNESS TABLE).

Water Hardness Table

Level| °dH

German degrees

| °fH

French degrees

| °Clark

English degrees

1| Soft| 0 – 6| 0 – 10| 0 – 7
2| Medium| 7 – 11| 11 – 20| 8 – 14
3| Average| 12 – 16| 21 – 29| 15 – 20
4| Hard| 17 – 34| 30 – 60| 21 – 42
5| Very hard| 35 – 50| 61 – 90| 43 – 62

Switch off the appliance by pressing the ON/OFF button.

The setting is complete!
As soon as this procedure is complete, run a program without loading. Only use salt that has been specifically designed for dishwashers. After the salt has been poured into the machine, the SALT REFILL indicator light switches off. If the salt container is not filled, the water softener and the heating element may be damaged as a result of limescale accumulation. Using Salt is recommended with any type of dishwasher detergent.

FILLING THE RINSE AID DISPENSER
Rinse aid makes dish DRYING easier. The rinse aid dispenser A should be filled when the dark optical indicator on the dispenser door C becomes transparent .

1. Open dispenser B by pressing and pulling up the tab on the lid.
2. Pour in the rinse aid (max.110 ml), making sure it does not overflow from the dispenser. If this happens, clean the spill immediately with a dry cloth.
3. Press the lid down until you hear a click to close it. NEVER pour the rinse aid directly into the appliance tub.

ADJUSTING THE DOSAGE OF RINSE AID

If you are not completely satisfied with the drying results, you can adjust the quantity of rinse aid used.

• Switch the dishwasher on using the ON/OFF button.
• Switch it off using the ON/OFF button.
• Press button P three times – a beep will be heard.
• Switch it on using the ON/OFF button.
• The program indicator light of the current set level flashes.
• Press button P to select the level of rinse aid quantity to be supplied.
• Switch it off using the ON/OFF button

The setting is complete!
If the rinse aid level is set to 1 (ECO), no rinse aid will be supplied. A maximum of 5 levels can be set according to the dishwasher model. The factory setting is specific to the model, please follow the instructions above to check this for your machine.

• If you see bluish streaks on the dishes, set a low number (2-3).
• If there are drops of water or limescale marks on the dishes, set a mid-range number (4-5 ).

FILLING THE DETERGENT DISPENSER
To open the detergent dispenser use the opening device D. Introduce the detergent into the dry dispenser E only. Place the amount of detergent for pre-washing directly inside the tub.

1. When measuring out the detergent refer to the mentioned earlier information to add the proper quantity. Inside the dispenser E, there are indications to help the detergent dosing.
2. Remove detergent residues from the edges of the dispenser and close the cover until it clicks.
3. Close the lid of the detergent dispenser by pulling it up until the closing device is secured in place.

The detergent dispenser automatically opens up at the right time according to the program. Usage of detergent not designed for dishwashers may cause malfunction or damage to the appliance.

PROGRAMS TABLE

ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.

Note for Test Laboratories:
For information on comparative EN testing conditions, please send an email to the following address: assistenza_en_lvs@indesitcompany.com

Pre-treatment of the dishes is not needed before any of the programs.
Values given for programs other than the eco-program are indicative only. The actual time may vary depending on many factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of load, load balancing, additional selected options, and sensor calibration. The sensor calibration can increase program duration by up to 20 min.

PROGRAMS DESCRIPTION

Instructions on wash cycle selection.

1. ECO
   Eco program is suitable to clean normally soiled tableware, that for this use, it is the most efficient program in terms of its combined energy and water consumption, and it is used to assess compliance with the EU Ecodesign legislation.

2. INTENSIVE
   Program recommended for heavily soiled crockery, especially suitable for pans and saucepans (not to be used for delicate items).

3. MIXED
   Mixed soil. For normally soiled dishes with dried food residues.

4. FAST &CLEAN 28’
   Program to be used for a half load of lightly-soiled dishes with no dried food residues. Does not have a drying phase.

5. PUSH & GO
   Everyday wash and dry cycle ensure great cleaning performance in a short time without the need to pre-treat dishes.

Notes: Please note that cycle Fast&Clean is dedicated to lightly soiled dishes.

PUSH &GO

Push&Go (P) button is an easily distinguishable button that allows you direct access to the Push&Go program, a wash-and-dry cycle that ensures great cleaning performance in a short time. You don’t have to worry about which program to choose, Push&Go cycle will do the work for you. To select Push&Go program, switch on the appliance, press only the P button for 3 seconds (the corresponding indicator lights up), and close the door within 4 seconds.

LOADING THE RACKS

UPPER RACK

Load delicate and light dishes: glasses, cups, saucers, and low salad bowls.

ADJUSTING THE HEIGHT OF THE UPPER RACK

The height of the upper basket can be adjusted: A high position to place bulky crockery in the lower basket and a low position to make the most of the tip-up compartments by creating more space upwards. The upper rack is equipped with an Upper Rack height adjuster (see figure), without pressing the levers, lift it up by simply holding the rack sides, as soon as the rack is stable in its upper position. To restore to the lower position, press the levers (A) at the sides of the rack and move the basket downwards. We strongly recommend that you do not adjust the height of the rack when it is loaded.
NEVER raise or lower the basket on one side only.

FOLDABLE FLAPS WITH ADJUSTABLE POSITION

The side foldable flaps can be folded or unfolded to optimize the arrangement of crockery inside the rack. Wine glasses can be placed safely in the foldable flaps by inserting the stem of each glass into the corresponding slots.

Depending on the model:

• to unfold the flaps there is needed to slide it up and rotate or release it from the snaps and pull it down.
• to fold the flaps there is needed to rotate them and slide flaps down or pull them up and attach flaps to the snaps.

LOWER RACK

For pots, lids, plates, salad bowls, cutlery, etc… Large plates and lids should ideally be placed at the sides to avoid interferences with the spray arm.

CUTLERY BASKET
The basket is equipped with top grilles for improved cutlery arrangement. The cutlery basket should be positioned only at the front of the lower rack.

Knives and other utensils with sharp edges must be placed in the cutlery basket with the points facing downwards or they must be positioned horizontally in the tip-up compartments on the upper rack.

DAILY USE

1. CHECK WATER CONNECTION: Check that the dishwasher is connected to the water supply and that the tap is open.
2. SWITCH ON THE DISHWASHER: Open the door and press the ON/OFF button.
3. LOAD THE RACKS (see LOADING THE RACKS)

FILLING THE DETERGENT DISPENSER

1. CHOOSE THE PROGRAM AND CUSTOMISE THE CYCLE: Select the most appropriate program in accordance with the type of crockery and its soiling level (see PROGRAMS DESCRIPTION) by pressing the P button.
2. START: Start the wash cycle by pressing the START/Pause button (the led is lit) and closing the door within 4 sec. When the program starts you hear a single beep. If the door was not closed within 4sec., the alarm sound will be played. In this case, open the door, press the START/Pause button, and close the door again within 4 sec.
3. END OF WASH CYCLE: The end of the wash cycle is indicated by beeps and by the flashing of the indicator light of the selected program. Open the door and switch off the appliance by pressing the ON/OFF button. Wait for a few minutes before removing the crockery – to avoid burns. Unload the racks, beginning with the lower one. The machine will switch off automatically during certain extended periods of inactivity, in order to minimize electricity consumption. If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly.

MODIFYING A RUNNING PROGRAM
If a wrong program was selected, it is possible to change it, provided that it has only just begun: open the door, press and hold the ON/OFF button, and the machine will switch off. Switch the machine back on using the ON/OFF button and select the new wash cycle and any desired options; Start the wash cycle by pressing the START/Pause button and closing the door within 4 sec.

ADDING EXTRA CROCKERY
Without switching off the machine, open the door (START/Pause led starts blinking) (be aware of HOT steam!) and place the crockery inside the dishwasher. Press the START/Pause button and close the door within 4 sec., and the cycle will resume from the point at which it was interrupted.

ACCIDENTAL INTERRUPTIONS
If the door is opened during the wash cycle, or if there is a power cut, the cycle stops. Press the START/Pause button and close the door within 4 sec., and the cycle will resume from the point at which it was interrupted.

ADVICE AND TIPS

TIPS
Before loading the baskets, remove all food residues from the crockery and empty the glasses. You do not need to rinse beforehand under running water. Arrange the crockery so that it is held in place firmly and does not tip over; arrange the containers with the openings facing downwards and the concave/convex parts are placed obliquely, thus allowing the water to reach every surface and flow freely.

Warning: lids, handles, trays, and frying pans do not prevent the sprayer arms from rotating.

Place any small items in the cutlery basket. Very soiled dishes and pans should be placed in the lower basket because, in this sector, the water sprays are stronger and allow a higher washing performance. After loading the appliance, make sure that the sprayer arms can rotate freely.

UNSUITABLE CROCKERY

• Wooden crockery and cutlery.
• Delicately decorated glasses, artistic handicrafts, and antique crockery. Their decorations are not resistant.
• Parts in synthetic material that do not withstand high temperatures.
• Copper and tin crockery.
• Crockery soiled with ash, wax, lubricating grease, or ink. The colors of glass decorations and aluminum/silver pieces can change and fade during the washing process. Some types of glass (e.g. crystal objects) can become opaque after a number of wash cycles too.

DAMAGE TO GLASS AND CROCKERY

• Only use glasses and porcelain guaranteed by the manufacturer as dishwasher safe.
• Use a delicate detergent suitable for crockery
• Collect glasses and cutlery from the dishwasher as soon as the wash cycle is over.

TIPS ON ENERGY SAVING

• When the household dishwasher is used according to the manufacturer’s instructions, washing tableware in a dishwasher usually consumes less energy and water than hand dishwashing.
• In order to maximize dishwasher efficiency it is recommended to initiate the wash cycle once the dishwasher is fully loaded. Loading the household dishwasher up to the capacity indicated by the manufacturer will contribute to energy and water savings. Information on the correct loading of tableware can be found in the Loading chapter. In case of partial loading, it is recommended to use a dedicated wash option if available (Half load/ Zone Wash, Multizone), filling up only selected racks. Incorrect loading or overloading of the dishwasher may increase resource usage (such as water, energy, and time, as well as increasing noise level), reducing cleaning and drying performance.
• Manual pre-rinsing of tableware items leads to increased water and energy consumption and is not recommended.

HYGIENE
To avoid odour and sediment which can be accumulated in the dishwasher please run a high-temperature program at least once a month. Use a teaspoon of detergent and run it without loading to clean your appliance.

CARE AND MAINTENANCE

CLEANING THE FILTER ASSEMBLY

Regularly clean the filter assembly so that the filters do not clog and that the waste water flows away correctly. Using a dishwasher with clogged filters or foreign objects inside the filtration system or spray arms may cause unit malfunction resulting in loss of performance, noisy work, or higher resource usage. The filter assembly consists of three filters that remove food residues from the washing water and then recirculate the water. The dishwasher must not be used without filters or if the filter is loose.

At least once per month or after every 30 cycles, check the filter assembly and if necessary clean it thoroughly under running water, using a non-metallic brush and following the instructions below:

1. Turn the cylindrical filter A in an anti-clockwise direction and pull it out (Fig 1).
2. Remove the cup filter B by exerting a slight pressure on the side flaps (Fig 2).
3. Slide out the stainless-steel plate filter C (Fig 3).
4. In case you find foreign objects (such as broken glass, porcelain, bones, fruit seeds, etc.) please remove them carefully.
5. Inspect the trap and remove any food residues. NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).

After cleaning the filters, re-place the filter assembly and fix it in position correctly; this is essential for maintaining the efficient operation of the dishwasher.

CLEANING THE WATER INLET HOSE
If the water hoses are new or have not been used for an extended period of time, let the water run to make sure it is clear and free of impurities before performing the necessary connections. If this precaution is not taken, the water inlet could become blocked and damage the dishwasher.

CLEANING THE SPRAY ARMS
On occasions, food residue may become encrusted onto the spray arms and block the holes used to spray the water. It is therefore recommended that you check the arms from time to time and clean them with a small non-metallic brush.

To remove the upper spray arm, turn the plastic locking ring in an anti- clockwise direction. The upper spray arm should be replaced so that the side with the greater number of holes is facing upwards.

The lower spray arm may be removed by pulling it upwards.

WATER SOFTENING SYSTEM

Water softener automatically reduces water hardness, consequently preventing scale buildup on the heater, contributing also to better cleaning efficiency.
This system regenerates itself with salt, therefore it is required to refill the salt container when empty.

The frequency of regeneration depends on the water hardness level setting regeneration takes place once per 5 Eco cycles with the water hardness level set to 3. The regeneration process starts in the final rinse and finishes in the drying phase before the cycle ends.

• Single regeneration consumes: ~3.5L of water;
• Takes up to 5 additional minutes for the cycle;
• Consumes below 0.005kWh of energy.

TROUBLESHOOTING

In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. For other errors or issues please contact authorized After-sales Service whose contact details can be found in the warranty booklet. The manufacturer ensures the availability of spare parts for at least 10 years after the production date of this appliance.

(After refill the salt indicator may remain lit for several wash cycles).

| Refill the reservoir with salt (for more information – see page 2). Adjust water hardness – see table, page 2.
The dishwasher won’t start

or does not respond to com- mands.

| The appliance has not been plugged in properly.| Insert the plug into the socket.
Power outage.| For safety reasons, dishwasher will not re-start automatically when power returns. Open dishwasher door, press Start button and close the door within 4 seconds.
The dishwasher door is not closed.| Vigorously push the door until you hear the “click”.
Cycle is interupted by door opening for more than 4 seconds.| Press START/Pause and close the door within 4 seconds.

It does not respond to commands.

| Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately one minute and restart the program. If problem persists, unplug the appliance for 1 minute, then plug it back in.
The dishwasher won’t drain.| The wash cycle has not finished yet.| Wait until the wash cycle finishes.
The drain hose is bent.| Check that the drain hose is not bent (see INSTALATION INSTRUCTION).
The sink drain pipe is blocked.| Clean the sink drain pipe.
The filter is clogged up with food residues.| Clean the filter (see CLEANING THE FILTER ASSEMBLY).
The dishwasher makes excessive noise.| The dishes are rattling against each other.| Position the crockery correctly (see LOADING THE RACKS).

An excessive amount of foam has been produced.

| The detergent has not been measured out correctly or it is not suitable for use in dishwashers (see FILLING THE DETERGENT DISPENSER). Restart the cur- rent cycle by switching OFF the dishwasher, then switch it on again, select a new program, press START/Pause and close the door within 4 seconds. Please do not add any detergent.
The dishes are not clean.| The crockery has not been arranged properly.| Arrange the crockery correctly (see LOADING THE RACKS).
The spray arms cannot rotate freely, being hindered by the dishes.| Arrange the crockery correctly (see LOADING THE RACKS).
The wash cycle is too gentle.| Select an appropriate wash cycle (see PROGRAMS TABLE).
An excessive amount of foam has been produced.| The detergent has not been measured out correctly or it is not suitable for use in dishwashers (see FILLING THE DETERGENT DISPENSER).
The cap on the rinse aid compartment has not been shut correctly.| Make sure the cap of the rinse aid dispenser is closed.
The filter is soiled or clogged.| Clean the filter assembly (see CARE AND MAINTENANCE).
There is no salt.| Fill the salt reservoir (see FILLING THE SALT RESERVOIR).
The dishwasher does not fill the water.

All LEDs are blinking rapidly

| No water in the water supply or the tap is closed.| Make sure there is water in the water supply or the tap running.
The inlet hose is bent.| Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dish-

washer and reboot.

The sieve in the water inlet hose is clogged; it is necessary to clean it| After having carried out the verification and cleaning, turn off and turn on the dishwasher and restart a new program.
Dishwasher finishes the cycle prematurely.| Drain hose positioned too low or siphoning into home sewage system.| Check if end of the drain hose is placed at correct height (see INSTALLATION). Check for siphoning into home sewage system, install air admittance valve if necessary.
Air in water supply.| Check water supply for leaks or other issues letting air inside.

You can download the Safety Instructions, User Manual, Product Fiche, and Energy data by:

• Visiting our website: docs.indesit.eu
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet).
• When contacting our After-sales Service, please state the codes provided on your product’s identification plate.

FAQ’s

Is salt necessary for Indesit dishwashers?

Even if you reside in a region with soft water, you still need salt in every dishwasher.

Why are dishwashers left on for three hours?

Dishwashers of the present day are more effective than those of the past since they use less water and energy than previous ones. In order to maintain the same level of performance and give sensors time to determine whether your dishes are being cleaned thoroughly, they must run longer.

How many cycles does a dishwasher require?

The majority of typical dishwashers have at least three cycles: a gentle cycle, frequently applied to delicate plates and glassware. For everyday dishes and flatware, a typical cycle. For objects that require a more thorough cleaning, use a heavy cycle.

Is installation possible? Can I recycle my old one?

You must hire a local handyman or kitchen fitter because installing one is simple if the plumbing is already in place.

What size plate can fit on the bottom rack without slamming into the revolving arm?

24 cm, or 9 1/2 inches, separates the revolving arm from the bottom of the basket.

Why doesn’t my Indesit dishwasher clean dishes thoroughly?

Make sure the filter in the dishwasher’s base is clear and unobstructed. Verify that the waste hose is not kinked or stuck since this could also prevent the wastewater from leaving your Indesit appliance.

How long is a cycle on an Indesit dishwasher?

The fastest and most efficient cleaning cycle available from Indesit takes only 28 minutes. Finest cleaning outcomes for grime that has been baked on. Has auto clean technology as well. Choose a time for your wash cycle that works for you.

How can you tell when an Indesit dishwasher is done?

The END indication light will turn on at the conclusion of the wash cycle. By pushing the ON/OFF button, turn off the water valve, unhook the appliance from the electrical outlet, and turn the appliance off.

What is the door’s intended size?

The dishwasher fits into a space that is 600 mm wide; the door I have installed on mine is 720 mm high and 595 mm wide.

How should my Indesit dishwasher be used?

Make sure the upper and lower arms of the dishwasher may freely revolve before loading it and adding the detergent. To turn the appliance on, press the On/Off button. By selecting the necessary application, clicking the START/PAUSE button, and then closing the door, the program will begin.

Does the lower tray accommodate standard-sized plates? Denby dinnerware wouldn’t fit in my previous dishwasher.

Yes, if you’re referring to dinner plates. I’ve also placed huge bowls at the bottom.

Do I need to connect a door to the dishwasher’s front?

Yes, you must install a door. The dishwasher comes with the necessary installation kit.

Download this PDF Link:Indesit DIE 2B19 A Dishwasher User Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>