YOUSHENG EC01 OBD Tool Instructions
- June 9, 2024
- YOUSHENG
Table of Contents
YOUSHENG EC01 OBD Tool
FCC ID: 2A9X5-EC01
Please read the instructions carefully and keep it properly.
Product introduction
Product size：545020mm
Install
Insert OBD Tool into the OBD interface slot of the vehicle.
Connect
According to the system version of the mobile phone, scan the QR code suitable
for the current mobile phone system for downloading.
IMPORTANT SAFETY INSTRUCTIONS
Do not disassemble the device ! Any changes or modifications could void the
warranty and user’s authority to operate this equipment.
All wireless data transferring devices produce interference that may affect
other devices which are placed nearby.
Do not use OBD if it distracts driver or causes inconvenience due to OBD Ⅱ
placement. Device must not interfere with driving or driver.
Please consult representatives of your vehicle model regarding OBD Ⅱ location
on your vehicle in case you are not sure of proper connection， please consult
qualified personnel.
The device is susceptible to water and humidity.
ATTENTION! The device uses SELV limited power source. The nominal voltage
is 12V DC. The allowed range of voltage is 10V…30V DC.
FCC REGULATIONS
This device complies with part 15 of the FCC Rules. Operation is subject to the following two condition:
- This device may not cause harmful interference and
- This device must accent any interference received including interference that may cause undesired operation.
Changes or modifications not expressly approved by the manufacturer could void
the users authority operate the equipment.
The antenna(s) used for this transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter and must be installed to
provide a separation distance of at least 20cm from all persons.
This equipment has been tested and found to comply with the limits for a Class
B digital device. pursuant to part 15 of the FCC Rules.
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications However there is no guarantee that
interference will not occur in a particular installation if this equipment
does cause harmful interference to radio or television reception which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receive.
- Connect the equipment into an outlet on a circuit different from ins to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>