Schneider Electric LVS04662 Linergy Fixed Bracket Vertical Side Bars Instruction Manual
- June 9, 2024
- Schneider Electric
Table of Contents
LVS04662 Linergy Fixed Bracket Vertical Side Bars
Instruction Manual
LVS04662 Linergy Fixed Bracket Vertical Side Bars
PLEASE NOTE
Electrical equipment should be installed, operated, serviced, and maintained
only by qualified personnel.
No responsibility is assumed by Schneider Electric for any consequences
arising out of the use of this material.
PrismaSeT switchboards equipped with. the Linergy busbar connection system and
Schneider Electric switchgear are subject to IEC 61439-1 & 2 certification.
The instructions in this document describe how to fit Linergy in a PrismaSeT
switchboard.
The installer is fully liable if it is fitted in any other switchboard.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH Linergy LGYE and Linergy
BS busbars must be mounted using supports, references LVS04664 and
LVS04662, in accordance with the instructions given in this document. Failure
to follow these instructions will result in death or serious injury.
PLEASE NOTE
If mounting Linergy LGYE busbars in a 4P installation with joints on the front
of an upright, brackets for the joint screen kit for the neutral conductor
(reference LVS04624) must be used instead of brackets reference LVS04664.
Schneider Electric Industries SAS
35, rue Joseph Monier
92500 Rueil-Malmaison
France
www.se.com
As standards, specifications and designs change from time to time, please ask
for confirmation of the information given in this publication.
This document has been printed on ecological paper.
Schneider Electric Limited
Stafford Park 5
Telford, TF3 3BL
United Kingdom
www.se.com/uk
© 2022 Schneider Electric – All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>