MIYOTA JS10 Small Second Chronograph Instruction Manual
- June 9, 2024
- MIYOTA
Table of Contents
Cal. JS10 Instruction manual
【Displays and Buttons】
A) SETTING THE TIME
- Pull the crown out to the 1st Click Position.
- Turn the crown to set hour and minute hands.
B) USING THE STOPWATCH
This stopwatch is able to measure and display time in 1/1 second united up to
maximum of 30 minutes.
Stopwatch will stop automatically after running continuously for 30 minutes.
Measuring time with the stopwatch
- Press button ” A ” to start the stopwatch.
- The stop watch can be started and stopped each time button “A” is pressed.
- Pressing button “B” resets the stopwatch and stopwatch minute and second hands return to their Zero positions.
C) STOPWATCH RESET (INCL. AFTER REPLACING BATTERY)
This procedure should be performed when the stopwatch second hand does not
return to the Zero second.
- Pull the crown out to the 1st Click Position.
- Press the button “A” to set the stopwatch second hand forward.
Press the button “B” to set the stopwatch second hand back.
- The stopwatch minutes hand is synchronized with stop watch second hand.
- The stopwatch second hand can be advanced rapidly by continuously pressing button “A” or “B”. 3. Once the hands been zeroed, reset the time and return the crown to its normal position.
These specifications might be changed without prior notice.
Documents / Resources
|
MIYOTA JS10 Small Second
Chronograph
[pdf] Instruction Manual
JS10 Small Second Chronograph, JS10, Small Second Chronograph, Second
Chronograph, Chronograph
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>