MIYOTA 6T15 Small Automatic Mechanical Movement Instruction Manual
- June 1, 2024
- MIYOTA
Table of Contents
MIYOTA 6T15 Small Automatic Mechanical Movement
Product Specifications
- Model : Cal. 6T15
- Display : Hour, Minute, Second
- Crown Positions: 1st and 2nd position
- Date Setting: Variable position based on models
Product Usage Instructions
Setting the Time
- Pull the crown out to the 1st position.
- Turn the crown to set the hour and minute hands.
- Push back the crown to the normal position. Note that the second-hand does not stop in either crown position.
Setting the Date
- Pull the crown out to the 1st position.
- Pull the crown from the 1st position to the 2nd position; this action will advance the date by one day.
- After setting the date, push the crown back to the normal position.
Note: These specifications are subject to change without prior notice.
FAQ
- Q: How do I know which position is the Date setting on my specific model?
- A: The Date position may vary depending on the specific model. Refer to your model’s user manual for exact instructions.
- Q: Do I need to stop the second hand to set the time or date?
- A: No, the second does not stop when setting the time or date. It continues moving in both crown positions.
DISPLAY
- Date positions may be located at different positions depending on models.
SETTING
SETTING THE TIME
- Pull the crown out to the 1st position.
- Turn the crown to set hour and minute hands.
- Push back the crown to the normal position.
- Secondhand does not stop in either crown position.
SETTING THE DATE
- Pull the crown out to the 1st position.
- Pull the crown from the 1st position to the 2nd position, then the date advances one day.
- After the date has been set, push the crown back to its normal position.
These specifications might be changed without prior notice.
Read User Manual Online (PDF format)
Loading......