AFT PRO-88 USB 3.1 Gen 1 Media Reader Hub User Guide

: June 17, 2024
: AFT

Table of Contents

Contents
Installation Setup
Limited Warranty
Technical Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

AFT PRO-88 USB 3.1 Gen 1 Media Reader Hub User Guide

PRO-88 x 1
USB 3.1 Gen 1 A-B Cable x 1 – Connects PRO-88 to USB 3.1 Gen 1 port Computer
Screws Kit x 1 – To Securely mount the PRO-88 to Computer Chassis

Installation Setup

Install 5.25″ Media Reader

Open computer case cover, then remove 5.25″ front drive bay cover.
Insert PRO-88 into empty 5.25″ drive bay.
Apply screws on each side of unit to secure to chassis.

Connection of USB 3.1 Gen 1 Cable
Plug the USB cable into the USB 3.1 Gen 1 Type-A port on your computer.
Route the USB cable inside the computer chassis. (See diagram below) USB cable can also be routed through the PCIe Slot Cover

Connection of Media Reader
Connect the USB cable and SATA power cable to rear ports of PRO-88.
Reinstall the computer case cover and Power up your computer system.
SATA Power Cable needs to be connected for PRO-88 to function

Limited Warranty

Atech Flash Technology, Inc. (“AFT”), warrants to the original end user (“Customer”) that under normal intended use AFT memory flash card readers will be free from defects in materials and workmanship for one (1) year from the date of purchase. During warranty period, AFT shall either repair, or replace defective product. AFT shall not be liable for any losses or damages of any kind resulting from the use of AFT products or for any of Customer’s data stored on products returned to AFT for service. AFT accepts no liability for and provides no expressed or implied warranty against any loss of data or images.

You may register your product at http://www.atechflash.com. Customer must have proof of purchase and obtain warranty service authorization from AFT within the applicable warranty period before returning defective products to AFT. Returned products must be shipped prepaid and packaged appropriately, and it is recommended that they be insured or sent by a method that provides for tracking of the package.

Limitations: This limited warranty is in lieu of all other warranties, terms or conditions; including warranties, terms, or conditions of merchantability, fitness for a particular purpose, satisfactory quality, suppliers, and in no event will AFT be liable for any special, incidental, consequential, or indirect damages resulting from the possession, use or failure of this product. Product names mentioned herein are for identification purposes only and may be trademarked and/or registered trademarks of their respective companies.

Media Cards Compatibility Note
Media cards may not work properly when working with AFT product. If you encounter this problem, contact AFT Tech Support for compatible media card list and potential driver support and updates.

Specifications are subject to change without further notice.
All trademarks, trade names and copyrights are properties of their respective owners.

QR Code