alza power APW-WC250B Wireless Charger User Manual

June 9, 2024
alza power

alza power APW-WC250B Wireless Charger

alza-power-APW-WC250B-Wireless-Charger-PRODUCT

THANK YOU FOR CHOOSING US!

  • We value your trust. We hope that you will be happy with our product, and as excited about it as we are. We try to offer products of the highest quality that satisfy even the most demanding requirements. If you are satisfied, it would make us very happy if you chose us again the next time youmake a purchase.

  • We are environmentally conscious, therefore we use special eco-friendly packaging. Please recycle!

  • Recycling and Environmental Protection
    We try to avoid using plastic packaging and film and only use them when they are absolutely necessary to protect the product. So how are we different?

  • Packaging you can Ht, Well, almost. 🙂

  • We use ink made from soybeans as opposed to classic petroleum-based ink.

  • The majority of our packaging is made from 100% recyclable paper.

  • We limit the use of adhesives. If absolutely necessary, we make sure to choose only water-soluble ones.

  • We think globally, which means that we actively search for eco-friendly solutions. We keep an eye on trending technology and place findings of the scientific community into practice.

  • We don’tjusttry to meet quotas and mandates, we aim to exceed them.

TECHNICAL PARAMETERS

Input voltage DC 12V/3.5A
Wireless ch;uging power 1 SV/1 A: 9V/1.67 A; 12Vl1.25A(max)
Wireless charging power 2 SV/1 A; 9V/1.67 A; 12V/1.25A(max)
Maximum power 15W+15W
Charging distance (wireless charging) 70%
Dimensions 179.6 x 80 x 6.2 mm
Weight 173g  Sg

OVERVIEW

alza-power-APW-WC250B-Wireless-Charger-
FIG-1

  1. Phone charging area for
  2. phones USB-C Input port

INSTRUCTIONS

Plug the USB-C cable connector into the USB-C input port on the bade. of the charger. Plug the USB-C connector into the AC adapter and plug it into a properly grounded power outlet.
Phone wireless charging
You can charge two phones at once using this wireless charger. Place the phone on the charg­ing pad. The charging process starts automatically. LED indicator starts flashing. Once the LED stops flashing and lights up, the device is fully charged.
Cleaning
Keep the wireless charger clean. Always make sure that the USB cable is disconnected from the charger before cleaning.
Use only a dry, clean doth for cleaning. Do not use harsh cleaners, solvents, gasoline or other similar substances. Never wash the charger with water or immerse it in water.

SAFETY INFORMATION

  • Read the safety and operating instructions.

  • Failure to observe the safety and operating instructions can endanger people or damage the device. And it may void your warranty.

  • This product is only suitable for household use.

  • Keep the product and its accessories away from children.

  • Make sure that the product does not fall, is not damaged, broken or otherwise deformed.

  • Do not expose the product or its accessories to moisture or immerse them in liquids.

  • Do not expose them to dripping or splashing water. Do not place water containers, such as vases,onthem.

  • Do not expose the product or its accessories to direct sunlight. It is forbidden to place sources of open fire on them, such as burning candles.
    The product heats up during charging. This is a normal occurrence. However, if the temper­ature of the product becomes too high, stop using the product and contact an authorized service center.

  • Do not cover the product.

  • Do not disassemble, repair or modify the product. Have all repairs or adjustments carried out by an authorized service center.

  • Do not leave the product unattended while it is in operation.

  • Do not place any metal objects on the wireless charging pad.

  • Do not throw the product or its accessories in a fire.

  • Do not use or store the product in an environment where flammable or explosive substances or objects that may ignite are stored or used.

  • Make sure the USB cable is disconnected from the product before deaning, moving, or otherwise handling the product.

  • Use only a dry, clean cloth for deaning. Do not use harsh cleaners, solvents, gasoline or other similar substances.

  •  Do not place any objects on the product.

  • Mobile phone covers containing metal can slow down or interrupt the charging process altogether.

  • Do not place bank cards, chips, etc. that operate on the principle of wireless transmission near the product. They could be damaged.

  • A safe distance between the product and implanted medical devices, such as pacemakers, should be maintained.

  • www.alzapower.com

  • Co. Reg. No. 270B2440

  • Alza.cz a.s., Jankovcova 1522/53, 170 00 Prague 7, Czech Republic@2021Alza.cz a.s. All Rights Reserved. 

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals