GARDCO DFL7 Architectural LED Floodlight

Gardco Designer floodlight

LED is an architectural LED flood luminaire with a choice of numerous precision LED optical systems. Each is designed to provide a specific distribution, minimizing stray light. Designer Floodlight LED luminaires outperform comparable HID units, while providing the energy saving benefits of LED technology. The luminaires feature integral LED thermal fins to provide the thermal control so vital to LED system performance and life.

• Project:
• Location:
• Cat.No:
• Type:
• Lumens:
• Qty:
• Notes:

Ordering guide

example : DFL7-A33-32L-900-NW-G2-UNV-DGY-SP2

Prefix| Distribution| Number of LEDS| Drive Current| Color Temperature| Voltage| Finish| Options
---|---|---|---|---|---|---|---
DFL7

Designer Floodlight LED 7″ with Standard Flat Door

DFC7

Designer Floodlight LED 7″ with Standard Cutoff Hood

| SP **** Spot

(12° round)

(NEMA 2×2)

RSP Rectangular Spot

(NEMA 3×3)

RM Rectangular Medium Flood (NEMA 7×4)

RN

Rectangular

Narrow

A33 Flood (NEMA 7×5)

Asymmetric 33° Flood (NEMA 6×5)

| 16L 16 LEDS| 350 350mA

530 530mA 700 700mA 900 900mA 1A 1 Amp 1.2A 1.2 Amp

| CW-G2 Cool White

5000K, 70 CRI

Generation 2

NW-G2 Neutral White

4000K, 70 CRI

Generation 2

WW-G2 Warm White

3000K, 70 CRI

Generation 2

| UNV 120-277V

(50/60Hz)

HVU 347-480V

(50/60Hz)

120 120V

208 208V

240 240V

277 277V

347 347V

480 480V

| Textured

BK **** Black

WH White

BZ **** Bronze

DGY Dark Gray

MGY Medium Gray

Customer specified

RAL Specify optional color or RAL

(ex: OC-LGP or OC-RAL7024)

CC Custom color

(Must supply color chip for required factory quote)

| none Leave blank

DD 4 0-10V Dimming Driver (controls by others)

PCB 1,4 Photocontrol Button

PSO 3 Offset Polycarbonate Flat Shield

ESB Extended Splice Box (can be used with all Mounting Accessories)

WG 2 Wire Guard

Fusing

none Leave blank

F1 1 **** Single

(120, 277, 347VAC)

F2 1 Double

(208, 240, 480VAC)

F3 1 **** Canadian Double Pull (208, 240, 480VAC)

Surge Protection

blank 10kV / 10kA (standard)

SP2 20kV / 10kA (option)

32L 32 LEDS| 350 350mA

530 530mA 700 700mA 900 900mA

1. Must specify applicable specific input voltage, not available with UNV or HVU. PCB only available with 120V, 208V, 240V, 277V.
2. WG not Available with PSO option. Field Installable
3. Additional flat Polycarbonate shield. PSO not available with WG option. Field installable.
4. Choose either DD or PCB. For DD the 0-10V dimming wires exit the luminaire for dimming controls by others.

Mounting Accessories 1

(order separately, field installed, specify finish at placeholder F) Leave blank (no Mounting option; Floodlight fits directly on 1-1/2″ (1.9″ or 48.3mm O.D.) rigid conduit)

• C RIGID CONDUIT MT (F)
  Stub-up Rigid Conduit Mount. For direct mounting to (2) 1/2″ (1.27cm) or 3/4″ (1.91cm) rigid conduit such as GRC Galvanized Rigid Steel Conduit, IMC Intermediate Metal Conduit, etc. No j-box required. Must use factory supplied mounting insert when setting stub-ups.

• J J-BOX MT (F)
  J-Box Mount. For mounting onto weather-proof J-box (by others)

• W WALL/CEIL. MT (F)
  Wall/Ceiling Canopy Mount. For mounting over (not to) a 4″ recessed outlet box. When mounted on vertical surface, provides vertical aiming from straight down to 100° up from nadir. When mounted on a vertical surface, long axis of luminaire must be horizontal (+/-30°). Mounts directly to wall or ceiling. The surface structure must be suitable to support the luminaire. Only suitable for use on non-combustable surfaces.

• WMB WALL MT BULLHORN (F)
  Wall Mount Bullhorn. For mounting over (not to) a 4″ (10.16cm) recessed outlet box. Provides full axial 180° vertical and 358° rotational aiming. Mounts direct to wall. Surface structure must be suitable to support the assembly. Outer end of WMB must be in the “straight up” position, as shown in diagram on page 3. Luminaire mounts with the knuckle below the body of the luminaire only.

• W90 WALL ARM MT (F)
  Wall Arm Mount. For mounting over (not to) a 4″ (10.16cm) recessed outlet box. Provides full axial 180° vertical and 358° rotational aiming range. Mounts direct to wall. Surface structure must be suitable to support the luminaire. When mounted in wet locations, luminaire must be mounted as shown in diagrams on page 3. In damp or dry locations, arm assembly may be inverted.

Consult Signify to confirm whether specific accessories are BAA-compliant.

Additional Mounting Accessories 1
(order separately, field installed, specify finish at placeholder F)

• ST 18″ STANCHION (F)
  Stanchion Mount. 18″ (45.72cm) high stanchion for in-ground concrete burial mounting.

• ST/SM 18″ (F)
  Surface Mount Stanchion. For mounting to 18″ (45.72cm)high stanchion pole assembly.

• PTA (F)
  Pole top 2-3/8″ (6.03cm) tenon adapter

• TAB TWIN ARM BRKT (F)
  Twin arm bracket for use with ST, SM, or PTA

• PT2 DUAL HEAD ADPTR (F)
  Pole top 2-3/8″ (6.03cm) tenon adapter for twin back to back luminaire mounting.

LED Wattage and Lumen Values – 3000K

Ordering Codes

| ****

Total LEDs

| ****

LED

Current

(mA)

| Color Temp. (K)| Avgerage System Wattage| SP| RSP| RM| RN| A33
---|---|---|---|---|---|---|---|---|---
Lumen Output| Efficacy

(LPW)

| Lumen Output| Efficacy

(LPW)

| Lumen Output| Efficacy

(LPW)

| Lumen Output| Efficacy

(LPW)

| Lumen Output| Efficacy

(LPW)

DFC7 or DFL7-16L-350-WW-G2| 16| 350| 3000| 20| 2,747| 137| 2,487| 124| 2,550| 128| 2,574| 129| 2,637| 132
DFC7 or DFL7-16L-530-WW-G2| 16| 530| 3000| 28| 3,599| 129| 3,258| 116| 3,339| 119| 3,372| 120| 3,453| 123
DFC7 or DFL7-16L-700-WW-G2| 16| 700| 3000| 38| 4,399| 117| 3,983| 106| 4,083| 108| 4,122| 109| 4,223| 112
DFC7 or DFL7-16L-900-WW-G2| 16| 900| 3000| 47| 5,352| 113| 4,846| 102| 4,967| 105| 5,015| 106| 5,138| 108
DFC7 or DFL7-16L-1050-WW-G2| 16| 1050| 3000| 55| 6,066| 109| 5,492| 99| 5,629| 101| 5,684| 102| 5,823| 105
DFC7 or DFL7-16L-1200-WW-G2| 16| 1200| 3000| 62| 6,760| 109| 6,120| 99| 6,274| 101| 6,335| 102| 6,489| 104
DFC7 or DFL7-32L-350-WW-G2| 32| 350| 3000| 36| 5,463| 152| 4,946| 137| 5,070| 141| 5,119| 142| 5,243| 146
DFC7 or DFL7-32L-530-WW-G2| 32| 530| 3000| 54| 7,220| 134| 6,537| 121| 6,700| 124| 6,765| 125| 6,930| 128
DFC7 or DFL7-32L-700-WW-G2| 32| 700| 3000| 71| 8,880| 126| 8,039| 114| 8,240| 117| 8,320| 118| 8,522| 121
DFC7 or DFL7-32L-900-WW-G2| 32| 900| 3000| 90| 10,832| 120| 9,807| 108| 10,052| 111| 10,150| 112| 10,397| 115

LED Wattage and Lumen Values – 4000K

Ordering Codes

| ****

Total LEDs

| ****

LED

Current

(mA)

| Color Temp. (K)| Avgerage System Wattage| SP| RSP| RM| RN| A33
---|---|---|---|---|---|---|---|---|---
Lumen Output| Efficacy

(LPW)

| Lumen Output| Efficacy

(LPW)

| Lumen Output| Efficacy

(LPW)

| Lumen Output| Efficacy

(LPW)

| Lumen Output| Efficacy

(LPW)

DFC7 or DFL7-16L-350-NW-G2| 16| 350| 4000| 20| 2,892| 145| 2,618| 131| 2,684| 134| 2,709| 135| 2,776| 139
DFC7 or DFL7-16L-530-NW-G2| 16| 530| 4000| 28| 3,788| 135| 3,429| 122| 3,515| 126| 3,549| 127| 3,635| 130
DFC7 or DFL7-16L-700-NW-G2| 16| 700| 4000| 38| 4,631| 123| 4,193| 111| 4,298| 114| 4,339| 115| 4,445| 118
DFC7 or DFL7-16L-900-NW-G2| 16| 900| 4000| 47| 5,634| 119| 5,101| 108| 5,228| 110| 5,279| 111| 5,408| 114
DFC7 or DFL7-16L-1050-NW-G2| 16| 1050| 4000| 55| 6,385| 115| 5,781| 104| 5,925| 107| 5,983| 108| 6,129| 110
DFC7 or DFL7-16L-1200-NW-G2| 16| 1200| 4000| 62| 7,116| 115| 6,442| 104| 6,604| 106| 6,668| 107| 6,830| 110
DFC7 or DFL7-32L-350-NW-G2| 32| 350| 4000| 36| 5,751| 160| 5,206| 145| 5,337| 148| 5,388| 150| 5,519| 153
DFC7 or DFL7-32L-530-NW-G2| 32| 530| 4000| 54| 7,600| 141| 6,881| 127| 7,053| 131| 7,121| 132| 7,295| 135
DFC7 or DFL7-32L-700-NW-G2| 32| 700| 4000| 71| 9,347| 132| 8,462| 120| 8,674| 123| 8,758| 124| 8,971| 127
DFC7 or DFL7-32L-900-NW-G2| 32| 900| 4000| 90| 11,402| 126| 10,323| 114| 10,581| 117| 10,684| 118| 10,944| 121

LED Wattage and Lumen Values – 5000K

Ordering Codes

| ****

Total LEDs

| ****

LED

Current

(mA)

| Color Temp. (K)| Avgerage System Wattage| SP| RSP| RM| RN| A33
---|---|---|---|---|---|---|---|---|---
Lumen Output| Efficacy

(LPW)

| Lumen Output| Efficacy

(LPW)

| Lumen Output| Efficacy

(LPW)

| Lumen Output| Efficacy

(LPW)

| Lumen Output| Efficacy

(LPW)

DFC7 or DFL7-16L-350-CW-G2| 16| 350| 5000| 20| 2,892| 145| 2,618| 131| 2,684| 134| 2,709| 135| 2,776| 139
DFC7 or DFL7-16L-530-CW-G2| 16| 530| 5000| 28| 3,788| 135| 3,429| 122| 3,515| 126| 3,549| 127| 3,635| 130
DFC7 or DFL7-16L-700-CW-G2| 16| 700| 5000| 38| 4,631| 123| 4,193| 111| 4,298| 114| 4,339| 115| 4,445| 118
DFC7 or DFL7-16L-900-CW-G2| 16| 900| 5000| 47| 5,634| 119| 5,101| 108| 5,228| 110| 5,279| 111| 5,408| 114
DFC7 or DFL7-16L-1050-CW-G2| 16| 1050| 5000| 55| 6,385| 115| 5,781| 104| 5,925| 107| 5,983| 108| 6,129| 110
DFC7 or DFL7-16L-1200-CW-G2| 16| 1200| 5000| 62| 7,116| 115| 6,442| 104| 6,604| 106| 6,668| 107| 6,830| 110
DFC7 or DFL7-32L-350-CW-G2| 32| 350| 5000| 36| 5,751| 160| 5,206| 145| 5,337| 148| 5,388| 150| 5,519| 153
DFC7 or DFL7-32L-530-CW-G2| 32| 530| 5000| 54| 7,600| 141| 6,881| 127| 7,053| 131| 7,121| 132| 7,295| 135
DFC7 or DFL7-32L-700-CW-G2| 32| 700| 5000| 71| 9,347| 132| 8,462| 120| 8,674| 123| 8,758| 124| 8,971| 127
DFC7 or DFL7-32L-900-CW-G2| 32| 900| 5000| 90| 11,402| 126| 10,323| 114| 10,581| 117| 10,684| 118| 10,944| 121

Values from photometric tests performed in accordance with IESNA LM-79 and are representative of the configurations shown. Actual performance may vary due to installation and environmental variables, LED and driver tolerances, and field measurement considerations. It is highly recommended to confirm performance with a photometric layout.

NOTE: Some data may be scaled based on tests of similar (but not identical) luminaires. Contact factory for configurations not shown.

Predicted Lumen Depreciation Data

Ambient Temperature °C| System Current| Calculated L70hrs| L70 per TM21| Lumen Maintenance @ 60,000hrs
---|---|---|---|---
25 °C| 1200 mA| >100,000| >120,000| 98%

Predicted performance derived from LED manufacturer’s data and engineering design estimates, based on IESNA LM-80 methodology. Actual experience may vary due to field application conditions.L70 is the predicted time when LED performance depreciates to 70% of initial lumen output. Calculated per IESNA TM21-11. Published L70 hours limited to 6 times actual LED test hours.

Dimensions

Specifications

Housing and Heat Sink
Single piece low copper die cast Aluminum alloy (A360) for a high resistance to corrosion. Housing also acts as heat sink, designed to ensure high efficacy and superior cooling by natural convection. Air flow pattern always close to LEDs and driver optimizing their efficiency and life. Does not use any cooling device with moving parts (only passive cooling).

Door/Lens Assembly
A heat and impact resistant 1/8″ (.3175cm) tempered glass lens and one piece silicone gasket are mechanically secured to door frame providing an IP66 seal. DFL7 luminaires feature a flat door and lens assembly. DFC7 luminaires include an integral cutoff hood door and lens assembly providing additional shielding from source glare.

IP66 Rating
IP66 rated luminaire in all aiming positions including up tilt aiming per ANSI C136.37 with seal around entire perimeter of the lens and electrical / driver compartment.

Knuckle
Up tilt aiming and down tilt aiming possible with all of the mounting accessories. cULus Listed as suitable for mounting within 4′ or 1.2m of the ground. Low copper die cast Aluminum alloy (A360) for high resistance to corrosion. Integral cULus recognizedWet Location splice compartment for field wiring with seal around entire perimeter. A single captive 3/16″ (.48cm) stainless steel allen head bolt and stainless steel nut securely lock the integral interlocking aiming teeth in 5˚ increments.

Splice Compartment Capacity/Standard Units/Luminaires w/ Extended Splice Box (ESB) option

• 12 AWG Conductors 5 9

• 10 AWG Conductors 3 7

Integrated Features

Please note that these integrated features always come with this luminaire standard at no additional cost. 0-10V dimming driver included as standard, dimming leads pre-wired to PCB controls option when selected. SP1: Surge protection device tested in accordancewith ANSI/IEEE C62.45 per ANSI/IEEE C62.41.2 Scenario I Category C High Exposure 10kV/10kA waveforms for Line- Ground, Line-Neutral and Neutral- Ground. Enhanced surge protection device SP2 20kV/10kA available as an option. Surge protection device wired in parallel so that if it fails open the luminaire will remain lit/powered on.

Light Engine
Composed of 3 main components: LED Module / Optical System / Driver. Electrical components are RoHS compliant. LEDs tested by ISO 17025-2005 accredited lab in accordance with IESNA LM-80 guidelines, extrapolations in accordance with IESNA TM-21. Metal core board ensures greater heat transfer and longer lifespan.

LED Module
Composed of high performance white LEDs. Color temperature as per ANSI/NEMA bin 3000K nominal (3045K +/-175K) or 4000K nominal (3985K +/- 275K) or 5000K nominal (5029K +/- 283K), all CRI 70 min. / 75 typical.

Optical System
Composed of high performance UV stabilized optical grade polymer refractor lenses to achieve desired distribution optimized to get maximum spacing, target lumens and a superior lighting uniformity. Performance shall be tested per LM-63, LM-79 and TM-15 (IESNA) certifying its photometric performance.

Driver
High power factor of 90% min. Electronic driver, operating range 50/60 Hz. Auto adjusting universal voltage input from 120 to 277 or 347 to 480 VAC rated for both application line to line or line to neutral, ClassI, THD of 20% max. The current supplying the LEDs will be reduced by the driver if the driver experiences internal overheating as a protection to the LEDs and the electrical components. Output is protected from short circuits, voltage overload and current overload. Automatic recovery after correction. Standard built in driver surge protection of 2.5kV (min). Driver enables setting LED drive current to meet your specific total wattage consumption, lumen output and/or efficacy needs – ETO Specials, contact factory.

Hardware and Seals
All exposed screws shall be stainless and/or corrosion resistant and captive. All seals and sealing devices are made and/or lined with EPDM and/or silicone and/or rubber.

Wiring

16 AWG wires from the primary circuit, located inside the knuckle splice

compartment for field wiring. Due to the inrush current that occurs with electronic drivers, recommend using a time delay or slow blow fuse to avoid unnecessary and unwanted fuse blowing (false tripping) that can occur with fast acting fuses.

Finish
Five standard textured colors. RAL and custom color matching available – must contact factory prior to ordering, these are ETO Specials. Color in accordance with the AAMA 2604 standard. Application of polyester powder coat paint (2.5 mils/62.5 microns) with ± 1 mils/24 microns of tolerance. The thermosetting resins provides a discoloration resistant finish in accordance with the ASTM D2244 standard, as well as luster retention in keeping with the ASTM D523 standard and humidity proof in accordance with the ASTM D2247 standard.

LED Products Manufacturing Standard
The electronic components sensitive to electrostatic discharge (ESD) such as light emitting diodes (LEDs) are assembled in compliance with EC61340-5-1 and ANSI/ESD S20.20 standards so as to eliminate ESD events that could decrease the useful life of the product.

Luminaire Useful Life
Refer to IES files for energy consumption and delivered lumens for each option. Based on ISTMT in situ thermal testing in accordance with UL1598 and UL8750, Signify System Reliability Tool, Advance driver data and LED manufacturer LM-80/TM-21 data, expected to reach 100,000+ hours with L70 lumen maintenance @  25°C. Luminaire Useful Life accounts for LED lumenmaintenance AND all of these additional factors including: LED life, driver life, PCB substrate, solder joints, on/off cycles, burning hours and corrosion.

Certifications and Compliance
cULus Listed for Canada and USA, per UL1598 and UL8750, including suitable for mounting within 4′ or 1.2m of the ground. Configurations are DesignLights Consortium qualified, consult DLC QPL Qualified Products List for more details. Luminaire complies with or exceeds the following ANSI C136 standards: .2, .3, .10, .15, .21, .22, .24, .25, .31, .32, .37, .41. Entire luminaire is rated for operation in ambient temperature of -40°C (-40°F) up to +40°C (+104°F).

Limited Warranty

5-year limited warranty. See signify.com/warranties for details and restrictions.

Buy American Act of 1933 (BAA)

This product is manufactured in one of our US factories and, as of the date of this document, this product was considered a commercially available off-the- shelf
(COTS) item meeting the requirements of the BAA. This BAA designation hereunder does not address (i) the applicability of, or availability of a waiver under, the Trade Agreements Act, or (ii) the “Buy America” domestic content requirements imposed on states, localities, and other non-federal entities as a condition of receiving funds administered by the Department of Transportation or other federal agencies. Prior to ordering, please visit www.signify.com/baa to view a current list of BAA-compliant products to confirm this product’s current compliance.

© 2022 Signify Holding. All rights reserved. The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify.

Signify North America Corporation 400 Crossing Blvd, Suite 600 Bridgewater, NJ 08807 Telephone 855-486-2216

Signify Canada Ltd. 281 Hillmount Road, Markham, ON, Canada L6C 2S3 Telephone 800-668-9008 www.gardcolighting.com

References

• cat.no
• Outdoor architectural solutions lighting | Gardco | Signify
• Buy American Act (BAA) | Signify

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>