ROCCAT Kone XP 3D Lighting 15 Button Gaming Mouse User Guide

: June 9, 2024
: ROCCAT

Table of Contents

PACKAGE CONTAINS
DEFAULT BUTTON ASSIGNMENT
INSTRUCTIONS
Disposal information
Technical support
TECHNICAL FACTS
FCC CAUTION:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ROCCAT Kone XP 3D Lighting 15 Button Gaming Mouse User Guide

PACKAGE CONTAINS

Please remove the blue protection film from the mouse feet before use

DEFAULT BUTTON ASSIGNMENT

STANDARD

Left mouse button
Right mouse button
Universal scroll
Tilt left
Tilt right
Scroll up
Scroll down
Key press “R”
Key press “G”
IE forward
IE back
DPI up
DPI down
Easy-Shift[+]™
Profile Button / Cycle Profiles

EASY-SHIFT [+]TM
14+1 = Left mouse button
14+2 = Right mouse button
14+3 = Multimedia play/pause
14+4 = Previous media track
14+5 = Next media track
14+6 = Volume up
14+7 = Volume down
14+8 = Key press “1”
14+9 = Key press “2”
14+10 = Key press “3”
14+11 = Key press “4”
14+12 = Key press “5”
14+13 = Key press “6”
14+14 = Disabled
14+15 = Not assigned

INSTRUCTIONS

Plug the USB connector into any free USB port on your PC or laptop.
Navigate to www.roccat.com/downloads and download the latest driver.
Complete the installation to get access to all software features and setup

Disposal information

The crossed-out wheelie-bin symbol means that you must not dispose of this product toge- ther with unsorted household waste. As electrical devices can contain harmful substances which may cause environmental damage or harm to your health if not disposed of correctly, please dispose of these products separately. As the end user, you are required by law to dispose of used electrical equipment at an official recycling point. For information about local recycling points, contact your local authority, civic amenity site or the business where you purchased this product. By disposing of electrical products at an official recycling point, you are doing your bit to ensure equipment is recycled correctly and professionally, and our environment is protected.
When purchasing a new product, the retailer will let you hand in old products and dispose of them free of charge provided the product you are handing in is of a similar type and has the same functions as the product you are purchasing.You can hand in small used electrical and electronic equipment (measuring no longer than 25 cm on any one side) for free and with no obligation to purchase a similar product at electrical and electronic retail outlets with sales areas larger than 400m² or at nearby recycling points designated by the retail outlet. Wherever possible, remove any batteries before disposing of the device. Under law, as a user you face the risk of penalties if you dispose of devices and batteries illegally.

Technical support

Having technical problems with this product?
Get in touch with our Support team – the quickest way is via our website: www.roccat.com/support
Please keep this information for later reference.

TECHNICAL FACTS

TECH SPECS KONE XP
ROCCAT® Titan Switch Optical
100 million click life-cycle
ROCCAT® Owl-Eye 19K optical gaming sensor (based on PixArt PAW3370)
Adjustable lift-off distance
50g acceleration
On-board memory
1.8m Phantom Flex™ cable
104g weight

SYSTEM REQUIREMENTS

Windows® 7 and above (software support)
USB 2.0 (or higher)
Internet connection

Should you need assistance …
Our support team is ready to help you with any technical questions.
Just send an e-mail to support@roccat.com or visit our website at:
WWW.ROCCAT.COM/SUPPORT

FCC CAUTION:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation

GENERAL SAFETY GUIDELINES AND INTENDED USE

Do not open or modify the product.
Not approved changes or modifications may void the operation authority and/or warranty.
In case of trouble or doubt, contact us immediately.
Keep the product away from fire/water/humidity/temperature extremes.
Only use as intended with a compliant PC and connector part.
Improper or incorrect use of the product or use of the product for purposes not recommended by the manufacturer void the liability and/or warranty.
Don‘t look into the light beam on bottom of the mouse.

VOYETRA TURTLE BEACH, INC. | 44 SOUTH BROADWAY, 4TH FLOOR, WHITE PLAINS NY 10601, USA

© 2022 Voyetra Turtle Beach, Inc. All rights reserved. Any product names mentioned in this manual may be trademarks or registered trademarks and are the property of their respective owners. Information contained herein is subject to change without notice. Voyetra Turtle Beach, Inc. shall not be made liable for any errors that may appear in this manual. This publication or parts of it may not be reproduced without the express consent of the publisher. ROCCAT® is a Turtle Beach Brand. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for anyother reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or r placed if the goods fail to be of acceptable quality and the failure does not amount to a major failure

Class B Interference Statement
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Please use your product’s serial number (located on the bottom label)