naxa NDS-4505 Portable Dual 4 Inch Bluetooth Party User Manual

naxa NDS-4505 Portable Dual 4 Inch Bluetooth Party

Bluetooth@ Double Portable Speaker 10.16 cm (4″) for Party with Light Rhythmic of Multicolored Radiance NDS-4505

WARNINGS

CAUTION: TO REDUCE THE RISK OF DO NOT REMOVE THE
THIS ELECTRIC COVER), INSIDE PRODUCT THERE ARE NO PARTS THAT THE USER CAN GIVE YOU SERVICE, GO TO A AUTHORIZED SERVICE CENTER 0 WITH SHOCK DECK (EITHER OF QUALIFIED PERSONNEL.

• The symbol of lightning with a point of arrow inside a triangle, is designed to warn the user of “voltages Hazardous” not isolated within the Product which may be of sufficient magnitude to constitute a risk of fire or shock electric for people.
• The exclamation point within a triangle, is to alert the user of the presence of important instructions operation, maintenance and service found within this instructable

Read the instructions

• Keep the instructions.
• Pay attention to all warnings.
• Follow the instructions.
• WARNING. To prevent risk of fire or electric shock, do not expose this product to dripping or splashes of water or other liquids, to rain or humidity. Do not store or operate this product near water or other liquids.
• Clean only with a soft, clean, dry cloth.
• Do not store or operate this product near any heat sources such as radiators, heat registers, stoves or other products that produce heat (including amplifiers). Keep this product in a place with adequate ventilation.
• Do not defeat the safety feature of a polarized plug or plug with a grounding terminal, this
• It is a safety measure. A polarized plug has two blades with one more blade wide than the other. A grounding plug has two terminals with a third terminal grounded. If the plug does not go all the way into the outlet, try inserting it back turning it over again: if it does not fit completely, consult an electrician or qualified personnel to replace the outdated outlet.
• The power cord should be routed so that it is not likely to be stepped on or press it on the places where it will be placed or against the Product itself. Pay attention particular at cord, plug, convenience receptacle, and the point where they exit from the product.
• Unplug the product from the electrical outlet during lightning storms or when it will not be used by a long period of time to protect it.
• Keep the product turned off when connecting any device to it.
• After finishing the installation and connections, adjust the product and all the equipment connected to a low volume level. Once they are all connected and powered up, increase the level of volume slowly until desired comfortable volume is achieved.
• Before placing, installing, mounting or suspending any product, please inspect all equipment such as suspension, cabinet, transducers, supports and associated equipment.
• Any failed, corroded, deformed, or non-rated loaded component can reduce strength, installation placement and layout. Any of these conditions can reduce safety installation and should be corrected immediately. Use only equipment suitable for the installation load conditions to reduce any possibility of overloading, which can create risk of accident. Never exceed the capacity of materials or equipment.
• Consult qualified personnel to install the product and ensure that it complies with all local, regional and national regulations regarding safety, which regulations are properly understood and followed.
• All service to the product must be performed by qualified personnel. The service is required when the product has been damaged in any way, if the power plug or power cord is damaged, if liquid has been spilled or objects have fallen into the product, if the product hasbeen exposed to rain or water, if the product does not operate properly, if the product has been dropped or hit or if the cover is damaged, if the product exhibits changes in its operation.

CHARGE THE BATTERY FULLY BEFORE USING THE PRODUCT FOR THE FIRST TIME TO OPTIMIZE THE OPERATION AND LIFETIME OF THE BATTERY

CONTENT IN THE PACKAGING

• Please take a few moments to make sure you have everything listed below.
• Although we do our best to make sure every Naxa device is fine packed and sealed, we know that a lot can happen during packing and shipping.
• If any component is missing, contact the supplier immediately for assistance immediate.
• Portable Bluetooth@ Speaker NDS-4505 charging cable
• Operation manual

CHARACTERISTICS

• Dual 4″ full frequency horn fills the room with high quality audio with ease
• Bluetooth® functionality allows you to wirelessly stream your favorite music with high-quality audio to the speaker from a Bluetooth® enabled device.
• Start the party off right with multiple lighting schemes and effects that will leave a lasting impression on friends and family
• Become the star of the show, unleash your inner musician star with friends and family when singing Karaoke thanks to the microphone input.
• Colorful light effects that dance in sync with the music and make you want to dance too.
• Connect the speaker to other speakers wirelessly and enjoy your tunes favorites from one room to another through the Tws function. The TWS function allows synchronize the speakers at a distance of 10 meters maximum, free of obstacles.
• Making sure the fun never stops by maintaining the battery of the horn fully charged with the included charging cable.
• The speaker allows the reproduction of your favorite music through memories of external storage such as a USB memory or memory card through the built-in USB port or memory card slot.
• The speaker allows the wired connection of audio playback devices via an audio cable connected to the audio output of the external device and to the 0 3.5 mm speaker audio input (Auxiliary Input “AUX IN”)
• Tune in to your favorite radio stations through the built-in FM Radio function.
• High power horn that reproduces a smooth, clear, dynamic and incomparable sound.
• The built-in rechargeable battery ensures that the fun continues with your long-lasting and fast charging capabilities.

DESCRIPTION OF PARTS

1. MODE: Press to select the operation mode of Bluetooth®, FM Radio,

2. USB Memory, Memory Card, Auxiliary Input. Press and hold to change the light effector, press twice to turn multicolor light On or Off.

3. KA: In USB Memory, Memory Card, Bluetooth® and FM Radio modes, press to skip to the previous track or station.

4. ITWS/BT: In USB Memory, Memory Card and Bluetooth@ modes, press to Start, Pause or Resume Playback. In Bluetooth® mode, press and hold for 2 seconds to enter pairing mode; double press to Activate

5. Deactivate the TWS function. In FM Radio mode, press and hold to start the
   Automatic scanning and storage of stations with strong signal. press for disable audio output (mute) in FM Radio and Auxiliary Input modes.

6. In USB Memory, Memory Card, Bluetooth® and FM Radio modes, press to skip to the next track or station.

7. TF: Memory card slot. Play audio files in MP3 format.

8. CHARGE: Battery charge indicator

9. OFF/ON: Power switch to turn the horn “ON” or “OFF”.

10. USB/5V: Micro USB input connector for 5 Vdc power. Insert charging cable included to connect the speaker to the power source to charge the rechargeable battery internal.

11. MIC: 6.5mm Wired Microphone Input Jack

12. AUX IN: Ø 3.5 mm Auxiliary Input Connector Screen

13. USB: USB memory port. Play audio files in MP3 format.

14. VOL-NOL: Volume control.

PAIRING TO A BLUETOOTH® DEVICE

Use Bluetooth® mode to wirelessly stream music from a device
Bluetooth@ paired (for example, Smartphone or Tablet) to the speaker. The device
Bluetooth must be paired with the speaker before using them together for the first time.

1. Make sure that the Bluetooth® function is enabled on the external device and that the external device is close to the horn before attempting to sync.
2. Turn on the speaker and select Bluetooth® mode by pressing “/MODE”. The Horn automatically enters pairing mode.
3. Use the external Bluetooth@ device to search for nearby Bluetooth® devices (this function is usually found in the Bluetooth® settings menu, refer to the owner’s manual operation of the external Bluetooth® device for more information). The product is identified as “SOUNDPRO NDS4505” in the list of found devices.
   Select “SOUNPRO NDS-4505 in the list of found/available devices. The horn emits a confirmation sound when pairing is successful.

You are now ready to start playing the external Bluetooth® device (for example, Smartphone, Tablet, etc.) wirelessly through the speaker. use the device Bluetooth® connected for song selection, play/pause and volume control.

“TWS” STEREO WIRELESS CONNECTION FUNCTION

The Bluetooth® speaker allows you to enjoy your favorite audio files by playing them in two speakers at the same time thanks to the TWS function. To use the TWS function, perform the

Next steps:

1. Please purchase two Bluetooth® speakers of the same model and pairing name with tws function.

2. Turn on one speaker, pair the speaker to the Bluetooth® device as explained in PAIRING TO A BLUETOOTH® DEVICE.

3. Turn on the second horn, press 2 times “I/TWS/BT”, the horn will make a sound when the speakers are connected via TWS function, now you can hear the Wireless Stereo Transmission (TWS) through the 2 speakers for a listening experience stereo audio
   You are now ready to start playing the external Bluetooth@ device (for example, Smartphone, Tablet, etc.) wirelessly through the speakers. Use the connected Bluetooth® device for song selection, play/pause, and music control volume

4. To disconnect the speakers from the TVWs function, press 2 times “II/TWS/BT” on the first horn. The horn will chirp when the speakers are disconnected. To come back

To connect with Tws function, repeat the above steps.
Note : The TWS function is only for two speakers at the same time. Cannot support more than two speakers per Same time.

MEMORY CARD

The Bluetooth® speaker allows you to enjoy your favorite audio files from your external storage, such as a memory card. To use the Credit Card function memory, perform the following steps:

1. Insert a TF memory card through the memory card slot.
2. Turn on the horn.
3. Press “II/TWS/BT” to Start, Pause or Resume playback. Press “H«” or “Wto skip to the previous or next track.
4. Rotate the volume control to adjust the volume to the desired level.

Grades:

When you insert a memory card into the memory card slot, the Speaker Bluetooth® automatically switches to memory card mode and starts playing MP3 audio files from the memory card.
You can also switch to memory card mode by pressing “*/MODE”
It is recommended to insert/remove the memory card while the speaker is off, in order to prevent damage to the speaker and memory card

PEN DRIVE
The Bluetooth® speaker allows you to enjoy your favorite audio files from your external storage, such as a USB flash drive. To use the USB memory function, perform the following steps:

1. Insert a USB stick through the USB port.
2. Turn on the horn.
3. Press “II/TWS/BT” to Start, Pause or Resume playback. Press “kt” or Wto skip to the previous or next track.
4. Rotate the volume control to adjust the volume to the desired level Grades

NOTES

• When you insert a USB flash drive into the USB port, the Bluetooth® Speaker changes automatically to USB memory mode and start playing the audio files MP3 from USB stick.
• You can also switch to USB memory mode by pressing “o/MODE
• It is recommended to insert/remove the USB memory while the speaker is off, to avoid damage to the speaker and USB memory.

FM RADIO
The Bluetooth® speaker allows you to enjoy local FM Radio stations. To use the function FM Radio, perform the following steps.

1. With the speaker on, press “/MODE” to select FM Radio mode.
2. Press and hold “/TWS/BT” to start scanning and storing the radio stations with signal in the memory automatically.
3. Once the scanning and storing of the stations is complete, press “w” or ” to skip to the previous or next station.
4. Rotate the volume control to adjust the volume to the desired level.

Grades:

During station scanning, the Bluetooth® Speaker stores the stations with signal found in memory. The scanning procedure takes several minutes to complete and must not be interrupted.

AUXILIARY INPUT

The Bluetooth® Speaker allows you to enjoy your favorite audio files played from external audio devices that do not have the Bluetooth® function through the auxiliary input.

To use the Auxiliary Input function, perform the following steps

1. Insert the audio cable (not included) into the auxiliary input connector “AUX IN” on the horn.
2. Insert the other end of the audio cable into the audio-out or audio-out jack. headphones of the desired external device.

Note : When inserting an external audio device to the speaker’s “AUX IN” input, the speaker automatically switches to Auxiliary Input mode. You can also switch to sleep mode Auxiliary Input by pressing “o/MODE

BATTERY CHARGE

The horn is powered by an internal rechargeable battery. Before operating the horn for the first time,
Fully charge the battery to ensure optimum performance and battery life.
When the battery charge is low, please charge the battery immediately. with load of low battery the horn volume automatically decreases to 70%.
Use the included charging cable to connect the speaker to the power source to recharge.

1. bat Insert the micro USB connector of the charging cable into the “USB/5V” connector of the speaker. Then, Insert the USB connector of the charging cable to the USB connector of the power adapter. power cord (not included) or other power source, such as the USB port of a computer (computer must be turned on) or to the UsB port of a USB Charger.
2. The charge indicator led lights up when the battery is charging. The LED indicator charging turns off when the battery is fully charged.

Grades:

• To prolong the life of the battery, do not recharge it for more than the specified time.
• The battery used in the speaker is not user replaceable.
• Battery operating time varies depending on use, loud music with sounds
• Bass consume more energy.
• The battery used in the horn may present a risk of fire or chemical burns if these are operated improperly.
• Do not leave the battery in a place exposed to direct sunlight or inside a car with the windows closed. Do not disassemble, incinerate or heat batteries.
• Do not connect the horn to a power source other than the one specified in this manual or on the marking label, otherwise it may create a risk of fire or electric shock.
• If the speaker is not used for a long period of time, please charge the battery at least once a month for 12 hours; otherwise, the battery may be damaged.
• Dispose of the battery properly to avoid environmental damage.

SPECIFICATIONS

1. Horn 4″ speaker x 2
2. Wireless connection Bluetooth @
3. Wireless connection function tws
4. PMPO audio output power 1000W x2
5. Tickets USB port, Memory card slot, Input for Microphone, Auxiliary Input
6. Tuner FM Radio
7. light effects Multicolor Glow Rhythmic Light
8. Internal rechargeable battery 3.7 Vdc 2 400 mAh Lithium Battery
9. Audio file format MP3
10. play time Up to 2 hours (playtime varies depending on the volume level and type of music played plays)

The specifications and design of this product are subject to change without prior notice for improvements of the same

FCC NOTICE

This product complies with part 15 of the FCC Rules. The operation of this product is subject to the following two conditions: (1) this product may not cause interference harmful, and (2) this product must accept any interference, including interference that may cause the unwanted operation.
Note : This product has been tested and found to comply with the limits for a Class B digital equipment, in accordance with Part 15 of the CC Rules. These limits are designed to allow a Reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in an installation particular. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the product and the receiver.
• Connect the equipment into an outlet on a circuit different from that of the receiver.
• Consult your provider or a Radio and television technician.

CAUTION ON MODIFICATIONS
Any changes or modifications not expressly approved by the manufacturer of this product you may void ownership to operate the product.

INDICATIONS ON THE ENVIRONMENT

At the end of the useful life of this product, it should not be disposed of in the trash. household to avoid damage to the environment, if necessary go to the waste center solids of your locality. Proper waste separation helps prevent possible negative effects on human health and the environment and promotes the recycling of materials that make up the product. Find out in your locality about the organisms of disposal of this type of waste.

MEDIUM

If you have problems with the operation of the speaker, please refer to the instructions in this manual, as well as the latest news, recommendations and documentation that you can find at our website www.naxa.com. If you need further assistance, please contact the support center. authorized service or authorized technical support.
http://www.naxa.com/supportcenter
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>