Angry Miao CYBERBOARD Terminal Keyboard User Manual

Angry Miao CYBERBOARD Terminal Keyboard

Specifications

Green
Plate mounting style| Top Mount
Drive| No extra drivers, N-key rollover
Windows PC| Support DIY Web interface in Windows
Connections| Hot Swappable
Connections| Bluetooth 5.0 and USB switchable，tap the bottom switch to switch mode (supports C to C,Bluetooth 5.0 only availble on Windows 8.0+)
Capslock hint| The indicator light is located between the numbers 6 and 7
Battery status| Fn+F12, display power status When the power is less than 5%, power module will turn red until the power is off. (Press Fn+F11 to turn off the screen)
USB Port| USB3.0，TypeC，supports C to C
Battery| Lithium battery 4000mAh *2
Qi wireless charge| Output power 5W. Wireless charging will turn on when the battery is less than 70%, and it will be turned off when fully charged.”
LED colors| 256 colors
Maximum power dissipation| 2.5W

Tools Required

Installation

1. Remove the screws of the back

2. Note: please make sure open from the bottom to avoid damaging the cable
   

3. Remove the FPC cables and RF cables, and loosen the screws
   

4. Take out the PCB sets

5. Remove the screws (3mm M2) on the PCB

6. Remove the PCB
   

7. Install the stabilizers in the PCB
   

8. Assemble the PCB, silicone mute mount and plate in order
   Note: please make sure to put on the front side (with logo) of the silicone mute mount and the plate
   

9. Install the switches
   Note: Please install it carefully to prevent deforming the plate or crushing the PCB
   

10. Install the PCB to the upper cover, lock the screws and connect the cables
    Note: Please make sure you connect to the right side.
    

11. Close the back cover
    Note: Closing the the back cover in the wrong direction could damage the cables
    

12. Lock the screws from the back cover and complete the installation
    

Shortcut keys

Media Keys

LED Control

Bluetooth connection

Fn+1| Switch to device 1 in Bluetooth mode, press and hold for 5 seconds until the LED icon starts blinking. The icon will stop flashing if the device paired successfully, and the panel will resumes its previous display
---|---
Fn+2| Switch to device 1 in Bluetooth mode, press and hold for 5 seconds until the LED icon starts blinking. The icon will stop flashing if the device paired successfully, and the panel will resumes its previous display
Fn+3| Switch to device 1 in Bluetooth mode, press and hold for 5 seconds until the LED icon starts blinking. The icon will stop flashing if the device paired successfully, and the panel will resumes its previous display
Switching the device| Press Fn+1/2/3 to switch between different connected devices. 5 seconds after the icon appears, and the panel will resumes its previous display
Standby during Bluetooth mode| After 15 minutes of standby, the LED panel will automatically turn off while the keyboard will keep the connection. Press any key to wake up

How to edit lighting effects

1. Enter diy.angrymiao.com to edit lighting effects and keycap layouts.
2. After finishing editing, generate the config file and download it.
3. Download the Angry Miao loader (windows program) from diy.angrymiao.com. And keep the CYBERBOARD connected to the computer via USB.
4. Double-click to open the Angry Miao loader, select your config file and import (you can directly use the config file shared bothers).
5. Wait patiently until it’s successfully configured.

Anti-counterfeiting

Declaration

In order to protect your rights and shopping experience, please register for anti-counterfeiting as soon as your CYBERBOARD arrives.

Anti-counterfeiting Registration

CYBERBOARD is devoted to providing users with high-quality products. We will provide anti-counterfeiting registration services for CYBERBOARD products starting July 3, 2020. All products purchased from official channels can be registered for anti-counterfeiting.

Please note that all the CYBERBOARD products that you purchased from official channels can be registered at https://verify.angrymiao.com by entering the security code on the back of the product. Each anti-counterfeiting code is unique and can only verify the corresponding item.

If you find that the CYBERBOARD you purchased cannot be registered or the registration fails, please discriminate the authenticity of the product carefully.

After-sales service

Return & Refund Policy

Our policy lasts 72 hours. If the time is due, unfortunately we can’t offer you a refund or exchange.

There are certain situations we can’t offer you a refund or exchange.

• 48 hours have gone by since you received the item.
• Any item not in its original condition, is damaged or missing parts for reasons not due to our error.
• Dislike due to personal preferences.

1. If you need to refund or exchange, please click Contact Us on our website and leave your message. We will contact you within 3 working days.
2. Please contact us first if you want a refund or exchange. We refuse to deal with self returned products.
3. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging. Any missing parts will delay the refund or cause partial refunds.
4. You will be refunded after we receive the returned product and check it. Once your return is received and inspected, we will send you an email to notify you that we have received your returned item. Then your refund will be processed, and a credit will automatically be applied to your credit card or original method of payment, within 5-7 business days.
5. If there is insufficient stock of exchanging products, we will inform you about the specific treatment.

References

• AngryMiao
• AngryMiao
• Angry Miao
• Angry Miao
• Angry Miao 怒喵科技官网
• Angry Miao 怒喵科技官网
• Angry Miao 怒喵科技官网
• Angry Miao 怒喵科技官网

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>