Angry Miao AM21 AM Relic 80 User Manual
- March 17, 2024
- Angry Miao
Table of Contents
Angry Miao AM21 AM Relic 80 User Manual
Product Overview
| Product Name | AM Relic 80 |
|---|---|
| Model Name | AM21 |
| Weight | Base Kit 2.00Kg, Bundle 2.25Kg |
| Typing Angle | 8° keyboard inclination |
| Mount | Adjustable Leaf Spring |
| Drivers | No additional drivers required, supports N-key rollover |
| Layout/Lighting Configuration | Configurable on Windows/macOS |
| Switch Mounting Style | Hot-swappable |
| Connectivity | Wired, Bluetooth 5.1, wireless 2.4G |
| Indicators | Case RGB lighting and Caps Lock indicator |
| USB Port | USB 2.0, Type-C, supports USB-C to USB-C |
| Battery | Lithium polymer 5000mAh *2, 10000mAh total (typical) |
| Qi Wireless Charging | Wireless charging 5W, starts charging automatically when |
battery power drops below 85% and stops at 100%
Operating Temperature Range| 0°C –45°C
Bluetooth Transmitter Frequency Band| 2.4GHz-2.4835GHz
Bluetooth Transmitter Frequency Range| 2400MHz-2438MHz
Bluetooth Transmitter Power| c 20dBm(EIRP)
2.4G Receiver Frequency Band| 2.4GHz-2.4835GHz
2.4G Receiver Frequency Range| 2400MHz-2438MHz
2.4G Receiver Power| <‘ 20dBm(EIRP)
Quick Start Guide
- Remove AM Relic 80 from the packaging.
- Upon first use, plug in the USB cable to activate the keyboard.
- Long press Fn+Esc to turn on/off the keyboard.
- When not plugged in, long press Fn + 1 for 3s, until the 1 key continuously lights up white (other in-switch LEDs are disabled), to enter Bluetooth pairing mode.
- When not plugged in, long press Fn + 4 for 3s, until the 4 key continuously lights up white (other in-switch LEDs are disabled), to establish a 2.4G connection.
- After successfully establishing a Bluetooth or 2.4G connection, the keyboard is ready to use.
Shortcut Keys
| Function | Operation | Indicator Status |
|---|---|---|
| Turn device on/ off | Long press Fn + Esc for 3s | |
| Factory reset | Long press Fn + R for 5s | |
| Media combos | Fn + F1 Mute | |
| Fn + F2 Volume down | ||
| Fn + F3 Volume up | ||
| Fn + F4 Previous track | ||
| Fn + F5 Next track | ||
| Fn + F6 Play/pause | ||
| Fn + F9 Enable/disable | ||
| Case lighting | in-switch LEDs | |
| Fn + F10 Enable/disable | ||
| and in- switch LED combos | case lighting | |
| Fn + F11 Switch between in-switch LED | ||
| lighting effects | ||
| Function | Operation | Indicator Status |
| --- | --- | --- |
| Case lighting and in- switch LED combos | Fn + F12 Switch between case lighting | |
| modes | ||
| Fn + ↑ Increase case lighting brightness | ||
| Fn + ↓ Decrease case lighting brightness | ||
| Fn + → Increase case lighting effect speed | ||
| Fn + ← Decrease case lighting effect speed | ||
| Fn + + Increase in- switch LED brightness | ||
| Fn + – Decrease in- switch LED brightness | ||
| Bluetootu connection | Fn + 1 | To connect to Bluetooth device 1, long press for |
5s until the case lighting blinks white and the 1 key and continuously
indicates white. The case lighting will quickly flash blue for 3s and the
1/2/3 key will continuously indicate blue if pairing was successful. After
successfully pairing, the in-switch LEDs will return to their original
lighting effect.
Function| Operation| Indicator Status
---|---|---
Bluetooth connections| Fn + 2| To connect to Bluetooth device 2, long press
for 5s until the case lighting blinks white and the 1 key and continuously
indicates white. The case lighting will quickly flash blue for 3s and the
1/2/3 key will continuously indicate blue if pairing was successful. After
successfully pairing, the in-switch LEDs will return to their original
lighting effect.
Fn + 3| To connect to Bluetooth device 3, long press for 5s until the
case lighting blinks white and the 1 key and continuously indicates white. The
case lighting will quickly flash blue for 3s and the 1/2/3 key will
continuously indicate blue if pairing was successful. After successfully
pairing, the in-switch LEDs will return to their original lighting effect.
Switching devices| press Fn + 1/2/3 to switch between different devices. The
selected device will be indicated by the corresponding key, and return to the
original lighting effect after 5s.
Bluetooth standby mode| after the keyboard has been idle for 15 minutes,
lighting will be disabled automatically while Bluetooth remains
connected.Pressing a key automatically wakes up the keyboard.
FCC Compliance Statement
This device complies with Part 15 of the FCC rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.