alza power APW-PBF26PDB Power Bank 26 800 mAh User Manual
- June 9, 2024
- alza power
Table of Contents
alza power APW-PBF26PDB Power Bank 26 800 mAh
THANK YOU FOR CHOOSING US!
We value your trust. We hope that you will be happy with our product, and
as excited about it as we are. We try to offer products of the highest quality
that satisfy even the most demanding requirements. If you are satisfied, it
would make us very happy if you chose us again the next time you make a
purchase.
We are environmentally conscious, therefore we use special eco-friendly
packaging. Please recycle!
Recycling and Environmental Protection
We try to avoid using plastic packaging and film and only use them when they
are absolutely necessary to protect the product. So how are we different?
Packaging you can eat… Well, almost:
- We use ink made from soybeans as opposed to classic petroleum-based ink.
- The majority of our packaging is made from 100% recyclable paper.
- We limit the use of adhesives. If absolutely necessary, we make sure to choose only water-soluble ones.
We think globally, which means that we actively search for eco-friendly solutions. We keep an eye on trending technology and place findings of the scientific community into practice. We don‘t just try to meet quotas and mandates, we aim to exceed them.
TECHNICAL PARAMETERS
| Battery capacity | 26800 mAh |
|---|---|
| Battery type | Li-Polymer 26 800 mAh |
| Charging time | 4 hours (USB-C: 20 V/3 A) |
| Total maximum output | Max. 60 W |
| USB-A (output) | Output: 5 V/3 A; 9 V/2 A; 12 V/ 1.5 A (max. 18 W) |
| USB-A (output) | Output: 5 V/3 A; 9 V/ 2 A; 12 V/1.5 A (max 18 W) |
| USB-C (input/output) | Output: 5 V/3 A; 9 V/3 A; 12 V/3 A; 15 V/3 A; 20 |
V/3 A (max. 60 W)
Input: 5 V/3 A; 9 V/3 A; 12 V/2.5 A; 15 V/2 A; 20 V/1.5 A (max. 30 W)
Support for fast charging| PD 2.0/3.0, Qualcomm Quick Charge 3.0
Dimensions| 188 × 87 × 23 mm
Weight| 620 g
Operating temperature| -20-60 ºC
Storage temperature| -5-35 °C
Operating humidity| up to 70 %
Storage humidity| up to 75 %
OVERVIEW
- USB-C port (input/output)
- 2x USB-A port (output)
- LED indicators (indicate the charge status of the power bank)
- Power bank on/off button
INSTRUCTIONS
Checking the power status of the power bank
Before charging your device, you should check the charge status of the power bank. Press the on/off button and the display will show the current state of charge. If only one LED on the front flashes, the power bank is less than 20% charged and needs to be recharged. If no LED indicator lights up, the power bank is fully discharged.
When:
- one LED indicator lights up, the other LED indicator flashes: the power bank is charged to 20-50%;
- two LED indicators light up, the third LED indicator flashes: the power bank is 50-70% charged;
- three LED indicators light up, the fourth LED indicator flashes: the power bank is 70-90% charged;
- four LED indicators light up: the power bank is 100% charged.
Charging the power bank
Fully charge the power bank before using it for the first time. The power bank can be charged using the USB-C connector. We recommend that you check the charge status of the power bank before each use and connection to the mains.
- Plug one end of the charging cable into the USB-C port of the power bank and plug the other end into your laptop’s USB port or the port on your AC adapter.
- Charging will start automatically. The charging status of the power bank will be indicated by the gradual illumination of the individual LED indicators.
- Disconnect the charged device from the power supply. The charging time of the power bank may vary depending on the charger used and the USB port selected.
- To maintain the power bank’s optimal performance and durability, we recommend re-charging the device every 3 months when not in normal daily use.
- The charging time of the power bank may vary depending on the power adapter used and the current battery condition.
| Adapter output | Average charge time 0- 100% |
|---|---|
| USB-C 30 W PD | 4 hours |
| USB-C 15 W | 9 hours |
| USB-C 12 W | 13 hours |
| USB-C 5 W | 24 hours |
Device charging
You can charge your device using the USB-A output ports or the USB-C port. The power bank allows you to charge up to three devices simultaneously. A USB-C cable is required to charge a laptop.
- Plug one end of the power cable into the USB power port of your device and connect the other end to the power bank’s output port.
- When connected to the device being charged, the power bank automatically starts charging the connected device. As the connected device charges, the individual LED indicators will gradually turn off.
- Once the connected device is charged, disconnect it from the power bank.
SAFETY INFORMATION
- Read the safety and operating instructions. Failure to observe the safety and operating instructions can endanger people or damage the device.
- This product is only suitable for household use.
- Use and store the product out of the reach of children. Children must not use this product.
- This product is designed to charge digital device batteries. Use it only in accordance with the instructions in this operating manual. Do not use the product for purposes other than those for which it is intended.
- This product does not contain parts repairable by the user. In the event of a malfunction or defect contact the nearest authorized service center. Check the product or its accessories regularly for damage.
- It is forbidden to use a damaged product or its accessories.
- Always disconnect the interface cable when the product or connected digital device is fully charged. Do not leave the cable plugged in.
- If you will not be using the product for a long time, we still recommend charging it regularly (at least once every six months). This will extend its life.
- Keep this product away from heat sources such as stoves or direct sunlight. No naked flame sources, such as lighted candles, should be placed on the product.
- Do not expose the product to dripping or splashing water or other liquids. Do not place containers filled with water, such as vases, on the product.
- Do not expose the product to extreme temperatures, dust, or dirt.
- Do not immerse the product in water or other liquids or throw it into a fire.
- Do not use or store the product near materials/objects that could ignite, flammable or explosive substances, etc.
- Do not leave the product unattended while it is in operation.
- While the product is in operation, ensure that there is sufficient free space around it for proper air circulation. Use the product only on a flat and firm surface. Do not use it on a table with a tablecloth, on a worktop on a dish towel, on a carpet, etc. Never cover the product.
- Do not insert any objects (such as wires or other objects with metal terminals) into the product’s jacks.
- Do not short-circuit, disassemble or otherwise mechanically damage the product.
- While the product is in operation, it may become hot. This is a normal occurrence. Therefore, make sure that there are no heat-sensitive objects/surfaces near the product.
- If you notice an unpleasant odor or smoke while using the product, unplug the product immediately and stop using it. Contact an authorized customer center.
- Avoid overloading the product. Avoid dropping the product.
- Do not place any objects on the product. There is a risk of irreversible damage to the product.
- If you have transported the product when cold, wait until the temperature of the product has equalized before using it.
- Use only a clean, dry cloth to clean the product. Do not immerse the product in water or other liquids to wash it. Do not use any chemical cleaners, abrasives, gasoline, thinners, or other similar substances. Before cleaning, make sure that the product is disconnected from the power supply.
- Store the product in a dry and well-ventilated place. Do not place any objects on the product when in storage.
WARRANTY & SUPPORT
Your new product is protected by our 24-month warranty, or extended warranty (if stated), which you can apply at any of our points of sale. For inquiries, you can use the contact form or one of our international call centers.
- Online: www.alzashop.com/contact.
This product meets all of the related basic EU regulatory requirements. The EU declaration of conformity is available at www.alzashop.com/DoC. This product sold in the European Union meets the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).
The use of the WEEE Symbol indicates that this product should not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider, or the shop where you purchased the item.
The “For indoor use, only” symbol indicates that the product is not intended for outdoor use.
alza power
Co. Reg. No. 27082440
Alza.cz a.s., Jankovcova 1522/53, 170 00 Prague 7, Czech Republic
© 2022 Alza.cz a.s. All Rights Reserved.