AIM CR1009W Radio Alarm Clock User Manual

USER MANUAL
INTELLI SET ALARM
CLOCK RADIO
WITH WIRELESS AND
USB CHARGE PAD

• BLUETOOTH
• USB FOR CHARGE
• WIRELESS CHARGE
• MULTI ALARM

Please read this instruction manual carefully before using for the first time and always keep these instructions.

OPERATING INSTRUCTIONS

BOOT:

1. After unpacking and accessing (output is QC3.0 quick charge DC 5V 3A, 9V 2A, 12V 1.5a) adapter, long press the power button to enter the startup program. At this point, the LED on the front display interface is all lit for 5 seconds for self-check, so as to ensure the normal use of the display screen. After normal display, the power indicator lights up.

CLOCK SETTINGS:

1. Press the power button to enter the clock setting program when the LED self-check on the display screen displays 00:00 (the default clock of the machine is 24H). At this point, the number of hours (00:) flicker, through the “+” or “-” key set to the correct number of hours (00: -23:), then short press M key to switch to the minute setting area, at this time the minute (00) flicker, through.
2. After setting the “+” or “-” key to the correct number of minutes (: 00- : 59), press the M key to confirm or pause for 3 seconds, the machine will automatically complete the default setting and return to the home screen display interface.

ALARM SETTINGS:

1. After confirming that the clock time is displayed correctly, press M to switch to the setting of alarm 1 (press M again to switch to the setting of alarm 2). At this time, the logo of alarm clock 1 or alarm clock 2 lights up and flashes. Press the power button to enter the setting program (the same as alarm clock 1 and 2).
2. Timing alarm settings: Hours (00) when flashing, debug to the correct number of hours (00: -23) through the “+” or “-” key, then switch to the minute setting area by pressing the M key. At this time, the minute (00) flashes.
3. Alarm type selection: This machine preset has 5 kinds of chord sound alarm and timing FM function (alarm 6) to choose from, through the “+” or “-” key in order or reverse order to choose, when the selection of the corresponding ringtone horn will have a pre-listening effect, the default program is 01. Select OK and press M to enter the next setting.
4. Alarm ON/OFF: “ON” or “OFF” of the alarm can be selected by “+” or “-” key. When “ON” is selected, the pattern of the corresponding alarm clock 1 or 2 will light up after exiting the setting to show that the alarm clock is set successfully. When selecting “OFF”, the corresponding alarm clock icon is not lit. After setting OK, press M to enter the next setting.
5. Alarm cycle setting: the “+” or “-” key can be used to select the cycle of the alarm to ring for ONE day (ONE) or ALL day (ALL). When “ONE” is selected, the alarm will ring for 30 seconds when the clock reaches the time of the timer alarm, and the alarm will automatically exit after 30 seconds when there is no operation. When you choose “ALL”, ring a bell at a certain time each day.
6. After the above steps are performed in sequence, press the M key to confirm or pause for 3 seconds, and the default setting will be automatically completed and returned to the home screen.

APPLICATION OF SNOOZE BUTTON:

1. One-button SNOOZE setting: When the alarm goes off, press SNOOZE to enter SNOOZE mode for one time (or press any other button to end the SNOOZE mode). Five minutes later, the alarm will ring again.
2. Brightness adjustment of the display: In any picture, press the “SNOOZE” button to highlight the first time, highlight the second time, highlight the third time and so on. When there is no key operation for 15 seconds, the machine will enter automatically and keep the general display.
3. Set the clock alarm clock to zero: when the time is displayed on the main interface, press the “SNOOZE” button for a long time for 5 seconds to enter the restore factory setting program, and everything is set to zero.

FM PLAYING FUNCTION AND TIMING FM PLAYING FUNCTION:
(during playing FM, please use the MIC charging cable of the machine to connect to the USB interface)

1. In the clock display the main interface, long press the M key after entering FM broadcast program (FM icon bright) long, short press the switch on the power key can automatically search FM radio, search until after all can search to the FM radio, broadcast program will automatically enter the first FM radio, long press the M key to exit the FM broadcast function again and return to the clock display the main interface.
2. When FM is playing, press the “+” button for the next station; Long press “+” to increase the volume; Press the “-” key to the previous station; Long press “-” to reduce the volume. Press M to play/pause, and press start to search the platform.
3. When setting alarm 1 or 2, switch to “6” in the alarm selection to automatically wake up the FM playing function. The timing time and playing operation are the same as the alarm setting and FM playing operation.

USB POWER FUNCTION:

1. When using the local type-c power cord, use the FM antenna (MIC charging cable) on the USB interface to provide DC 5V power for other devices.

POWER FUNCTION:

1. This machine supplies power to the external adapter. Please use the standard type-c (DC 5V 2A) charging line of this machine and the DC power supply output for quick charging of QC3.0 (DC 5V 3A, 9V 2A, 12V 1.5a) for charging.
2. When the machine is charging, the brightness of the display screen switches between brightness modes such as highlighting, general brightness and dark light (keep dark light display state when there is no operation, press any key to activate the bright display).

WIRELESS CHARGING FUNCTION SETTING:

1. When the wireless charging of the machine works normally, the power supply supplies the external power supply. Please use the adapter with output QC3.0 quick charging (DC 5V 3A,9V 2A, 12V 1.5a) to power the type-c interface of the machine.
2. When charging wireless power, the power cord must be the standard type-c charging cable (DC 5V 2A) of the machine, otherwise the charging effect of wireless charging will be affected.
3. After the external power supply is successful, the device with wireless charging function (such as mobile phone) shall be placed on the center area of the wireless charging transmitter (net cloth) at the top of the machine smoothly, so as to ensure the good docking between the wireless charging transmitter and the receiver
4. Connect to the standard type-c charging line of the machine, and when waiting for charging, there will be a red light on the upper right corner of the cloth, a green light will be on when charging, and the green light will remind you to re-access the type-c charging line.
5. When wireless charging works, the output power of DC 5V can be provided for the USB interface of the machine at the same time, which can be used for charging mobile devices without wireless charging function.

LOCAL WARNING:

1. If the machine is not used for a long time, please press the power button to enter the background operation mode to ensure the normal service life of the product.
2. Matters needing attention when the machine is used or used: antiinsolation, anti-moisture, anti-corrosion, anti-drop, anti-pressure.
3. Automatic repair function of the machine software: in the process of use, if abnormal operation mode or operation jam occurs (the machine freezes), please long press the power button for about 8 seconds (at this time, the power cannot be disconnected), the machine will automatically enter the program repair mode until the normal boot.

LOCAL INFORMATION:

1. Product specification: 137131.593 mm
2. Product material: ABS shell material + hd PC display lens +EVA non-slip pad + high-elastic wear-resistant cloth net
3. Display size: 5 “LED display clock alarm clock
4. No charging power: DC 5-9v / 850-1000mah for single wireless charging, DC 5-9v / 400-650mah for simultaneous FM function and wireless charging
5. The speaker specification: ø66 mm 3 w
6. Sensitivity: 85%
7. Frequency width: 800MHZ – 20000MHZ
8. Chip version: V 5.0
9. Wireless charging standard: WPC+QI wireless charging standard

FRONT DISPLAY INTERFACE

1. Top wireless charging area.
2. Wireless traffic light indicator hole.

BACK DISPLAY INTERFACE

1. Charging light hole.

2. Short press when alarm: enter snooze mode for 5 minutes.
   Other modes short press: cycle adjust light brightness.

3. Type-c charging port.

4. The FM mode Short press: next channel long press: increase volume.
   Clock mode short press: add one long press: increment.

5. The FM mode short press: last channel long press: to reduce the volume.
   Clock mode short press: minus one long press: decreasing

6. Long press: enter/exit FM mode.
   Clock mode short press: sets the alarm/ toggle settings long press: enter/exit FM.

7. The FM mode short press: automatic search table long press: enter the background.
   Time mode short press: set the time long press: enter the background. Press “boot” for the first time.

8. The DC 5V power supply.
   FM antenna (MIC charging line).

1 YEAR LIMITED WARRANTY

The Manufacturer hereby provides a warranty to the original purchaser of this product (the  consumer) that this product will be free of manufacturing defects in materials and workmanship which under normal, personal, family or household use (commercial use expressly excluded) manifest themselves within the 1 year from the date of purchase.

EXCLUSIONS

• The warranty does not include and will not be construed to cover products damaged as a result of disaster, misuse, commercial use, not in accordance within the written instructions included with the product, abuse and/or any non-authorised modification of the product, incorrect installation of the product or normal wear and tear.
• Insect infestation of the electrical or motor makes the claim invalid.
• Customer abuse do not fall under warranty.

WAIVER
The warranty and the obligations of the Manufacturer provided herein are in lieu of, and the consumer, waives all other warranties, guarantees, conditions or liabilities, express or implied, arising by law or otherwise, including without limitation, any obligation of the manufacturer in respect of any injury, loss or damage (direct, indirect or  consequential) arising out of the use of, or inability to use this product and whether or not occasioned by the manufacturer’s negligence or any act or omission on its part.

PROOF OF PURCHASE
Any claim in terms of the warranty must be supported by a proof of purchase. If such proof is not available, then not withstanding anything to the contrary herein, the  service agent’s prevailing charges for services/repairs and/or spares will be payable by the Consumer upon collection of the repaired product. The Consumer should call the Pick n Pay CUSTOMER CARE number on 0860 30 30 30 (only in South Africa). Customers residing outside South Africa may return the product back to a Pick n Pay store. During the warranty period the product may only be serviced and/or repaired by the Manufacturer’s duly authorised agent(s).

If this product proves to  be faulty during normaluse due to defective materials or workmanship. Refer to our website for terms and conditions.

REPAIRS PROCEDURE

Should you experience any faults on your Aim product, please adhere to the following procedure to have the fault rectified speedily and professionally. You can return the product to the store. Call the Pick n Pay CUSTOMER CARE number on 0860 30 30 30 (only in South Africa) to report the fault and make arrangements for the next steps.
Note: Should you live in an outlying area or outside South Africa, it may be necessary to return the product to the store nearest to you.

COST OF REPAIRS
UNDER WARRANTY
Any items still under warranty will be repaired free of charge, as long as it complies with the terms and conditions of the warranty (refer to “warranties” section in this manual). Any items that need to be repaired that are NOT covered in the warranty will be for the consumer’s expense. A quote for the repair/replacement of these items will be provided to the consumer for approval prior to repairs being conducted.

OUT OF WARRANTY
Any items that need to be repaired once the warranty has expired will be for the consumer’s expense including call out fees. A quote for the repair/replacement of these items will be provided to the consumer for approval prior to repairs being conducted.

We are confident about the quality of our products. If you are not 100% satisfied with our product we will gladly exchange or give you your money back.

Raymond Ackerman
Founder of Pick Pay
Specially packed for
Pick n Pay Retailers (Pty) Ltd.
Pick n Pay Office Park,
101 Rosmead Avenue,
Kenilworth, Cape Town, 7708
www.picknpay.co.za
CUSTOMER CARE
Sharecall: 0860 30 30 30
ONLY IN SOUTH AFRICA
customercare@pnp.co.za
Product of China
MODEL NUMBER:
CR1009W

References

• Pick n Pay | Welcome! Start Filling Your Trolley

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>