REACT HEALTH G3 BPAP 30Vt 3B Luna G3 CPAP Machine Instruction Manual
- June 9, 2024
- REACT HEALTH
Table of Contents
Quick Operation Manual
Luna G3 BPAP S/T & Luna G3 BPAP 25A
Button Functions
| Home Button：Return to the previous menu or main interface
---|---
| Knob: Adjust device settings
| Start / Stop Button：Start / Stop delivering air
Setting up the Device
A. Connect one end of the tube to the assembled mask.
B. Connect one end of the tube to the air outlet of the device, as shown in
the figure above. Or connect the heated tubing joint to the air outlet of the
device, and then insert the power plug into the heated tubing port on the back
of the device.
C. Connect the power adapter to the DC inlet of the main device.
D. Connect the power cord to the power adapter.
E. Plug the power cord into the power outlet.
Adjusting Device Settings
A. Connect the power cord and power adapter properly, The screen displays the
Main Interface shown in the figure left below, press the Start / Stop Button ,
and the
device will start delivering air, the screen displays the Main Interface shown
the figure middle below (applicable to Luna G3 BPAP 25A model) or as shown in
the figure right below (applicable to Luna G3 BPAP S/T model).
B. Turn the Knob to access the Initial Setup Interface of the Patient Menu, as shown in the figure left below. The Heated Tubing option can only be adjusted when the device is connected to the heated tube, as shown in the figure right below.
C. Press the Knob to access the Setup Interface, as shown in the figure below.
D. Turn the Knob to adjust an option.
E. Press the Knob to confirm your adjustment to the option.
F. The cursor switches among the options as you turn the Knob , as shown in the figure below. Refer to steps C-E to adjust other options. Press the Home Button to exit the Setup Interface.
Starting Treatment
After you finish adjusting device settings and return to the Main Interface, press the Start /Stop Button to start treatment.