dals LEDDOWNG3 3 Inch Gimbal Recessed Installation Guide
- June 9, 2024
- dals
Table of Contents
dals LEDDOWNG3 3 Inch Gimbal Recessed
ITEMS INCLUDED IN THE BOX
- 1x LED gimbal light with CCT switch
- 1x Junction box with integrated driver
Works with most dimmers.
Refer to DALS website for dimmer compatibility list.
| MODEL | LUMENS | WATTS | KELVIN | **DIMMABLE*** |
|---|---|---|---|---|
| GMB4-CC-XX | 810 lm | 11W | 2700K, 3000K, 3500K, 4000K, 5000K | ✓ |
| LEDDOWNG3-CC-XX | 680 lm | 8W | 2700K, 3000K, 3500K, 4000K, 5000K | ✓ |
| LEDDOWNG4-CC-XX | 680 lm | 8W | 2700K, 3000K, 3500K, 4000K, 5000K | ✓ |
SIDE VIEW OF INSTALLATION
BEFORE YOU START
BEFORE STARTING INSTALLATION, SHUT THE LINE FEED POWER FF USING THE CIRCUIT BREAKER.
Instructions pertaining to a risk of fire, electric shock or injury to
persons. Recessed downlight installation requires knowledge of luminaire
electrical systems. lnstallation should be done by a certifed electrician. To
prevent wiring damage or abrasion, do not expose wiring to the edges of sheet
metal or other sharp objects. Suitable for wet locations, Energy Star rated,
IC-rated for direct contact with insulation, and ETL certified listed
compliant.
This class B digital apparatus complies with Canadian ICES-O05. This digital
apparatus does not exceed the Class B limits for radio-noise emissions from
digital apparatus as set out in the Radio Interference Regulations of the
Canadian Department of Communications.
INSTALLATION INSTRUCTIONS
- Drill hole in ceiling and prepare supply wires. Install and unshield the line feed wire 6» (15 cm) and strip wires 5/8» (1.6 cm). Bring supply power to junction box through knockout.
- Open the lid of the junction box. Use the wirenuts to match the white wire from the line feed with the white wire of the junction box, to match the black wire from the line feed with the black wire of the junction box and to match the copper wire from the line feed and with the green wire of the junction box.
- Route junction box through cut-out and connect recessed LED pannel to junction box with the quick connector.
- Compress the springs and push the fixture in the opening. It is easier to do one spring ata time.
WARRANTY
DALS offers a warranty of 5 years from the date of purchase that covers repair
or replacement of defective parts of the housing, optics, and electronics.
To contact DALS customer service call to
1-877-430-1818 or send an e-mail to
info@dals.com.
1877 430 1818
www.dals.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>