DELUX N618XSD Rechargeable RGB Vertical Mouse User Manual

: June 9, 2024
: DELUX

Table of Contents

INTRODUCTION
PRODUCT DESCRIPTION
Charging
Connection
- Wireless Mode
Functions
Warranty Conditions
EU Declaration of Conformity
WEEE
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DELUX N618XSD Rechargeable RGB Vertical Mouse User Manual

INTRODUCTION

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.

PRODUCT DESCRIPTION

OLED screen
Forward
Backward
Left button
Right button
Charging indicator
Scroll wheel
DPI
Palm rest
Thumb scroll wheel
On/Off Switch
Mode indicator
Mode switching button
Receriver storage slot
Receiver

Charging

Connect the mouse to the USB port via USB Type-C port of the mouse. The indicator light turns red when charging and goes off after the charging is complete.

Connection

Mode Switching
Tap the mode switching button to switch between different modes (see below). The current mode is shown on the OLED screen and the corresponding indicator light flashes.

Wired Mode
Connect the mouse to the computer via USB Type-C port of the mouse. Tap the mode switching button until the light goes off. Note that wired mode can only be used if the mouse is turned on

Wireless Mode

Turn on the mouse after inserting the receiver into the device, then tap the mode switching button to 2.4G wireless mode. The mouse can be used when the corresponding indicator light goes off.

If you need to restart the mode, press the mode switching button for about three seconds when you’re in 2.4G Wireless mode, the indicator flashes quickly and then goes off, which means that the reset has been successful.

Bluetooth Mode
Turn on the mouse, tap the mode switching button to BT1/BT2 mode. The corresponding indicator light will flash, which means you have entered the Bluetooth mode. The indicator light will flash quickly when you press the mode switching button for about three seconds – this means you can now search for the mouse on your device. Search for “BT5.0MOUSE1” or “BT5.0MOUSE2” in your device’s Bluetooth settings. The indicator light will go off when you connect successfully.

Functions

Light Mode Switching
Pressing the right button and the backward button at the same time switches the current lighting mode. You can adjust the backlight mode in the driver software.
Automatic Sensing Light
The default is to turn on the light sensation. The backlight goes off when you palm is close to the mouse. Press the right and left buttons at the same time for about three seconds, the light sensation turns off after white light flashes twice. Long press the right and left button to reopen the light sensation.
Disabling Functions of Side Buttons
Press forward button and the backward button for about three seconds to lock the functions of these buttons. Long press these two buttons to reactive their function.

DPI Switching
Tap the DPI button to switch the DPI.

800 DPI (red light)
1200 DPI (green light)
1600 DPI (blue light)
2400 DPI (purple light)
4000 DPI (yellow light)

Successful switch is indicated with the corresponding light flashing twice.

Default DPI: 1200. The DPI can be customized in the driver software with range between 600 to 4000 DPI

Thumb Scroll Wheel
Thumb scroll wheel function is available for Windows only. Rolling up moves the page to the left, rolling down moves the page to the right.

Driver Software

Driver software is available on Windows only. To download it, visit: www.deluxworld.com/en-service.html.

Click “+” symbol on the top-left of the interface to create a new configuration file.
Driver Software

In order to create a macro, click on “Macro management”, then click on the “+” symbol to create a new macro, and press “REC” to start recording of the macro. Enter the keys that you want on your keyboard, and when you’re done, click on “STOP”. Your macro will be available upon saving it.

Furthermore, you can configure the lighting, function of the buttons and DPI.

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.

The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:

Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.

EU Declaration of Conformity

Identification data of the manufacturer’s / importer’s authorized representative:

Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440

Subject of the declaration:

Title: Mouse
Model / Type: Delux N618XSD

The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):

Directive No. 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU

Prague, 30.9.2022

WEEE

This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.