Gastview PTZ-DOY2-2DHX400WGC Wireless Camera User Manual
- June 9, 2024
- Gastview
Table of Contents
Gastview PTZ-DOY2-2DHX400WGC Wireless Camera
packing List
| item | quantity |
|---|---|
| Camera | 1 |
| Manual book | 1 |
| Screws bags | 1 |
| Waterproof part | 1 |
| Warranty card | 1 |
Description
Device Connection
The Apple phone searches and downloads on the APP store, Android phones can search camhipro download in app stores such as google play. Or scan the following QR code download installation APP, Please follow the following steps to set up your camera after installation.
WIFI version connection
Connect the camera to the power supply (do not connect to the network), waiting for the equipment self-inspection completed. Open camhipro APP。
AP hotspot connection
-
Click “+” and select IP Camera
-
Click on “ New device”
-
Click “Power is on, Next step”
-
Click “Not connected to the network cable”
-
Click “Go add” in the red box
-
Click go to connect(default password is 01234567 do not change)
-
Click “ add to” (username and password default “admin”, After adding successfully. Next, connect the camera to the Internet.
-
Choose the WIFI name and enter the wireless password. click configure wireless and add. You can choose not to configure the addition directly if there is no WIFI nearby, and browse the image by AP hot spots.
-
Camera name can be customized, click confirm, add complete
Wired Connection
Connect the camera to the power supply and connect to the network cable. (Note: The network connected by the camera needs to be the same network as the network connected by the mobile phone)Wait for the device to self-check.
-
Click “+”and select IP Camera
-
Click “Device in use”
-
Click “Search Nearby Devices”
-
Click the device which was searched
-
Click “Confirm Add”
-
Click confirm to add
4G version connection
(Make sure the camera is installed in operator 4Gnetworkcoverage, non-4G version negligible)
Insert the SIM card into the camera, pay attention to the SIM card direction (ensure that the4Gcardhasflow and within the validity period) connected to the power supply, waiting for the equipment self-inspection completed. Next open APP and add 4g cameras.
Scan QR Code Add Device
-
Click “+” and select “IP camera”
-
Click “Device in use”
-
Click “Scan QR code”
The QR code on the fuselage is the camera’s unique connection sign, please keep it properly, do not tear it up. -
Aim at 2-D code and scan , get UID number, click “Confirm add”
-
Give a name and Click “confirm” to finish
-
Waiting for the camera status to “online” click on the camera to browse the screen.
Add devices AP hot spots
Open mobile phone WIFI search MIFI_XXXX hot connection, WIFI password is 1234567890. After successful connection, open APP, select “device in use”→“ Search Nearby Devices”→ Click the device which was searched → “Confirm Add”→ Give a name → confirm
-
WIFI on MIFI_XXXX phone connection
-
Enter WIFI password after successful connection refer to “2.1 Scan QR Code Add”
Share Add Camera
When a camera is added normally on a mobile phone, click the camera settings
button to enter the camera settings interface, and then click the sharing
button in the upper right corner of the interface, APP automatically generate
a QR code. After receiving the QR code, click add sharing device, scan the QR
code, click add, and add it.
Additional Instructions
-
After the camera is added, click to enter the main interface; slide the picture are a and turn the camera to view the picture. By default in vertical screen mode display, click “full screen” to change the screen to full screen;
-
Functions represented by each icon:
icon| Function| icon| Function
---|---|---|---
| Remote monitoring| | Voice intercom
| Cell phone video| | Cell phone capture
| Mirror/flip| | Focused Addition
| Preset| | Volume control
| Image Regulation| | Night vision mode
| Mobile tracking| | Fluent/HD
| Full/vertical| | Settings
| Return| | Next page
| List Display Mode| | Add new equipment
| Playback| | Local documents
Camera function settings:
- Wireless settings: set camera to connect wireless network;
- Change password: change the password of camera, use moresecure;
- Alarm management and notification: Receive alarm push: select open or close; Equipment alarm: support move detection or humanoid alarm; Alarm linkage: when the alarm is triggered, The horn will sound a warning or send a message to the mobile phone or send email to your designated email address;
- Video settings: set the video stream, frame rate, coding level, video format (non-professional please don’t try to change);
- Audio settings: Set audio input or output volume (be sure to select microphone input);
- SD card plan recording: set video time and time period;
- SD card settings: view SD card space, formatted SDcard;
- Device time setting: can synchronize mobile phone timetocameraand set time zone;
- Default setting: can restart the camera, restore factory settings;
- Device Information: camera hardware and software version and other information;
Video Playback And Download
-
Video playback: Click the Video playback key on the device list interface ” ” Enter the video play back interface, there are “time playback” and “file playback” two playback options ;” time play back” directly drag the timeline to the time point you want to play back ,” file playback” select play back time point play. Click the Query Key ” ” Time period can be queried.
-
Video download: in the “file playback” interface select any segment of the video file selection “download ”
-
View local videos and screenshots: Click ” ” on the device list interface to view the video and screenshots in the phone; click on the file to play directly, click on the ” ” save icon on the right to save the downloaded file transcoding to the phone album
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>