COSATTO Come and Go Rotate i-Size Car Seat Instructions

: October 30, 2023
: COSATTO

Table of Contents

Important: Keep these instructions for future reference
- Important safety Information
- Location
Safety – Please read carefully:
Notice
Care & Maintenance
Visual language Key
Part List
Replacement Parts
Fitting & Operation Information
Checklist
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**COSATTO Come and Go Rotate i-Size Car Seat Instructions

**

Important: Keep these instructions for future reference

Important safety Information

The instruction manual should be kept safely with child car seat for its life period:

There is a compartment at the rear of the child car seat for storage of the instruction manual.

It is recommended to check that the child restraint is compatible with the intended vehicleat the time of purchase.

Please refer to the vehicle list, Cosatto fit checker app (http://cosat.to/fitchecker) or thevehicle fitting list section on the website (http://cosat.to/comeandgoisizerotatevl).

Seat positions in other vehicles may also be suitable to accept the child restraint. If indoubt, consult either Cosatto or the retailer.

Child age and weight:

This child car seat has been approved for transportation in cars of children from birth up to maximum weight of 18 kg.
When use as a rearward facing child car seat, the car seat is suitable from birth, height between 40 and 105 cm, up to maximum weight of 18 kg.
When use as a forward facing child car seat, the car seat is suitable from 9 kg, height between 76 and 105 cm, up to maximum weight of 18 kg.
Cosatto recommend to use the car seat in rearward facing mode for as long as possible

IMPORTANT – DO NOT USE FORWARD FACING BEFORE THE CHILD’S AGE EXCEEDS15 MONTHS.

Location

Refer to the vehicle list for information of where the child car seat base will fit in your vehicle.
Never use the child car seat on a seat where an airbag is fitted and active. Refer to your vehicle user manual for information on de-activating the airbag.

Safety – Please read carefully:

NEVER use this child car seat with its side facing the vehicle seat.
Any rigid items and plastic parts of the child car seat must be so located and installed that they are not liable, during everyday use of the vehicle, to become trapped by a movable seat or in a door of vehicle.
If any load bearing points other than those described in the instructions are used, this can significantly reduce the protection factor of the child car seat.• ALWAYS secure your child with the safety harness when using this child car seat.
Never leave your child unattended.
Do not attempt to dismantle, modify or add to any part of the child car seat or changethe way your vehicle seat belts are made or used.
After an accident the child car seat should be replaced and the vehicle seat belts. lthough they may look undamaged, they may not protect your child as well as theyshould.
Do not place anything such as a towel or cushion under the child car seat. This couldaffect the performance of the child restraint system in an accident.
Always make sure that the child car seat harness are correctly tensioned to ensuremaximum protection for your child.
Prevent harness from getting trapped between car doors or rubbing against sharp parts of the seat or body.
If the harness/vehicle belts becomes cut or frayed, replace it before travelling.
Never use replacement parts other than those approved by Cosatto.
Cosatto advise that child car seat should not be bought or sold second-hand. Many child car seat acquired this way have been found to be dangerous.
NOTE: The child car seat can mark vehicle seat upholstery. Cosatto cannot be held responsible for damage or marking to vehicle seat upholstery.
Security is only guaranteed if the child car seat is fitted in accordance with these nstructions.
Safely secure any luggage or other objects that might cause injuries to the occupant of the child car seat in the event of a collision.
Failure to comply with the instructions would be dangerous, and will automatically void the warranty and exempt Cosatto from any liability.
The harness buckle has been designed to be released quickly in an emergency. IT IS NOT CHILD PROOF. More inquisitive children may learn to undo the buckle. Children should be told never to play with the harness buckle or any other part of the child car seat.
It is important that the lap harness is worn low down, so that the pelvis of the child is firmly engaged.
Never use the child car seat without its fabric cover because the fabric cover constitutes as an integral part of the child car seat performance. The fabric cover should not be replaced with any other than the ones recommended by Cosatto.
Cover the child car seat if it is left in direct sun light for prolonged period as the child car seat base surfaces may get very hot. Check the child car seat surface before placing your child in the seat.

Notice

This is an i-Size Enhanced Child Restraint System. It is approved according to Regulation No.129, for use in, i-Size compatible vehicle seating positions as indicated by vehicle manufacturers in the vehicle users’ manual.
Never use this child car seat on passenger seat fitted with an active airbag is installed.
If in doubt, consult either the child restraint manufacturer or retailer.

Care & Maintenance

Your child restraint system has been designed to meet safety standards and with correct use and maintenance will give many years of trouble free performance.
Store your child restraint system in a dry, safe place.
Storing a damp child restraint system will encourage mildew to form, so after exposure to damp conditions, dry off with a soft cloth and allow to dry thoroughly before storing.
Avoid leaving the child restraint system in sunlight for prolonged periods as this may cause fabrics to fade.
Inspect the child restraint system regularly for signs of damage- stop using the product damage is found.
DO NOT take apart, or attempt to take apart the child restraint system when cleaning. It is unnecessary and dangerous to do so.
Plastic and metal parts may be sponged clean with warm water and a mild detergent.
Refer to the wash care on soft goods for cleaning instruction.
Remove insert from seat cover/ seat liner prior to cleaning.
Never clean with abrasive, ammonia based, bleach based or spirit type cleaners

Visual language Key

| AReferto warning XX
---|---
| Correct action
| XIn correct action
| Audible sound
| Repeat action x times
| General action arrow
| Lock
| Unlock
| Press and hold
| Check
| Continue to step XX
| Repeat on other side

Part List

**Please refer to diagrams:

**

P1: Lower seat liner P7: ISOFIX guide (x2)
P2: Crotch pad P8: Harness
P3: Chest pads (pair) P9: Tuck in tool
P4: Upper seat liner P10: ISOFIX arm
P5: Headrest cover P11: Support-leg
P6: Seat cover P12: Storage Compartment

Replacement Parts

The replacement parts shown below are available for your product. For UK & Ireland customers, order through our website: http://www.cosatto.com/service- centre/spares For customer outside UK & Ireland, contact information for your local distributor can be found on http://www.cosatto.com/stockists

If you require any further assistance, please contact us at cuddle@cosatto.com

S1: Lower seat liner S6: Seat cover
S2: Crotch pad S7: Wedge
S3: Chest pads (pair) S8: ISOFIX guide (set)
S4: Upper seat liner S9: Harness
S5: Headrest cover S10: Tuck in too

Fitting & Operation Information

Please refer to the following diagrams:

Harness

Adjusting the crotch strap position:
Loosening:
NOTE: Pull only the harness straps.
Tightening:
NOTE: The harness must be reasonably tight. It should restrain but not make the child uncomfortable. Check that the straps are not twisted while the child is seated.
Opening:
Closing:
Headrest:
Adjusting:
Satisfactory shoulder strap position:
Seat unit:
Adjusting the recline position:
Press and hold the seat recline adjustment button (a) then recline the seat (b).
IMPORTANT: Only use the specified recline position(s) for each mode:
Rearward facing mode: R
Forwarding facing mode: 4, 3, 2 & 1
Adjusting the seat orientation:
Pull and hold the seat rotate adjustment lever (a) then rotate the seat (b).
Seat positions:
B, C: Sideward facing position:
The sideward facing position allow access for placing or removing a child from the seat unit after the car seat is fitted.
WARNING: Do Not travel with the seat unit in this position.
D: Rearward facing position:
IMPORTANT – DO NOT USE FORWARD FACING BEFORE THE CHILD’S AGE EXCEEDS 15 MONTHS.
When use as a rearward facing child car seat, the car seat is suitable from birth, height between 40 and 105 cm, up to maximum weight of 18 kg.
A: Forward facing position:
When use as a forward facing child car seat, the car seat is suitable from 9 kg, height between 76 and 105 cm, up to maximum weight of 18 kg.
Seat liner:
When your child’s height is below 60 cm, the child car seat must be used WITH the seat liners and wedge. When your child’s height excess 60 cm, the child car seat can be used WITHOUT the seat liners and the wedge.
Side impact protection block:
Opening:
Closing:
Securing your child in the child car seat:
Open the harness (a), (refer to step 4). Raise the headrest (b), (refer to step 6).
Place your child in the child car seat. Close the harness (a), (refer to step 5). Adjust the headrest (b), (refer to step 6). Tighten the harness (c), (refer to step 3). Location:
Refer to the vehicle list for information of where the child car seat will fit in your vehicle.
IMPORTANT: Always fit your child car seat to the vehicle BEFORE your child secured to the seat. Fitting the child car seat to your vehicle:
Open the ISOFIX support-leg (a).
The two ISOFIX low anchorage anchor points are usually located between the vehicle seat base and back (a). Some vehicles have ISOFIX indicator near the ISOFIX low anchorage anchor points (b).
ISOFIX guide (optional):
The ISOFIX guides can help identify the vehicle ISOFIX anchor points and make installation easier. They can also help with the protection of your vehicle seat.
Press and hold ISOFIX arm adjustment buttons and extended the arms fully (a). Engage the ISOFIX arms (b) and ensure that the ISOFIX arm security indicators are green (c). Push the base back until it rests firmly against the vehicle seat backrest (d). Removal is a reversal of this procedure.
Adjust the support-leg (a) until it makes firm contact with vehicle floor (b) and the support-leg contact indicator is green (c). Removing softgoods:
If fitted, remove both the upper seat liner and the lower seat liner. Unfasten the rear zip to access the rear compartment door (a). Open the rear compartment door (b). Disconnect the chest pad connector rod (c & d).
Remove the chest pads (a) & crotch pad (b).
Unfasten the shoulder straps from headrest fabric cover slots (a). Disconnect the elastic loops from the headrest hooks (b). Remove the headrest fabric cover (c).
Disconnect the elastic loops from the front of the seat fabric cover (a). Release the fabric around adjustor strap cover (b). Release the fabric from the buckle (c).
Disconnect the elastic loops from the side plastic covers (a). Release the fabric around side impact protection blocks (b). Open the seat fabric cover flap fully (c) then lift the seat fabric cover away from seat unit (d).
Tuck in tool:
Using the tuck in tool:

Checklist

Have you check the compatibility of the child car seat with the intended vehicle?
If applicable, is the air-bag de-activated?
Is your child car seat correctly fitted to the vehicle seat?
Have you check the safety indicators on ISOFIX arms, ISOFIX support-leg?
Is your child correctly secure in the child car seat?
Is harness adequately tensioned and not twisted?