dals DCP-FLD30 30W Horizon LED Flood Light Installation Guide

: June 9, 2024
: dals

Table of Contents

ITEMS INCLUDED IN THE BOX
WARRANTY
Installation guide
- BEFORE YOU START
Installation with ground stake
Installation with the “L” bracket
Mounting template
FCC COMPLIANCE
- FCC STATEMENT
IC COMPLIANCE
Customer Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

dals DCP-FLD30 30W Horizon LED Flood Light

Items Included In The Box

MODEL/ MODELE| WATTS| LUMENS| KELVIN| INPUT/ ENTREE| DIMMABLE’
---|---|---|---|---|---
DCP – FLD30| 30W| 30001m| RGB + CCT 2200-4000K| 24VDC| ✔

Dais Connect App™

Landscape transformer, model DCP-TR60-BK, DCP-TR200-BK or DCP-PTR36 is required for installation. Sold separately.

ITEMS INCLUDED IN THE BOX

❶ 30W LED landscape floodlight
Items Included In The Box
❷ 6″ ground stake / Nut

Items Included In The Box
❸ 6″ T -connector

Items Included In The Box
❹ 6′ Extension cable

COMPATIBLE ACCESSORIES (SOLD SEPARATELY)

DCP-TR60-BK: Transformer I
DCP-TR200-BK: Transformer I
DCP-PTR36: Plug-in driver
DCP-ACC-MS12 : Metal ground stake 12″
DCP-ACC-MS06 : 6″ metal stake
DCP-ACC-MB: Mounting bracket
DCP-EXT20FT: 20′ extension cable
DCP-EXT6FT: 6′ extension cable
DCP-EXT-T: 6″ T-connector

WARRANTY

DALS offers a 5 year warranty from the date of purchase which covers repairs or replacements of defective parts of the housing, optics, and electronics. To contact DALS customer service call 1 an 430 1818 or send an e-mail to info@dals.com.

Installation guide

BEFORE YOU START

BEFORE STARTING INSTALLATION, SHUT THE LINE FEED POWER OFF USING THE CIRCUIT BREAKER. Instructions pertaining to a risk of fire, electric shock or injury to persons. Installation must be done according to local electrical codes. Installation should be done by a certified electrician.

Installation with ground stake

Make sure the power to the transformer is turned off.

**2*** Remove the fixture body for an easier access to the “L” support.
Position the “L” support bracket onto the stake and tighten the nut.
Make the connections and then, with your foot, insert the stake into the ground.
Rotate the fixture body to the desired orientation. Secure with the adjustment wheel.
Turn the power back on.

Installation with the “L” bracket

Remove the fixture body for an easier access to the “L” support.
Screw the “L” support on the surface by using the two slots. (Screws not included)
Screws not included

Mounting template

| Dals Connect
To pair your product, follow the steps on the App Pour connecter
---|---

FCC COMPLIANCE

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation

IC COMPLIANCE

CANICES-5(“)/NMB-5(“)
Industry Canada Notice
This device contains licence-exempt transmitter(a)/receiver(a) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(a). Operation la subject to the following two conditions:
(1) This device may not cause Interference.
(2) This device must accept any Interference, Including Interference that may cause undesired operation of the device.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

ISED RF Exposure statement
This equipment complies with ISED radiation exposure limits sat forth for an uncontrolled environment. In order to avoid the possibility of exceeding the ISED radio frequency exposure limits,
Human proximity to the antenna shall not be less than 20cm (7.9 Inches) during normal operation

Download the free Dais Connect app

WET LOCATION

| | |
---|---|---|---
|