Tronsmart T2 Plus Wireless Speaker User Manual

Tronsmart T2 Plus Wireless Speaker

Specifications

• Power ON/OFF; Voice assistant
• Music playing mode; TWS pairing
• Play/Pause; Hands-free phone call; Bluetooth disconnect; Reset
• Volume +; Next track
• Volume -; Previous track
• LED indicator
• TF/Micro SD card slot
• USB-C charging port
• AUX-IN port

Package Content

• 1 x Element T2 Plus wireless speaker
• 1 x USB charging cable
• 1 x 3.5mm audio cable
• 1 x Lanyard
• 1 x Warranty card
• 1 x User manual

How To Use

1. Turn ON/OFF

To turn on the speaker, press the power button. To turn off the speaker, press and hold the power button until it powers off.

2. Bluetooth Connection

To connect the speaker to your device via Bluetooth:

1. Turn on the speaker.
2. On your device, go to Bluetooth settings.
3. Search for ‘Tronsmart Element T2 Plus’ and click to connect.

The LED indicator will show different colors to indicate the connection status:

• Flashing blue: Bluetooth pairing mode
• Stable blue: Connected to a device successfully

3. Pair Two T2 Plus

To pair two T2 Plus speakers for True Wireless Stereo:

1. Turn on both speakers.
2. They will automatically enter True Wireless Stereo pairing mode
3. If the speakers do not pair automatically, hold the ‘M’ button for 3 seconds on either speaker to enter True Wireless Stereo pairing mode.
4. After successful pairing, you’ll hear a sound prompt and one
   speaker’s blue indicator will flash while the other speaker’s indicator will stay blue.

The LED indicator will show different colors to indicate the pairing status:

• Flashing blue: True Wireless Stereo pairing mode
• Stable & flashing blue: Connected to True Wireless Stereo mode
• Stable blue: Connected to a device

4. Disconnect Two T2 Plus

To disconnect two T2 Plus speakers from each other, hold the ‘M’ button for 3 seconds.

5. NFC Streaming

To use NFC streaming:

1. Ensure Bluetooth and NFC functions are enabled on your device.
2. Place the device on the NFC area of the speaker to pair automatically.
3. To disconnect NFC streaming, place the device back on the NFC area again.

Thank you for purchasing the Tronsmart Element T2 Plus Wireless Speaker. Please read the user manual before use and keep it handy for future reference. If you have trouble understanding or following the instructions in this manual, please contact our customer support team directly at support@tronsmart.com.

Package Content

• 1 x Element T2 Plus wireless speaker
• 1 x USB charging cable
• 1 x 3.5mm audio cable
• 1 x Lanyard
• 1 x Warranty card
• 1 x User manual

Overview

1. Power ON/OFF; Voice assistant
2. Music playing mode; TWS pairing
3. Play/Pause; Hands-free phone call; Bluetooth disconnect; Reset
4. Volume +; Next track
5. Volume -; Previous track
6. LED indicator
7. TF/Micro SD card slot
8. USB-C charging port
9. AUX-IN port

How To Use

1. Turn ON/OFF
2. Bluetooth Connection
   Turn on the speaker, turn on your device’s Bluetooth setting, search for ‘Tronsmart Element T2 Plus’ and click to connect.

Flashing blue / Bluetooth pairing mode

• Stable blue / Connected to a device successfully

Pair Two T2 Plus

• Turn on both speakers and they will automatically enter True Wireless Stereo pairing mode
• If two speakers do not pair with each other automatically, you can hold ‘M’ button for 3 seconds of either speaker and then they will enter True Wireless Stereo pairing mode.
• After two speakers have paired with each other successfully, you’ll hear a sound prompt and the blue indicator of one speaker will flash while the other one will stay blue.

Flashing blue  / True Wireless Stereo pairing mode

Stable & flashing blue /  Connected to True Wireless Stereo mode

Pair the speaker with your device.

Stable blue  / Connected to a device

Enjoy stereo surround music with two Element T2 Plus.

Disconnect Two T2 Plus

Hold ‘M’ button for 3 seconds to disconnect two T2 Plus from each other.

NFC Streaming

Confirm Bluetooth & NFC functions are enabled on your device, and then put the device on the NFC area of the speaker to pair automatically. If you need to disconnect NFC streaming, put the device back to the area again to disconnect.

AUX-IN Mode

Simply connect the speaker with your non-Bluetooth device and the 3.5mm audio jack cable.
Note: Plugging in an audio cable will automatically switch to AUX mode. While using AUX mode, control audio playback via the connected device.

TF/Micro SD Card Mode

The speaker will play audio from your TF/Micro SD card when plugging the card into the slot.

Auto-power Off

The speaker will power off automatically after 10 minutes if it does not pair with any device via Bluetooth. When in low battery, the speaker will power off automatically as well.

Charging

Use the included USB cable to charge your T2 Plus and make sure it is fully charged before its first use.

Stable blue / Charging under Bluetooth connected condition

• Red & blue flash alternately:  Turn on & disconnect to any device
• Stable red:   Charging under turn on condition
• Off Fully: charged

Note: It’s recommended to charge the speaker after turning it off as to maintain the battery life.

How to connect the speaker to Amazon Echo/Echo Dot?

1. Login the Alexa App, and finish the setting of the Echo/Echo Dot (if you haven’t set it up).
2. Connect the Echo/Echo Dot to WiFi successfully.
3. Then tap “Home / Settings / Your Echo’s (Echo Dot’s) Name / Bluetooth / Pair A New Device”. You will get to the interface “Bluetooth Setup”, and see the reminder “Please make sure your device is in pairing mode”. Find and tap “Tronsmart Element T2 Plus” from the list and wait for the pairing process complete. After completed, you can command your speaker via Alexa.

Note: Confirm you have turned on the speaker and it is under Bluetooth searching and pairing mode, or you can not find the device on the Bluetooth list.

| Power ON/OFF: Hold for 3 seconds.
---|---
Voice Assistant: Tap once to access your personal assistant

from your mobile device.

Hold for 8 seconds to power off forcedly if the speaker malfunctions.
| Tap to switch music playing mode between Bluetooth, AUX- IN and Micro SD card.
TWS pairing
| Play/Pause: Tap to play and pause the music.
Answer/End a phone call: During an incoming call, tap to answer or hang up a phone call.
Reject a phone call: During an incoming call, hold for 3 seconds to reject a phone call.
Redial: During Bluetooth connected mode, double tap twice to redial the last dialed-out number.
Bluetooth disconnect: Hold for 3 seconds to disconnect Bluetooth.
Reset: Hold for 8 seconds to reset to factory default settings.
| Volume +: Tap to increase the volume.
Next track: Hold to choose next track.
| Volume -: Tap to decrease the volume.
Previous track: Hold to choose previous track.

Specifications

Care & Maintenance

Do not use any form of detergents or cleaning material to clean the product as any type of chemical may make this device unusable. Do not disassemble this product. It contains no user serviceable parts. Do not drop or jump on it and treat it with care for the best performance. Keep the product in a dry location. Dust, dirt & moisture from humidity can accumulate on the body of the product if kept at an unfriendly place. Do not dispose this product in fire or batteries may explode or leak.

Warranty Information

Your ‘Tronsmart Element T2 Plus’, is warranted to the original owner for 12 months from the date of purchase against defects in material and workmanship under normal use and service. Tronsmart is not responsible for the accidental use of this product and its liability will not exceed the purchase price of the product. If you have any problems while using the product, please do not hesitate to contact our customer support team at support@tronsmart.com.

FCC STATEMENT

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement

This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>