PROGRESS LIGHTING P560338 2-Light Medium Outdoor Lantern Instruction Manual
- June 9, 2024
- PROGRESS LIGHTING
Table of Contents
P560338 2-Light Medium Outdoor Lantern
Instruction Manual P560338
2-LT MEDIUM OUTDOOR LANTERN
P560339
3-LT LARGE OUTDOOR LANTERN
P560338 2-Light Medium Outdoor Lantern
PACKAGE CONTENTS
| PART | DESCRIPTION | QUANTITY |
|---|---|---|
| A | Fixture | 1 |
HARDWARE CONTENTS
(not actual size) 
Safety Information
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
CAUTION: Read instructions carefully and turn electricity off at main
circuit breaker panel before beginning installation.
CAUTION: Risk of fire. Min. 90°C supply conductors. Consult a qualified
electrician t o ensure correct branch circuit conductor.
WARNING: If any Special Control Devices are used with this fixture,
follow instructions carefully t o assure full compliance with N.E.C.
requirements. If there are any questions, contact a qualified electrical
contractor.
CAUTION: All glass is fragile. Use care when handling glass shades and
bulbs.
WARNING – To comply with the National Electrical Code and Underwriters
Laboratories requirements, when installed outdoors, or in wet locations, the
edge of the wall plate coming i n contact with the mounting surface, must be
sealed with a latex waterproof caulking t o prevent water from entering the
outlet box.
Preparation
- Before beginning installation, make sure all parts are included using the contents diagrams from page 1.If any part is missing o r damaged, do not attempt t o assemble, install or operate the product.
- Estimated assembly time: 30 minutes.
- Tools required for assembly (not included): Phillips screwdriver, pliers, wire stripper, safety glasses, electrical tape, ladder.
Care and Maintenance
Shut off main power supply before cleaning product o r changing light bulbs. To clean, wipe with damp cloth. Do not use abrasive cleaners or cleaners that contain alcohol.
Assembly Instructions
1. Attach back plate (CC) t o the outlet box using the mounting screws
supplied with the outlet box (not provided). Tighten securely. 
Strip 3/8” o f insulation from the electrical wire ends.
Using wire nuts (BB), connect the WHITE fixture wire t o the WHITE supply wire
from the outlet box; connect the BLACK fixture wire t o the BLACK supply wire
from the outlet box. Connect the fixture
ground wire and supply ground wire using a wire nut or by fastening t o the
ground screw on the metal back plate. Push all of the wire connections
carefully into the outlet box.
3 . Attach the fixture (A) t o the back plate and using the flat screw (DD), tighten the fixture against the mounting surface.
4. Thread the lamp (not included) into the fixture socket.
Use 60-watt MAX incandescent candelabra base, SBCFL or SBLED.
WARRANTY AND EXCLUSIVE REMEDY:
Progress products, when properly installed and under normal conditions of use,
are warranted to our customers only to be free from defects i n material and
workmanship a t time of shipment. All warranty claims must be asserted within
one year from date of purchase of the subject items; thereafter, warranty
claims will not be honored. Customers’ sole remedy for a warranty claim or
otherwise shall be limited to repair or replacement of the subject product if
it i s shown to have been defective in material or workmanship at time of
shipment. Progress’s sole and maximum liability for a defective product shall
never exceed the cost of the subject product. EXCEPT FOR SUCH A WARRANTY AND
EXCLUSIVE REMEDY AS STATED (AND THE EXPRESS WARRANTY OF TITLE), WE DISCLAIM
ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, AND SPECIFICALLY DISCLAIM
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT SHALL WE BE LIABLE TO CUSTOMER IN WARRANTY, CONTRACT,
NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, FOR ANY DAMAGES, WHETHER INCIDENTAL
OR CONSEQUENTIAL, WHICH ARE ALLEGED TO BE CAUSED BY ONE OR MORE OF OUR
PRODUCTS, BEYOND THE COST TO THE CUSTOMER OF THE SUBJECT PRODUCT OR PRODUCTS.
Therefore, the customer’s sole and exclusive remedy against us for breach of
the warranty, breach of contract or negligence or strict liability or
otherwise shall be limited to repair or replacement of the subject product at
our option (excluding installation and removal charges which shall not be our
liability) or, if we choose, refund of the purchase price. I n no case does
our warranty and exclusive remedy extend to anybody other than our customers.
Our customers are not authorized to extend warranties or remedies on our
behalf to anyone. Such unauthorized extensions of warranties or remedies by
the customer shall remain customer’s responsibility. Customer i s responsible
for determining the suitability of our products for customer’s use or resale,
or for incorporating them into objects or for applications which
customer designs, assembles, constructs or manufactures.
THANK YOU for selecting Progress Lighting
We can assist you with questions regarding product information, assembly o r
missing parts
800-447-0 573 v8am-8pm (Eastern), Monday-Friday
customerservice@progresslighting.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>