JOY-iT SEN-HM3301 Fine Dust Sensor User Manual

: June 9, 2024
: JOY-It

Table of Contents

GENERAL INFORMATION
USAGE WITH ARDUINO
OTHER INFORMATION
SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SEN-HM3301 Fine Dust Sensor
User Manual JOY iT SEN HM3301 Fine Dust Sensor FINE DUST SENSOR
SEN-HM3301

GENERAL INFORMATION

Dear customer,
thank you very much for choosing our product.
In following, we will introduce you to what to observe while starting up and using this product.
Should you encounter any unexpected problems during use, please do not hesitate to contact us.

USAGE WITH ARDUINO

2.1 Connection

JOY iT SEN HM3301 Fine Dust Sensor - fig

Arduino	HM3301
GND	GND

D19
(SCL)| SCL
D18
(SDA)| SDA
5V| 5V

2.2 Code example
This fine dust sensor can be operated utilizing the Seeed_PM2_5_sensor_HM3301 , which was published by Seeed Studio under the MIT license. After installing this library in your Arduino IDE, you can find the code example basic_demo under File → Examples → Grove – Laser PM2.5 Sensor HM3301. You can upload this code sample using Upload. Before doing so, however, make sure that the Port and Board are set correctly under Tools.

OTHER INFORMATION

Our information and take-back obligations according to the Electrical and Electronic Equipment Act (ElektroG)
Symbol on electrical and electronic equipment:
This crossed-out dustbin means that electrical and electronic appliances do not belong in the household waste. You must return the old appliances to a collection point. Before handing over waste batteries and accumulators that are not enclosed by waste equipment must be separated from it.
Return options:
As an end user, you can return your old device (which essentially fulfils the same function as the new device purchased from us) free of charge for disposal when you purchase a new device.
Small appliances with no external dimensions greater than 25 cm can be disposed of in normal household quantities independently of the purchase of a new appliance. Possibility of return at our company location during opening hours:
SIMAC Electronics GmbH, Pascalstr. 8, D-47506 Neukirchen-Vluyn, Germany
Possibility of return in your area:
We will send you a parcel stamp with which you can return the device to us free of charge. Please contact us by email at Service@joy- it.net or by telephone.
Information on packaging:
If you do not have suitable packaging material or do not wish to use your own, please contact us and we will send you suitable packaging.

SUPPORT

If there are still any issues pending or problems arising after your purchase, we will support you by e-mail, telephone and with our ticket support system.
Email: service@joy-it.net
Ticket system: http://support.joy-it.net
Telephone: +49 (0)2845 9360-50 (10-17 o‘clock)
For further information please visit our website: www.joy-it.net

Published: 04.07.2022
www.joy-it.net
SIMAC Electronics GmbH
Pascalstr. 8, 47506 Neukirchen-Vluyn