PROGRESS LIGHTING P500411 4-Light Matte Black Farmhouse Clear Glass Cylinder Led Instruction Manual
- June 9, 2024
- PROGRESS LIGHTING
Table of Contents
PROGRESS LIGHTING P500411 4-Light Matte Black Farmhouse Clear Glass
Cylinder Led Instruction Manual
Package Contents
PART | DESCRIPTION | QUANTITY |
---|---|---|
A | Fixture | 1 |
B | Glass Shade | 4 |
C | Socket Ring | 4 |
D | Chain Loop | 1 |
E | Tubing Ring | 1 |
Hardware Contents( not actual size)
-
Hex Nut
-
Wire Nut
-
Mounting Strap (1/8 Ip)
-
Screw Collar
-
Chain (48”)
-
Nipple (1/8IP)
-
Chain(48”)
-
Canopy
-
Quick Link
THANK YOU for selecting Progress Lighting.
We can assist you with questions regarding product information, assembly or missing parts.
Safety Information
Please read and understand this entire manual before attempting to assemble, operate or instal the product.
CAUTION:
Read instructions carefully and turn electricity off at main circuit breaker
panel before beginning installation.
CAUTION:
Risk of fire. Min. 90°C supply conductors. Consult a qualified electridan to
ensure correct branch circuit conductor.
WARNING:
If any Special Control Devices are used with this Wore, follow instructions
carefully to assure full compliance with N.E.C. requirements. If there are any
questions, contact a qualified electrical contractor.
CAUTION:
All glass is fragile. Use care when handling glass shades and bulbs.
Preparation
- Before beginning installation, make sure all parts are included using the contents diagrams from page 1.11 any part is missing or damaged. do not attempt to assemble. Install or operate the product.
- Estimated assembly time: 30 minutes.
- Tools required for assembly (not included): Phillips screwdriver, pliers, wire stdpper, safety glasses, electrical tape. ladder.
Care and Maintenance
Shut off main power supply before cleaning product or changing light bulbs. To clean. wipe with damp cloth. Do not use abrasive cleaners or cleaners that contain alcohol.
Assembly Instructions
-
Install the chain holder (EE) onto the nipple (FF). Next, loosely thread the hex nuts (AA) onto the nipple (FF) and then thread this assembly onto the mounting strap (CC). Install this assembly to the outlet box using the mounting screws supplied with the outlet box (not included).
-
In this step, you will adjust the depth of the chain holder in relation to the canopy depth.
Take the canopy (HH) and slip it over the chain holder (EE). You will need to adjust the chain holder so at least 1/4″ of the threaded portion is exposed through the canopy hole. This is done by adjusting the depth of the nipple (FF) on the mounting strap (CC). When the chain holder (EE) is correctly adjusted, remove the canopy (HH) and tighten the top hex nut (M) against the mounting strap (CC) and the bottom hex nut (AA) against the chain holder (EE).- Thread Nipple up & down for Adjustment **
ASSEMBLY INSTRUCTION
- Thread Nipple up & down for Adjustment **
-
Equally adjust the arms by carefully turning them out from the center. Put the tubing ring (E) on the fixture hooks (A).
Pass the wires through the chain loop (D). Attach the chain loop (D) onto the fixture (A) , secure it tightly .
NOTE:
During this step, determine the hanging length of your fixture by removing
chain links (66) and optionally cutting the electrical and ground wire to
length.
Do NOT cut electrical or ground wires until this overall length is determined.
Leave AT LEAST 6 inches MINIMUM of wire past the chain holder (EE) to allow
for easy connections in step 5.
(Chain links can be spread open with 2 pairs of pliers. Twist the split link
ends in opposite directions and close by squeezing them back together.)
-
Once hanging length is determined, open chain link at one end of chain (GG). Hook the open chain ink (GG) onto the chain loop (D). Close the chain links back together with the pliers. open the quick link 11), attach chain link the other end of chain (GG) and chain holder (EE) onto the quick link (ii). Close the quick link.
You can now weave the wires through every third chain link (GG). Continue to pass the wires AND chain through the screw collar (DD) and canopy (HH).
-
Strip 3/8″ of insulation from the electrical wire ends. Using wire nuts (BB), connect the RIBBED fixture wire to the WHITE supply wire from the outlet box; connect the SMOOTH fixture wire to the BLACK supply wire. Connect the fixture ground wire and supply ground wire using a wire nut or by fastening to the ground screw on the mounting strap. Push all wire connections into the outlet box.
-
Tuck the wires into the Junction box and slip the canopy (HH) over the chain holder. Thread the screw collar (DD) onto the chain holder to secure the canopy tightly to the ceiling.
-
Attach the glass shade (B) to the fixture (A) using the socket ring (C) to secure It tightly.
Thread lamps (not included) into the fixture sockets. Use 60-watt MAX incandescent medium base lamps, SBCFL or SBLED.
WARRANTY AND EXCLUSIVE REMEDY:
Progress products, when properly installed and under normal conditions of use,
are warranted to our customers only to be free from defects in material and
workmanship at time of shipment. All warranty claims must be asserted within
one year from date of purchase of the subject items; thereafter, warranty
claims will not be honored. Customers’ sole remedy for a warranty claim or
otherwise shall be limited to repair or replacement of the subject product if
it is shown to have been defective in material or workmanship at time of
shipment. Progress’s sole and maximum liability for a defective product shall
never exceed the cost of the subject product. EXCEPT FOR SUCH A WARRANTY AND
EXCLUSIVE REMEDY AS STATED (AND THE EXPRESS WARRANTY OF TITLE), WE DISCLAIM
ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED, AND SPECIFICALLY DISCLAIM
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT SHALL WE BE LIABLE TO CUSTOMER IN WARRANTY, CONTRACT,
NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, FOR ANY DAMAGES, WHETHER INCIDENTAL
OR CONSEQUENTIAL, WHICH ARE ALLEGED TO BE CAUSED BY ONE OR MORE OF OUR
PRODUCTS, BEYOND THE COST TO THE CUSTOMER OF THE SUBJECT PRODUCT OR
PRODUCTS.
Therefore, the customer’s sole and exclusive remedy against us for breach of the warranty, breach of contract or negligence or strict liability or otherwise shall be limited to repair or replacement of the subject product at our option (excluding installation and removal charges which shall not be our liability) or, if we choose, refund of the purchase price. In no case does our warranty and exclusive remedy extend to anybody other than our customers. Our customers are not authorized to extend warranties or remedies on our behalf to anyone. Such unauthorized extensions of warranties or remedies by the customer shall remain customer’s responsibility. Customer is responsible for determining the suitability of our products for customer’s use or resale, or for incorporating them into objects or for applications which customer designs, assembles, constructs or manufactures.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>