LA CROSSE TECHNOLOGY 513-63867V2 Executive Atomic Clock User Manual

LA CROSSE TECHNOLOGY 513-63867V2 Executive Atomic Clock

MODEL: 513-63867V2
DC : 080422

For more product information visit : bit.ly/laxtech_support

POWER UP

1. Install 2 “AA” batteries into your Outdoor Sensor.
2. Install 6 “AA” batteries into your Atomic Clock.
3. Once the sensor is reading to your clock, place it outside in a shaded location to protect it from the sun’s heat.

See our mounting information: bit.ly/temp_mounting

WWVB ATOMIC TIME SIGNAL

• The station will automatically search for the Atomic Time Signal at power up and again at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
• Press and release the button to manually search for the WWVB Atomic Time Signal.
•  The Tower Icon will flash while searching, and be solid on screen when the signal is received.
• For information about WWVB Atomic Time visit: http://bit.ly/AtomicTime

SETTINGS

1. Hold the button to enter the Settings Menu.
2. Use the + or – button to adjust values.
3. Press the button to confirm and move to next item.
4. Press the F/C button at any time to exit.

Settings order:

• Language (English, Spanish, French, German)
• Beep ON/OFF
• Atomic ON/OFF
• DST AUTOMATIC / DST ALWAYS OFF / DST ALWAYS ON  (Change Spring/Fall) (No change in Spring) (No change in Fall)
• Time Zone
• 12/24 Format
• Hour
• Minutes
• Year
• Month
• Date
• Month/Date or Date/Month

TIME ZONE

• ATLANTIC
• EASTERN
• CENTRAL
• MOUNTAIN
• PACIFIC
• ALASKA
• HAWAII

Notes:

• The language selected in this menu will adjust the Weekday readout and menu items.
• If “Atomic OFF: is selected, menu will skip DST and Time Zone settings and move straight to the 12/24 Hour Format setting.
• Weekday sets automatically when Year, Month and Date are set.

FAHRENHEIT/CELSIUS SELECTION

Press the ºF/ºC button to select Fahrenheit or Celsius Temperature display.

DESIRED HOUR (TIME ADJUST)
Have your clock match other times around the world by setting a Desired Hour, kept accurate by the Atomic time signal.

Note : only the hour can be changed

Set Desired Hour:

1. Hold the button until the Hour flashes, “Desired Hour” will show.
2. Press the + (PLUS) button to adjust the hour. Press the – (MINUS) button to reset hour to “Local Time”.
3. Press the button to confirm and exit.

Switch between Desired Time and Local time:

• Press the button to switch between Desired Time and Local Time.
• Desired Time is indicated with the icon

CALENDAR DISPLAY OPTIONS

Press the button to change how the Calendar is displayed. Full Weekday, Month/Date/Year, Weekday/Month/Date.

CUSTOM TIME/TEMPERATURE DISPLAY

Press the button to adjust the data displayed on screen.

• Current Time/Indoor Temp
  • Current Time/Outdoor Temp
• Desired Time/Indoor Temp
  • Outdoor Temp/Desired Time
• Indoor Temp/Desired Time
  • Auto-Scroll

When the Auto-scroll Icon is showing, the clock will switch between these options every 5 seconds.

• Current Time
• Desired Time
• Temperature

SEARCH FOR OUTDOOR SENSOR

If you are seeing NO or dashes for your outdoor readings, please try the following steps:

1. Hold the Plus (+) button to search for your outdoor sensor. The Reception Indicator will begin to animate.
2. If after 3 minutes the sensor still isn’t connected, bring the sensor inside next to the display and remove batteries from both the sensor and clock.
3. Press any button on the clock 20 times and leave the parts sit for a few moments with the power off.
4. Install a new set of alkaline batteries into the sensor, then into your clock.

For additional help visit : bit.ly/basic_restart

WE’RE HERE TO HELP!
If you require additional support, get in touch with our friendly customer support team based out of La Crosse, WI.

• Phone : 1-608-782-1610
• Online : bit.ly/contact_techsupport

Our knowledgeable customer support team is available: Monday-Friday, 8am- 6pm CST

JOIN THE CONVERSATION
Ask questions, watch detailed setup videos, and provide feedback on our social media outlets

BUTTON FUNCTIONS

LOW BATTERY INDICATOR

• When Battery Icon appears in Outdoor Temperature section, replace batteries in your Outdoor Sensor.
• When Battery Icon appears in the Time section, replace batteries in your Clock.

SPECIFICATIONS

Atomic Clock (513-1429THv2):

• Temperature Range : 32°F to 122°F (0°C to 50°C)
• Humidity Range : 10% RH to 99% RH
• Power Requirements : 6 “AA” (LR6, IEC) batteries (not included)
• Battery Life : Over 24 months with reputable batteries.
• Dimensions : 17.44” L x 11.73” H x 1.22” W (44.3cm L x 29.8cm H x 3.1cm W)

Outdoor Sensor (TX141TH-Bv4)

• Temperature Range : -40°F to 140°F (-40°C to 60°C)
• Transmission Range : Over 330 ft. open air (100 meters) RF 433MHz
• Update Interval : About every 51 seconds
• Power : 2-AA, IEC, LR6 batteries (not included)
• Battery Life : Over 12 months
• Dimensions : 1.57” L x 0.79” W x 5.12” H (4.0 L x 2.0 W x 13.0 H cm)

WARRANTY INFO

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. La Crosse Technology, Ltd, 2830 S. 26th St., La Crosse, WI 54601 For Full Warranty Details, Visit: www.lacrossetechnology.com/pages/warranty

CARE + MAINTENANCE

• Do not mix old and new batteries.
• Do not mix Alkaline, Lithium, standard, or rechargeable batteries.
• Always purchase the correct size and grade of battery most suitable for intended use.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries have with correct polarity (+ / -).
• Remove batteries from equipment that will not to be used for an extended period.
• Promptly remove expired batteries.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

CAUTION!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or processed using electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim any responsibility for any technical error or printing error, or their consequences. All trademarks and patents are recognized.

WARNING : This product can expose you to chemicals including acrylonitrile, butadiene, and styrene, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to: www.P65Warnings.ca.gov

For more product information visit: bit.ly/laxtech_support

References

• Radio Station WWVB | NIST
• Manuals and FAQs – La Crosse Technology
• Warranty – La Crosse Technology
• P65Warnings.ca.gov

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>