CHAUVET PROFESSIONAL COLORdash Par-H7X LED Wash Light User Guide
- June 9, 2024
- Chauvet Professional
Table of Contents
- CHAUVET PROFESSIONAL COLORdash Par-H7X LED Wash Light
- About This Guide
- Disclaimer
- LIMITED WARRANTY
- Safety Notes
- FCC Compliance
- Contact
- What is Included
- AC Power
- AC Plug
- Power Linking
- Replacing the Fuse
- DMX Linking
- DMX Connection
- RDM (Remote Device Management)
- Mounting
- Mounting Diagram
- Control Panel Description
- Passcode
- Menu Map
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
CHAUVET PROFESSIONAL COLORdash Par-H7X LED Wash Light
About This Guide
The COLORdash Par-H7X Quick Reference Guide (QRG) has basic product information such as mounting, menu options, and DMX values. Download the User Manual from www.chauvetprofessional.com for more details.
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.
LIMITED WARRANTY
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR
WEBSITE.
For Customers in the United States and Mexico: www.chauvetlighting.com
/warranty-registration.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the
Netherlands, Luxembourg, France, and
Germany: www.chauvetlighting.eu/warranty-
registration.
Chauvet warrants that this product shall be free from defects in material and
workmanship under normal use, for the period specified in, and subject to the
exclusions and limitations set forth in the full limited warranty on our
website. This warranty extends only to the original purchaser of the product
and is not transferable. To exercise rights under this warranty, you must
provide proof of purchase in the form of an original sales receipt from an
authorized dealer that shows the product name and date of purchase. THERE ARE
NO OTHER EXPRESS OR IMPLIED WARRANTIES. This warranty gives you specific legal
rights. You may also have other rights that vary from state to state and
country to country. This warranty is valid only in the United States, United
Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France,
Germany and Mexico. For warranty terms in other countries, please consult your
local distributor.
Safety Notes
These Safety Notes include important information about installation, use, and maintenance.
- The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 20 in (0.5 m) is not expected.
- If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord exclusively available from the manufacturer or his service agent.
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
- The luminaire is intended for professional use only.
- DO NOT open this product. It contains no user-serviceable parts.
- To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via breaker or by unplugging it.
- DO NOT look at the light source when the product is on.
- CAUTION: This product’s housing may be hot when lights are operating. Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
- DO NOT leave any flammable material within 50 cm of this product while operating or connected to power.
- CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow product to fully acclimate to the surrounding environment before connecting it to power.
- USE a safety cable when mounting this product overhead.
- DO NOT operate this product outdoors or in any location where dust, excessive heat, water, or humidity may affect it. (IP20)
- DO NOT operate this product if the housing, lenses, or cables appear damaged.
- DO NOT connect this product to a dimmer or rheostat.
- ONLY connect this product to a grounded and protected circuit.
- ONLY use the hanging/mounting bracket to carry this product.
- In the event of a serious operating problem, stop using immediately.
- The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher temperatures.
- The minimum startup temperature is -4°F (-20°C). Do not start the product at lower temperatures.
- The minimum ambient temperature is -22°F (-30°C). Do not operate the product at lower temperatures.
FCC Compliance
This device complies with Part 15 Part B of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Contact
Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request support or return a product. Refer to Contact Us at the end of this QRG for contact information.
What is Included
- COLORdash Par-H7X
- Seetronic Powerkon IP65 power cable
- Gel frame holder
- Gel frame
- Quick Reference Guide
AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
AC Plug
Connection | Wire (U.S.) | Wire (Europe) | Screw Color |
---|---|---|---|
AC Live | Black | Brown | Yellow/Brass |
AC Neutral | White | Blue | Silver |
AC Ground | Green/Yellow | Green/Yellow | Green |
To eliminate unnecessary wear and improve its lifespan, during periods of non- use completely disconnect the product from power via breaker or by unplugging it.
Power Linking
It is possible to power link up to 16 COLORdash Par-H7X products at 100 V, 20 products at 120 V, 34 products at 208 V, 38 products at 230 V, or up to 39 products at 240 V. Never exceed this number. Power-linking cables can be purchased separately.
Replacing the Fuse
1. Disconnect the product from power.
2. Using a flat head screwdriver, unscrew the fuse holder cap from the
housing.
3. Remove blown fuse and replace with a good fuse of the same type and
rating.
4. Screw the fuse holder cap back in place and reconnect power.
DMX Linking
The COLORdash Par-H7X will work with a DMX controller using a 3- or 5-pin DMX serial connection. A DMX Primer is available from www.chauvetprofessional.com.
DMX Connection
The COLORdash Par-H7X uses a 3- or 5-pin DMX data connection for its DMX personalities: 6CH, 8CH, 9CH, 13CH, and 14CH. See the User Manual for information about connecting and configuring the product for DMX operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer as not all DMX controllers have this capability. The COLORdash Par-H7X supports RDM protocol that allows feedback to make changes to menu map options. Download the User Manual from www.chauvetprofessional.com for more details.
Mounting
Before mounting this product, read the Safety Notes. Make sure the mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to http://trusst.com/productcategory/truss- clamps.
Mounting Diagram
Control Panel Description
Button | Function |
---|---|
< MENU> | Exits from the current menu or function |
< ENTER> | Enables the currently displayed menu or sets the currently |
selected value into the selected function
< UP>| Navigates upwards through the menu list or increases the numeric
value when in a function
< DOWN>| Navigates downwards through the menu list or decreases the
numeric value when in a function
Passcode
When prompted, enter the following passcode:
Menu Map
Refer to the COLORdash Par-H7X product page on www.chauvetprofessional.com for the latest menu map.
Main Level | Programming Levels | Description |
---|---|---|
DMX Address | 001–507 | Sets the starting address |
DMX Channel
| 6CH| 6-channel: RGBAWUV
8CH| 8-channel: dimmer, RGBAWUV, strobe
9CH| 9-channel: 16-bit dimmer, RGBAWUV, strobe
13CH
| 13-channel: dimmer, RGBAWUV, strobe, color macro, color temperature, auto programs and speed, dimmer mode
14CH
| 14-channel: 16-bit dimmer, RGBAWUV, strobe, color macro, color temperature, auto programs and speed, dimmer mode
Static
|
Fixed Color
| R| Red
G| Green
B| Blue
A| Amber
W| White
UV| Ultraviolet (UV)
RG| Red/Green
RB| Red/Blue
RA| Red/Amber
RW| Red/White
RUV| Red/UV
GB| Green/Blue
GA| Green/Amber
GW| Green/White
GUV| Green/UV
BA| Blue/Amber
BW| Blue/White
BUV| Blue/UV
AW| Amber/White
AUV| Amber/UV
WUV| White/UV
RGB| Red/Green/Blue
RGA| Red/Green/Amber
RGW| Red/Green/White
RGUV| Red/Green/UV
RBA| Red/Blue/Amber
RBW| Red/Blue/White
RBUV| Red/Blue/UV
Main Level| Programming Levels| Description
---|---|---
Static
(cont.)
|
Fixed Color
(cont.)
| RAW| Red/Amber/White
RAUV| Red/Amber/UV
RWUV| Red/White/UV
GBA| Green/Blue/Amber
GBW| Green/Blue/White
GBUV| Green/Blue/UV
GAW| Green/Amber/White
GAUV| Green/Amber/UV
GWUV| Green/White/UV
BAW| Blue/Amber/White
BAUV| Blue/Amber/UV
BWUV| Blue/White/UV
AWUV| Amber/White/UV
RGBA| Red/Green/Blue/Amber
RGBW| Red/Green/Blue/White
RGBUV| Red/Green/Blue/UV
RGAW| Red/Green/Amber/White
RGAUV| Red/Green/Amber/UV
RGWUV| Red/Green/White/UV
RBAW| Red/Blue/Amber/White
RBAUV| Red/Blue/Amber/UV
RBWUV| Red/Blue/White/UV
RAWUV| Red/Amber/White/UV
GBAW| Green/Blue/Amber/White
GBAUV| Green/Blue/Amber/UV
GBWUV| Green/Blue/White/UV
GAWUV| Green/Amber/White/UV
BAWUV| Blue/Amber/White/UV
RGBAW| Red/Green/Blue/Amber/White
RGBAUV| Red/Green/Blue/Amber/UV
RGBWUV| Red/Green/Blue/White/UV
RGAWUV| Red/Green/Amber/White/UV
RBAWUV| Red/Blue/Amber/White/UV
GBAWUV| Green/Blue/Amber/White/UV
RGBAWUV| Red/Green/Blue/Amber/White/UV
Color Temperature
| Warm White 1|
Preset white color temperatures
Warm White 2
Warm White 3
Neutral White 1
Neutral White 2
Neutral White 3
Daylight 1
Daylight 2
Daylight3
Daylight 4
Main Level| Programming Levels| Description
---|---|---
Static
(cont.)
|
Manual Color Mixer
| Red|
000–255
|
Combine red, green, blue, amber, white, and ultraviolet to make a custom color (0– 100%)
Green
Blue
Amber
White
UV
Auto show| Auto 1–5| 001–100| Automatic programs and speed
Master/Slave| Master| DMX mode (Master)
Slave| Slave mode
Dimmer Mode| Off| Linear dimmer
Dimmer1–3| Dimmer speed, fast ( 1 ) to slow ( 3 )
White Balance
| Off| Uses factory default white setting
Manual
| Red|
125–255
| Sets maximum red value
Green| Sets maximum green value
Blue| Sets maximum blue value
Amber| Sets maximum amber value
White| Sets maximum white value
UV| Sets maximum UV value
LED Frequency
| 600Hz|
Sets the Pulse Width Modulation frequency
1200Hz
2000Hz
4000Hz
6000Hz
25kHz
Back Light
| 10S| Display turns off after 10 seconds
30S| Display turns off after 30 seconds
2Min| Display turns off after 2 minutes
Always On| Display stays on
Key Lock| On| Locks the display. Passcode: < UP>,
< DOWN>, < UP>, < DOWN>, < ENTER>
Off
Information
| Fixture Hours| < ____ H >| Shows hours product has been on
Version| < V __ >| Shows the current firmware version
UID| < >| Shows the product UID
Reset Factory| NO| Reset to factory default settings
YES
System Update
| Put the update file into the USB stick and connect it to the device through an adapter cable.|
Update firmware via USB to DMX adapter cable
NO
YES
DMX Values
6CH| 8CH| 9CH| 13CH| 14CH| Function| Value|
Percent/Setting
---|---|---|---|---|---|---|---
–| 1| 1| 1| 1| Dimmer| 000 ó 255| 0–100%
–| –| 2| –| 2| Fine dimmer| 000 ó 255| 0–100%
1| 2| 3| 2| 3| Red| 000 ó 255| 0–100%
2| 3| 4| 3| 4| Green| 000 ó 255| 0–100%
3| 4| 5| 4| 5| Blue| 000 ó 255| 0–100%
4| 5| 6| 5| 6| Amber| 000 ó 255| 0–100%
5| 6| 7| 6| 7| White| 000 ó 255| 0–100%
6CH| 8CH| 9CH| 13CH| 14CH| Function| Value|
Percent/Setting
---|---|---|---|---|---|---|---
6| 7| 8| 7| 8| Ultraviolet| 000 ó 255| 0–100%
–| 8| 9| 8| 9| Strobe| 000 ó 010
011 ó 255
| No function
Strobe, slow to fast
–
| ****
–
| ****
–
| ****
9
| ****
10
| ****
Color macro
| 000 ó 010
011
012 ó 029
030
031 ó 049
050
051 ó 069
070
071 ó 089
090
091 ó 109
110
111 ó 129
130
131 ó 149
150
151 ó 169
170
171 ó 200
201 ó 255
| No function Red full
Red full, green increases Red and green full
Green full, red decreases Green full
Green full, blue increases Green and blue full
Blue full, green decreases Blue full
Blue full, red increases Red and blue full
Red full, blue decreases Red full
Red full, green and blue increase Red, green, and blue full
Blue full, red and green decrease Blue full
Red, green, and blue full
Color temperature, warm to cool
–
| ****
–
| ****
–
| ****
10
| ****
11
| ****
Color temperature
| 000 ó 005
006 ó 025
026 ó 050
051 ó 075
076 ó 100
101 ó 125
126 ó 150
151 ó 175
176 ó 200
201 ó 225
226 ó 250
251 ó 255
| No function Warm white 1
Warm white 2
Warm white 3
Neutral white 1
Neutral white 2
Neutral white 3
Daylight 1
Daylight 2
Daylight 3
Daylight 4 No function
–
| ****
–
| ****
–
| ****
11
| ****
12
| ****
Automatic programs
| 000 ó 010
011 ó 060
061 ó 110
111 ó 160
161 ó 210
211 ó 255
| No function Automatic program 1
Automatic program 2
Automatic program 3
Automatic program 4
Automatic program 5
–| –| –| 12| 13| Program speed| 000 ó 255| Automatic program speed, slow to fast
–
| ****
–
| ****
–
| ****
13
| ****
14
| ****
Dimmer mode
| 000 ó 051
052 ó 101
102 ó 152
153 ó 203
204 ó 255
| Preset dimmer speed from display menu Linear dimmer
Dimmer mode 1 (fastest) Dimmer mode 2
Dimmer mode 3 (slowest)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>