ITC TL5000 Redwood Table Leg Instructions
- June 9, 2024
- ITC
Table of Contents
ITC TL5000 Redwood Table Leg Instructions
INSTALLATION INSTRUCTIONS
PARTS/TOOLS NEEDED:
-
Table Base
-
Floor Base
-
Table Leg
-
10 Phillips Oval Head Screws (not provided)
-
Power Drill (Not Provided)
INSTALLATION CONSIDERATIONS
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- Do not sit on or lean on table, intended for use as a table only.
-
Mount the floor base into solid floor structure (wood, fiberglass, etc.) using #10 phillips oval head screws.
-
Mount the table base onto table top (customer provided) using #10 phillips oval head screws. Make sure the weight of the table top is evenly supported over the table leg. The top of the table leg has a positive lock so the table will click in place.
-
To secure, slot the T piece into the base and rotate clockwise. Make sure the T-bolt is extended all the way down. To loosen, turn the leg counter-clockwise.
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
For warranty information please visit www.itc-us.com/warranty-return-policy
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>