Jeagop MF230053 2024 Gold Floor Lamps for Living Room User Manual

Jeagop MF230053 2024 Gold Floor Lamps for Living Room User Manual

Introduction

Thank you for choosing LED Floor Lamp.Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact us by email with your Amazon order number and details.

Package Contents

• 1 x LED Floor Lamp
• 5 x Iron Pipes
• 1 x Lamp Base
• 1 x User Manual
• 1 x Remote Controller
• 1 x Power Adapter with Cable

Characteristics

1. Brightness and color temperature ( CCT ) stemless adjusted.
2. Memory function, restore to the luminescence of last time close light when open light again, don’t need to repeat adjusting the light.
3. Adjustable lamp head.
4. Heavy base.
5. Professional eyes-protect light, which make up of no blue light harmful and no flicker LED, It is less harmful for longtime use.
6. The rendering of real colors. The color rendering index ( Ra ) of this lamp is more than 95, it is good for painter, designer and so on.

Product Structure

Specification

Touch control: 3000K-4000K-5000K-6000K
Lifespan| 50,000Hrs
Battery for Remote Controller| AAA battery x 2 not included
Remote Distance| Within 10M
Input Voltage| AC100-240V 50/60 Hz
Adapter Voltage| DC24V 0.5A
Product Size| 8.7″(D) x 69″(H)

Usage

There are two ways to control: Touch control or Remote control.

Touch control

Please touch the touch bar to control the lamp

• Turn ON:
  Short press the ” “button to turn on. Or short touch any place on the touch pad can turn on the lamp with the according brightness level.

• Adjust Color Temperature
  Short press the top touch area to change the color temperature 3000K – 4000K – 5000K 6000K.

• 1 Hour Timer Setting
  Long press the “ “button until the indicator light flash to set 1 Hour timer.

• “Brightness +/-“Setting:
  Slightly slide your fingers along the touch pad to set the brightness level. Also can be used as Turn on key.

• Turn OFF:
  Short press the “ ” button to turn off.

Remote Control

The remote distance is within 10M. It is magnetic so that you can put it on whatever contain iron, such as the iron pipe, patch and so on.

Set a 1h timer (Light get several flicker mean 1h timer is Successful set).
Short press to turn on/off light.
Short/Long press to enhance the CCT (3000K to 6000K) as you like.
Short/Long press to lower the CCT (6000K to 3000K) as you like.
Short/Long press to enhance the brightness as you like.
Short/Long press to lower the brightness as you like.
Short press to be the max brightness and CCT immediately.
Short press to enter leisure mode,
Short press to enter reading mode.
Short press to enter breastfeed mode.
Short press to enter night light mode.
Short press to enter work mode.

How to match the lamp and remote control?

Make sure the remote control is matching the lamp:
power plug in the lamp, use the remote to control the lamp. Normally the remote controls the lamp perfectly;

If remote control doesn’t work for the lamp, please re-match the Remote and Lamp.

Matching procedure:

1. Press the Remote control’s switch button (power switch button), hold pressing until match successfully.

2. Power plug in , then the light on automatically.

3. Continue hold pressing the power switch button for seconds , when LED lights flashes , matching successfully.

Installation

It’s very easy to install, as shown below:

Step 1: Connect the iron pipe with the light base by spinning clockwise.
Step 2 : Then connect the iron pipe with the other iron pipes by spinning clockwise.
Step 3: At last, connect the iron pipe with the LED round light by spinning clockwise. The installation is finished, then plug in adapter, you can touch control or remote control the light.

Product Care

• Please do not bend violently the lamp head to avoid damage when adjusting the angle of the lamp.
• Please read the user manual before use.
• Suggest Indoor use. It is non waterproof. Do not use this product in humid environments or at high temperatures.
• Cut off the power when cleaning it or not using it.
• Do not use it exceed the voltage, the proper voltage for US is AC110- 120V, 60Hz.
• Please use the included power adapter, do not use other brand’s adapter. Do not plug or unplug the power cord with wet hands.
• Please stop use it if there is any defective issues found in the product.
  

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>