SVEN USB 2.0 Gaming Speaker System with Bluetooth User Manual

June 9, 2024
SVEN

SVEN USB 2.0 Gaming Speaker System with Bluetooth User Manual
SVEN USB 2.0 Gaming Speaker System with Bluetooth

Congratulations on your purchase of the SVEN speaker system!

COPYRIGHT

© SVEN PTE. LTD. Version 1.0 (04.10.2021).
This Manual and information contained in it are copyrighted. All rights reserved

BUYER RECOMMENDATIONS

  • Unpack the device carefully. Make sure there are no accessories left in the box. Check up the device for damage; if the product was damaged during transportation, address the firm which carried out the delivery; if the product functions incorrectly, address the dealer at once.
  • Shipping and transportation equipment is permitted only in the original container.
  • Does not require special conditions for realization.
  • Dispose of in accordance with regulations for the disposal of household and computer equipment.
  • The date of manufacture of the product is indicated on the box.

PACKAGE CONTENTS

  • Speaker — 1 pc
  • User Manual — 1 pc
  • Warranty card — 1 pc

SAFETY PRECAUTIONS

  • Do not open the MSS and do not perform repairs by yourself. Service and repairs should be performed only by qualified specialists at authorized service centers. The list of authorized service centers is on www.sven.fi.
  • Do not allow the circuit of wires (including the grounded ones) between the speakers, on the power amplifier or the ground, for it causes damage to the power amplifier output stage.
  • Make sure that foreign objects do not get inside the holes of the GSS.
  • Protect the GSS from high humidity, water and dust.
  • Protect the GSS from heating: do not place it closer than 1 m from a heat source. Do not expose it to direct sunlight.
  • Do not use any chemical agents for cleaning. Clean it with dry soft cloth only.
  • If the GSS does not operate, unplug it and address your dealer.

TECHNICAL DESCRIPTION

SVEN 450 2.0 Gaming Speaker System (MSS) is designed to play music and sound games, movies, etc. The MSS has a built-in audio and signal cable enabling to connect it to a PC, laptop, MP3 player and other audio devices. The MSS is powered via a PC or laptop USB port, or via a 5V DC power supply with the built-in USB power cable.

MSS special features

  • Touch button control of dynamic RGB lighting
  • Touch button for changing working modes
  • Front panel volume control
  • USB powered

Speaker system description

  1. Backlight switch

  2. Turn on (turn the volume control to the right) / turn off (turn the volume control to the left until it clicks);
    Volume increase – turn the volume knob clockwise;
    Volume decrease – turn the volume knob counterclockwise

  3. AUX-Bluetooth mode change
    Speaker system description

PREPARATION AND OPERATION

Speaker placement

  • Place MSS far away from monitors and TV sets, as insignificant image distortion in these supersensitive devices is possible.

MSS Connecting

SVEN 450 2.0 USB Gamin Speaker System can be connected to virtually any audio source: MP3 player, PC sound card, etc. (see connection diagram, Fig. 2).

  1. Before making any connections, make sure that the MSS power supply is disconnected. Plug the built-in 3.5 mm mini-jack signal cable into the audio output jack of your sound source (see connection diagram, Fig. 2).
  2. Connect the built-in USB power cable to a USB port of your PC, laptop or to a 5V DC power supply (not included).
  3. Turn on your audio source.
  4. Adjust the volume level with the knob 2.

Bluetooth mode:

  • Turn on the speaker in Bluetooth mode by pressing a button 3.
  • It is necessary to select the search mode of devices with Bluetooth on a signal source.
    «SVEN 450» massage will be displayed on the screen which is to be connected to. Start playing audio on the source device and adjust the volume using the volume control 2.

RGB backlight

  • Press touch button 1 to switch between different colors and effects.

Note:

  • After finishing using the MSS, mind to switch it off.
    Conection

TROUBLESHOOTING

Problem Cause Solution
The MSS does notturn on. The MSS isn’t connected toa mains outlet. Check the

connection.
No sound.| The volume level is set atminimum value.| Turn up the volume.
Improperly connectedaudio source.| Check the connection of thesignal source.
There is too quiet sound of speakers.| The volume level is set atminimum value.| Turn up the volume.
Distortion of sound.| Large amplitude of theinput signal.| Turn down the sourcevolume and MSS volume.

If none of the above methods can not solve the problem, please seek professional advice at your nearest service center. Never attempt to repair the product yourself.

TECHNICAL SPECIFICATIONS

Parameter, measurement unit Value
Output power (RMS), W 10 (2 × 5)
Frequency response, Hz 80 – 20 000
Speaker diameter, mm Ø 46
Power supply, V USB/      5 V
Rated current, А 0.07
Dimensions (one speaker) (W × H × D), mm 440 × 90 × 90
Weight, kg 0.775

Notes:

  • Technical specifications given in this table are supplemental information and cannot give occasion to claims.
  • Technical specifications and package contents are subject to change without notice due to the improvement of SVEN production.

Model: SVEN 450

Importer: Tiralana OY, Office 102, Kotolahdentie 15, 48310 Kotka, Finland.

® Registered Trademark of Oy SVEN Scandinavia Ltd. Finland.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

SVEN User Manuals

Related Manuals