YTDRGB YTD-FL-001 Floor Lamp User Manual

USER MANUAL
Floor Lamp

Customer Service
Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
Email: ytdrgbfloorlamp@outlook.com
Important
You may be asked to provide proof of purchase, such as a screenshot of the order number or order details. If you can attach a video or photo to describe the problem, we would appreciate it.

Safety Instructions

Read and follow ali safety instructions in this manual:

1. YTDRGB floor lamp uses a replaceable light source. Within one year, if the light source does not work or quality problems, please contact us and inform your shipping address, we will send you a new light source for free; if more than one year of use, the light source does not work, it is recommended to purchase a light source through our store, if you do not know how to order, please contact us, thank you. In addition, this f loor lamp is for indoor use only.
2. Avoid minefields, strong magnetic fields, humid and high -voltage areas during installation.
3. Ensure the wiring is correct and firm to avoid accidents such as short circuit damage to components and burnout of the controller.
4. Please check whether the input power supply of the controller (must be matched according to the power supply voltage of the controller) meets the product requirements.
5. Any problem, please don’t repair it without permission, please contact seller.

Product Description

Thanks for choosing the YTDRGB Smart Floor Lamp. This floor lamp is designed with a minimalist and modern style. Creates a soft, cozy atmosphere in your home with its wide range of choices from 16 Million kinds of colors. There are three ways to control this floor lamp, control box, Smart Life APP, and remote control. You can also apply multiple preset scene modes, music modes, timing function,or even customize your own effects by DIY mode from the app. The connection with Alexa or Google Assistant bring you smart life by smart voice control.
Product list

1. Floor Lamp*1
2. Power Adapter*1
3. Remote Control*1
4. Screw*8
5. Magnetic Screwdriver*1
6. Battery backup*1
7. User Manual*1

Control Box Instructions Remote Control Instructions

Product Specifications

Model: YTD-FL-001
Light pole material: Aluminum Alloy+Non-toxic Silicone
Lamp Bead Type: 5050RGBW+IC
Number of Lamp Beads: 114PCS
Output Power: 28W
Output Voltage: AC85V-265V
Control Distance: 5-10 meters
Working Temperature: -25°C-+85°C
Beam Angle: 160°
Packing Size: 42197cm
How to install the floor lamp

1. Connect four lamp posts, reinforce the lamp bars with magnetic screwdriver and screws
2. Tear off the double-sided adhesive on the back of the light bar to install the light bar on the lamp post
3. Feed the wires on the light bar through thebottom pole that ensure the exposed wires are inside the lamp base
4. Straighten the silicone strip, align t with the topl ight pole and press down into the top pole then press into second and bottom pole
5.  Snap the top latch and bottom cover nto the poles
6.  Rotate and fix the amp post according to the direction of the base
7. Connect the adapter to the cable of the lamp base and plug the adapter nto a power outlet totest ighting. The lamp full lighting, which means the nstallation is successful

Smartlife APP Download

https://smartapp.tuya.com/smartlife

1. Register an account and choose your countr
2. Connect your phone to WiFi (Only 2.4Ghz)/Open the data network/Turn on the phone’ s Bluetooth.

Networking Method

• Device name: DFQY-CS14
• Turn on device, long press the control box” ” button 5s, the floor lamp flashes red, the device enters the network configuration state.

1. Automatic Networking:
   (1) Turn on the phone’ s Bluetooth & WiFi,Login Smart Life APP:
   Pop up the reminder of adding devices within the Bluetooth search range of the mobile phone(figure 1 ). Enter your WiFi account and password(figure 2). Complete the device addition (figure 3/4).(2) When no add reminder pops up,Enter the add inte rface through [Add Device] n the middle of the screen or [ + J on the upper right of the screen. At this time, the Bluetooth search continues to work, and the search status is displayed on the top of the screen. After searching for the product to be added, click the product icon (Figure 5), and follow the prompts to complete the addition.

2. Connect your phone to WiFi, Manual networking: (1) Select the Atmosphere amp (Wi-Fi+BLE) in the Lighting category (Figure 1 ), select Next (Figure 2) to enter the 2.4G network selection interface (Figure 3) At this time, the light bar status selection (Blink Slowly/ Blink Quickly) interface (Figure 4). 2) When the light panel on the back of the floor lamp Blink Quickly, enter WiFi account and password (Figure 1), and follow the interface operation prompts to complete the the device addition (Figure 2/3). After the network distribution is successful, the default white light will be on.(3) When the light bar Blink Slowly, enter WiFi account and  password(Figure 1). To enter the AP hotspot configuration network jump interface (Figure 2). Click to jump to the mobile network settings (Figure 3), select the SmartLife- ××× hotspot and return to the Smart Life APP, waiting for the APP to automatically complete the network configuration.

APP Control Interface Description
The APP control interface is divided into 5 functional sections:

1. switch On/Off: Only control the light on and off status of the light strip, without disconnecting the network connection between the mobile phone and the product.

2. Static color setting: The static color setting display area of the light
   Filling: Set a single color for the entire section of the light
   Paint: Click to select a color in the color selection area of the page, and click the light segment you want to change color in the light segment area to change the light segment to another color.
   Erase: Click the lamp segment whose color you want to erase in the lamp segment area, so that the corresponding lamp beads of the lamp segment will go out. (No memory function.)
   Color mixing: the lamp segment is set in two or more colors, so that the colors of the lamp beads of three adjacent IC points are mixed colors, natural colors, and mixed colors.
   Switch between different light strip color setting interfaces.
   When the whole light strip has the same static color, the brightness can “9: 100% be set here.

3. Scene Mode: The scene mode is divided into five sub -categories: DIV, landscape, life, festival and mood. The DIV subclass has no interface when no custom scene is added. You can make custom settings and save additions via . The newly added custom scene will be arranged n front of the APP default scene.Thereare44APPdefaultscenariosin four subcategories.
   Unchangeable can be selected.DIV scene setting interface:
   DIV scene setting can customize and save the color, motion mode, speed, direction, brightness, etc. of the light.

4. Music mode: Rhythm mode is divided into local mode and APP mode:
   6 local rhythm modes: through the microphone radio of the controller, the ight strip changes with the rhy1hm of the radio.
   3 APP rhythm modes: keep in the current interface of the APP usic mode and use the mobile phone microphone to make the light strip change with the rhythm of the radio.
   After the interface is switched, the light strip stops moving and the red light stays on.

5. Switch light settings: It can be set to turn on the light immediately, turn off the Ii ght or switch the light on and off periodically.

NOTE

1. Confirm the home router Wi-Fi signal type because a 2.4 GHz Wi-Fi is required to add a device.
2. Wrong password is the main reason why pairing fails. Please check your password and try again.
3. To ensure successful pairing, we suggest you enabling the following access, such as location, Wi-Fi, Bluetooth etc.
4. Please complete the pairing within three minutes after the device s reset.

Alexa Connect

1. Complete the product networking configuration in the Smart Life App Follow the instructions in the Smart Life App to complete the network configuration
   Note: In the Smart Life App configuration, change the device name to a name that is easily recognized by Alexa, usually an English name such as”bedroom light”.

2.  Configure the Amazon Echo device
   1. If you have already configured your Amazon Echo, you can skip this step, the following instructions focus on the iOS client. Make sure your Amazon Echo device is powered on and connected to a Wi-Finet work;
   2. Open the Alexa App on your phone, after logging in successfully, click the menu in the upper left corner of the Home page, select “Settings”, and click “Set Up a New Device” to set up the Amazon Echo device;3. Select your Amazon Echo device type and language to connect to the Internet, press and hold the small dot on the device according to the operation prompt until the light turns yellow, and then click “Continue” to enter the connection hotspot;4. After connecting to the Amazon Echo’s hotspot, return to then click “Continue” to enter the next step, select a Wi-Fi network to connect to, and the Amazon Echo will try to connect to the network for a few minutes;After the network conne ction is successful, click “Continue”, and an introduction video will appear. After the video is played, click “Continue” to jump to the Alexa Home page. At this point, the Amazon Echo configuration process is over.
   Key Steps-Binding Skills
   (1) Click to enter “Skills” in the Alexa App menu;2. Then search for “App Name” (the name of the app you need to bind the skill to). Click “Enable” to enable the Skill; 3. After entering, enter the App account password, and then click “Link Now” to bind your App account, you can  activate the Skill, and you can start your smart home journey.

3. Common control words Control your device with your voice You can now use your Echo to control your smart device. You can control your device (eg bedroom ight) with the following commands:

• “Alexa, make the iving room lights warmer.”
• “Alexa, set the dining room ights cooler:
• “Alexa, set the dining room softer.”
• “Alexa, make the living room light whiter.”
• “Alexa, make the living room light warm white.”
• “Alexa, set the kitchen todaylight.”
•  Alexa, turn on ”
• “Alexa, turn off ”
•  Alexa, set the front porch light to blue.”
• “Alexa, set the bedroom light to red.”
•  Alexa, change the kitchen to the color blue.”
• Alexa, set the bedroom ight to fifty percent.
• “Alexa, brighten .”
• “Alexa, dim .”

Google Assistant Connect

1. Confirm that the smart device has been added to the Smart Life App and the device is online.
2. Confirm that the Google Home app s installed.
3. Click My n the lower right corner, click Google Assistant, click Connect Google Assistant.
4. The Smart Life App will pull up the Google Home App, click Link
5. Click to confirm authorization
6. Wait for the loading to complete and the smart device will be synced to Google Assistant. At this point, you can use Google Assistant or Google Home App to control smart  devices. Next you can assign rooms to devices in the Google Home app.

If your phone does not have the Smart Life App installed, there is another way:

1. Open the Google Home App and tap the plus sign in the upper left corner
2. Click to set up device
3. Click Compatible with Google Service Search for Smart Life and click Smart Life
4. Click Link
5. At this time, the smart life app login page will open, and you can enterthe account password of the smart life app to complete the authorization

Troubleshooting

• Remote control cannot be used.
  Remove the plastic foil from the remote control.

•  Unable to download Smart Life APP.

• Mobile APP supports ios 10.0 or higher, Android requires
  Android 4.4 or higher.

• About cleaning lamps.
  Do not use polishes or cleaners on your lights,just wipe with a soft cloth or rag.

• Issue problems in using the Smart Life App, Open Smart Life APP, tap [Me]-[FAQ & Feedback] – [Consult].
  you also can put forward your suggestions and problems, so that we can upgrade the software and better serve our customers.

FCC WARNING
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause harmful nterference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the imits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur n a particular installation. f this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver s connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>