HAGOR 8207 BrackIT Stand Single Instruction Manual
- June 9, 2024
- HAGOR
Table of Contents
- 8207 BrackIT Stand Single
- Required for installation
- Component checklist
- Assemble the base
- Assemble of the columns
- Attach the connector to the column
- Attach VESA bracket to the mounting plate
- Hang and secure the screen
- Cable management
- Dimensions
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Installationsanleitung
BrackIT® Stand Single
Art.-Nr.: 8207
8207 BrackIT Stand Single
Caution!
Technical devices are of considerable value. You should therefore handle the
components carefully during installation and protect them if necessary.
If necessary, the installation area should also be secured. Falling parts can
cause injuries and material damage.
The materials included in the scope of delivery may not be suitable for the
special conditions at the installation site. Please check this in advance and
replace it with suitable materials if necessary.
If you are unsure about the installation of the product or have any questions,
please contact us or other trained specialists.
Required for installation
Component checklist
Package P
Package M
Assemble the base
Lock the brakes on the casters to avoid any sudden movements during installation.
Assemble of the columns
Attach the connector to the column
Loosen the screws to leave a gap over 4 mm
Attach VESA bracket to the mounting plate
Attach TV bracket to flat back screen
Attach TV bracket to irregular back screen
Hang and secure the screen
Assemble the camera shelf
Assemble the top cover
Cable management
TV orientation
Adjustment
Height markings represent the distance from the floor to the center of the screen.
Dimensions
HAGOR Products GmbH | Oberbecksener Straße 97
| D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0
Mail: hagor@hagor.de