DREAMLED RFB-30 RF LED Ball User Manual

RFB-30 RF LED Ball
User Manual 30 CM
——- Manual/DreamLED RFB-30/05-17/V02 ———-
Copyright © DreamLED®

RFB-30 RF LED Ball

PACKAGE CONTENTS

The DreamLED Ball consists of:

• LED Ball
• Induction plate for charging LED Ball
• RGB RF remote control
• 230V DC adapter

FEATURES & INSTALLATION TIPS

• Can be used indoor and outdoor, from home decoration to lighting in the bedroom or the swimming pool
• Wireless induction charging
• Low carbon, energy-saving, and environmental production
• Safe and reliable with aluminum coating battery, protected against high temperatures and explosion resistant
• Long life span, with high brightness RGB latest generation LED
• High degree of protection, IP68, 100% waterproof
• High-tenacity, against deformation, not easily broken
• The way to extend the battery life is charging promptly when power is low
• The remote control, adapter and charging plate are NOT waterproof. Please keep away from water.

CHARGING INSTRUCTIONS

1. Connect the adapter with the induction charging plate and plug into an outlet with an input voltage of 100V-240V AC.
   See illustration 1

2. Place the LED Ball on top of the induction charging plate to charge. The indicator light on the charging plate and the adapter will be red.
   See illustration 2

3. The indicator light from adapter & charging plate will turn green when fully charged (charging time = approx. up to 9 hours).

Note: When the lamp is fully charged but not in use (standby mode), it will still use power. This means that the battery capacity will go down from 100% to 0% within a certain period of time. Exact time depends on the last used settings. Please recharge first when needed.

DESCRIPTION OF THE RF REMOTE CONTROL

Note: One remote control can be paired to max. 8 LED lights in a range of max. 15~20 meters. To pair the remote control with extra LED lights: Turn off the light for more than 8 seconds. Then press and hold the OFF button for more than 3 sec.
The light will flash 2x in green color to confirm that the pairing with the remote control has been successful. See illustration 3

1. ON/OFF: Turn the LED Ball ON/OFF
2. DIM-keys: Brighten or darken the chosen color
3. Main colors: Red, green, blue and white
4. Predefined colors: Change the main colors
5. FLASH: The LED Ball will flash in white color (*)
6. AUTO: All available light effects are shown one by one (*)
7. FADE 7: 7 colors of the LED Ball will slowly change, from one color shade to another, without flashing (*)
8. JUMP 7: 7 colors of the LED Ball will change quickly ()
   () The brightness of these light effects can be adjusted using the DIM buttons (3).

RESET BUTTON ON THE BOTTOM SIDE
See Illustration 4
Whenever a problem occurs with the LED Ball (fails to work or does not longer respond to the remote control) just press this button to reset the system. Place the LED Ball back on the charging plate and turn it on again using the remote control.

SAFETY INSTRUCTIONS

• Never open the LED Ball or the induction plate.
• Never touch the plug contacts with sharp or metal objects.
• Make sure that cables cannot cause a trip hazard.
• Use only the original power supply and original accessories.
• Never place the device in the vicinity of heat sources.
• Never place the unit on surfaces that are heat sensitive.
• Protect the device from special liquids and vapors.
• Unplug the unit at the main power socket before cleaning. Do not use any solvent based cleaning agents, only a soft, dry anti-static cloth.
• Do not attempt repairs yourself.
• If the unit is not properly installed or operated DreamLED® cannot accept liability.

TECHNICAL DATA

– Operating voltage: 100-240V AC, 50/60 Hz
– Power supply: Euro
– Power consumption: max 8 watts
– Ambient operating temperature: -10 ~40 °C
– Humidity: 10% – 85% (none condensing)
– Storage temperature: -20 ~ 60 °C
– Storage humidity: 5% – 90% (none condensing)
– Protection class: LED Ball: IP68, Induction Plate: only for indoor use, Adapter: only for indoor use
LED Ball:
LED RGB IP68
DC 7,5V, 1A, 8W
16x EPISTAR LEDs, 2,8W total
Zollner 2500 Li-ion : up to 20 hours use
Max. 120 lumen
120° light angle
Dimensions (LWH): Ø 300 mm
Induction Plate: DC 7,5V at 1A
Remote: 433 MHz Radio Frequency 16 color buttons + 4 different color-light programs + DIM function + Auto
Battery: 2x AAA 1,5V
Adapter: Input: 100-240V

• Output: 7,5V / 1A (2A thermal fuse)
  SUPPORT
  For more information, technical questions and return requests concerning this product, you should contact support@dream-led.eu.

GUARANTEE

Copyright © DreamLED® . DreamLED ® is a registered trademark of TE-Group NV. The DreamLED® brand stands for superior product quality and outstanding customer service. That is why DreamLED® warrants this product against all defects in material and workmanship for a period of two (2) years from the date of original purchase of the product. The terms of this guarantee and the extent of responsibility of DreamLED® under this guarantee can be downloaded from our website
www.dream-led.eu.

DECLARATION OF CONFORMITY

Hereby,

declare that the following equipment:

conforms with the following safety requirements of the directives EC/1907/2006, 2014/30/EU, 2014/35/EU, 2014/53/EU & 2011/65/EU. Conformity is guaranteed by the CE-symbol.
This product has been tested against following standards and specifications, applying versions valid in May 2017.
EN 55015:2013
EN 61547:2009
EN 61000-3-2:2014
EN 61000-3-3:2013
EN 60950-1:2006:A2:2013
EN 62479:2010
EN 301489-1 V2.1.1(2017-02)
EN 301489-3 V2.1.0 2016-09)
ETSI EN 300220-1 V3.1.1(2017-02)
ETSI EN 300220-2 V3.1.1(2017-02)
EN 61000-4-2:2009
EN 61000-4-3:2006+A1:2008+A2:2010
EN 61000-4-4:2012
EN 61000-4-5:2014
EN 61000-4-6:2014
EN 61000-4-8:2010
EN 61000-4-11:2004
EN 60598-1:2015
EN 60598-2-1: 1989
IEC 62321

Authorized Signature
S. Izaks, TE-Group NV, Product & Research Manager
May 2017, Kapellen

References

• For Sale - Safenames Domain
• dream-led.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>